Our 350-401 Test Pass4Sure study tool can help you obtain the 350-401 Test Pass4Sure certification and own a powerful weapon for your interview. Our 350-401 Test Pass4Sure qualification test will help you gain recognition with true talents and better adapted to society. Now, I would like to give you a brief introduction in order to make you deepen your impression of our 350-401 Test Pass4Sure test guides. Are you still worried about whether or not our 350-401 Test Pass4Sure materials will help you pass the exam? Are you still afraid of wasting money and time on our materials? Don’t worry about it now, our 350-401 Test Pass4Sure materials have been trusted by thousands of candidates. They also doubted it at the beginning, but the high pass rate of us allow them beat the 350-401 Test Pass4Sure at their first attempt. Helping candidates to pass the 350-401 Test Pass4Sure exam has always been a virtue in our company’s culture, and you can connect with us through email at the process of purchasing and using, we would reply you as fast as we can.
CCNP Enterprise 350-401 This is a practice test website.
And many of our cutomers use our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Pass4Sure exam questions as their exam assistant and establish a long cooperation with us. Omgzlook site has a long history of providing Cisco New Exam 350-401 Collection Sheet exam certification training materials. It has been a long time in certified IT industry with well-known position and visibility.
Provided that you lose your exam with our 350-401 Test Pass4Sure exam questions unfortunately, you can have full refund or switch other version for free. All the preoccupation based on your needs and all these explain our belief to help you have satisfactory and comfortable purchasing services on the 350-401 Test Pass4Sure study guide. We assume all the responsibilities our 350-401 Test Pass4Sure simulating practice may bring you foreseeable outcomes and you will not regret for believing in us assuredly.
Cisco 350-401 Test Pass4Sure - A bold attempt is half success.
Our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam questions are designed by a reliable and reputable company and our company has rich experience in doing research about the study materials. We can make sure that all employees in our company have wide experience and advanced technologies in designing the 350-401 Test Pass4Sure study dump. So a growing number of the people have used our study materials in the past years, and it has been a generally acknowledged fact that the quality of the 350-401 Test Pass4Sure test guide from our company is best in the study materials market. Now we would like to share the advantages of our 350-401 Test Pass4Sure study dump to you, we hope you can spend several minutes on reading our introduction; you will benefit a lot from it.
Using 350-401 Test Pass4Sure real questions will not only help you clear exam with less time and money but also bring you a bright future. We are looking forward to your join.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
Our Nutanix NCP-DB study materials can have such a high pass rate, and it is the result of step by step that all members uphold the concept of customer first. These VMware 2V0-31.24 exam pdf offers you a chance to get high passing score in formal test and help you closer to your success. Scrum SPS - In the process of development, it also constantly considers the different needs of users. The frequently updated of AAPC CPC latest torrent can ensure you get the newest and latest study material. Databricks Databricks-Machine-Learning-Associate - This certification gives us more opportunities.
Updated: May 28, 2022