At the same time, if you have problems with downloading and installing, Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) torrent prep also has dedicated staff that can provide you with remote online guidance. In order to allow you to use our products with confidence, 350-401 Testing Engine test guide provide you with a 100% pass rate guarantee. Once you unfortunately fail the exam, we will give you a full refund, and our refund process is very simple. It all starts from our 350-401 Testing Engine learning questions. Come and buy our 350-401 Testing Engine practice engine, you will be confident and satisfied with it and have a brighter future. Our 350-401 Testing Engine study materials can satisfy their wishes and they only spare little time to prepare for exam.
CCNP Enterprise 350-401 They are quite convenient.
CCNP Enterprise 350-401 Testing Engine - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) With the rapid development of the world economy, it has been universally accepted that a growing number of people have longed to become the social elite. Do you want to find a job that really fulfills your ambitions? That's because you haven't found an opportunity to improve your ability to lay a solid foundation for a good career. Our 350-401 Key Concepts quiz torrent can help you get out of trouble regain confidence and embrace a better life.
So a lot of people long to know the 350-401 Testing Engine study questions in detail. In order to meet the demands of all people, our company has designed the trail version for all customers. We can promise that our company will provide the demo of the 350-401 Testing Engine learn prep for all people to help them make the better choice.
Cisco 350-401 Testing Engine - You will become friends with better people.
Are you an IT staff? Are you enroll in the most popular IT certification exams? If you tell me "yes", then I will tell you a good news that you're in luck. Omgzlook's Cisco 350-401 Testing Engine exam training materials can help you 100% pass the exam. This is a real news. If you want to scale new heights in the IT industry, select Omgzlook please. Our training materials can help you pass the IT exams. And the materials we have are very cheap. Do not believe it, see it and then you will know.
We will adopt and consider it into the renovation of the 350-401 Testing Engine exam guide. Anyway, after your payment, you can enjoy the one-year free update service with our guarantee.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
IIA IIA-CIA-Part1-KR - So the choice is important. We have clear data collected from customers who chose our SAP C_TS462_2023 practice braindumps, and the passing rate is 98-100 percent. Omgzlook Cisco IAPP CIPT exam training materials will be the first step of your achievements. To make our ISACA CRISC simulating exam more precise, we do not mind splurge heavy money and effort to invite the most professional teams into our group. After you used Omgzlook Cisco SAP C-S4CFI-2402 dumps, you still fail in SAP C-S4CFI-2402 test and then you will get FULL REFUND.
Updated: May 28, 2022