Someone asked, where is success? Then I tell you, success is in Omgzlook. Select Omgzlook is to choose success. Omgzlook's Cisco 350-401 Questions Fee exam training materials can help all candidates to pass the IT certification exam. Just take action to purchase we would be pleased to make you the next beneficiary of our 350-401 Questions Fee exam practice. Trust us and you will get what you are dreaming! A bad situation can show special integrity.
CCNP Enterprise 350-401 Omgzlook is worthy your trust.
We are willing to provide all people with the demo of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Questions Fee study tool for free. Valid 350-401 Test Preparation exam seems just a small exam, but to get the Valid 350-401 Test Preparation certification exam is to be reckoned in your career. Such an international certification is recognition of your IT skills.
Because many users are first taking part in the exams, so for the exam and test time distribution of the above lack certain experience, and thus prone to the confusion in the examination place, time to grasp, eventually led to not finish the exam totally. In order to avoid the occurrence of this phenomenon, the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study question have corresponding products to each exam simulation test environment, users log on to their account on the platform, at the same time to choose what they want to attend the exam simulation questions, the 350-401 Questions Fee exam questions are automatically for the user presents the same as the actual test environment simulation test system, the software built-in timer function can help users better control over time, so as to achieve the systematic, keep up, as well as to improve the user's speed to solve the problem from the side with our 350-401 Questions Fee test guide.
Cisco 350-401 Questions Fee - Our key advantages are that 1.
Perhaps you have wasted a lot of time to playing computer games. It doesn’t matter. It is never too late to change. There is no point in regretting for the past. Our 350-401 Questions Fee exam questions can help you compensate for the mistakes you have made in the past. You will change a lot after learning our 350-401 Questions Fee study materials. And most of all, you will get reward by our 350-401 Questions Fee training engine in the least time with little effort.
If you are urgent to pass exam our exam materials will be suitable for you. Mostly you just need to remember the questions and answers of our Cisco 350-401 Questions Fee exam review questions and you will clear exams.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
It is known to us that more and more companies start to pay high attention to the Avaya 72301X certification of the candidates. We offer you the most accurate HP HP2-I73 exam answers that will be your key to pass the certification exam in your first try. Microsoft AZ-400 - There are a lot of excellent experts and professors in our company. The NetSuite NetSuite-Financial-User test answers are tested and approved by our certified experts and you can check the accuracy of our questions from our free demo. CheckPoint 156-315.81 - You absolutely can pass the exam.
Updated: May 28, 2022