One more to mention, with our 350-401 Test Online test guide, there is no doubt that you can cut down your preparing time in 20-30 hours of practice before you take the exam. We have authoritative production team made up by thousands of experts helping you get hang of our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study question and enjoy the high quality study experience. We will update the content of 350-401 Test Online test guide from time to time according to recent changes of examination outline and current policies, so that every examiner can be well-focused and complete the exam focus in the shortest time. Checking our 350-401 Test Online free demo is a great way of learning the pattern of exam materials and if it suits what you wanted. There are valid 350-401 Test Online test questions and accurate answers along with the professional explanations in our study guide. To keep with the fast-pace social life, we make commitment to all of our customers that we provide the fastest delivery services on our 350-401 Test Online study guide for your time consideration.
Because it can help you prepare for the 350-401 Test Online exam.
We boost professional expert team to organize and compile the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Online training guide diligently and provide the great service. So it is of great importance for a lot of people who want to pass the exam and get the related certification to stick to studying and keep an optimistic mind. According to the survey from our company, the experts and professors from our company have designed and compiled the best New Practice Questions 350-401 Pdf cram guide in the global market.
If you purchase our 350-401 Test Online preparation questions, it will be very easy for you to easily and efficiently find the exam focus. More importantly, if you take our products into consideration, our 350-401 Test Online study materials will bring a good academic outcome for you. At the same time, we believe that our 350-401 Test Online training quiz will be very useful for you to have high quality learning time during your learning process.
Cisco 350-401 Test Online - Our website is a very safe and regular platform.
If you have been very panic sitting in the examination room, our 350-401 Test Online actual exam allows you to pass the exam more calmly and calmly. After you use our products, our 350-401 Test Online study materials will provide you with a real test environment before the 350-401 Test Online exam. After the simulation, you will have a clearer understanding of the exam environment, examination process, and exam outline. And our 350-401 Test Online learning guide will be your best choice.
However, when asked whether the Cisco latest dumps are reliable, costumers may be confused. For us, we strongly recommend the 350-401 Test Online exam questions compiled by our company, here goes the reason.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
The Software version of our Microsoft MB-210 study materials can simulate the real exam. EMC D-ISM-FN-23 - Our study materials provide varied versions for you to choose and the learning costs you little time and energy. And we have three different versions Of our PDMA NPDP study guide: the PDF, the Software and the APP online. We believe under the assistance of our IAM IAM-Certificate practice quiz, passing the exam and obtain related certificate are not out of reach. HP HPE0-V27 - Our research materials have many advantages.
Updated: May 28, 2022