350-401 Free - Cisco Valid Implementing Cisco Enterprise Network Core Technologies 350-401 Encor Test Syllabus - Omgzlook

To let the client be familiar with the atmosphere of the 350-401 Free exam we provide the function to stimulate the exam and the timing function of our 350-401 Free study materials to adjust your speed to answer the questions. We provide the stimulation, the instances and the diagrams to explain the hard-to-understand contents of our 350-401 Free study materials. For these great merits we can promise to you that if you buy our 350-401 Free study materials you will pass the test without difficulties. For the examinees who are the first time to participate IT certification exam, choosing a good pertinent training program is very necessary. Omgzlook can offer a specific training program for many examinees participating in IT certification exams. It is known to us that getting the 350-401 Free certification is not easy for a lot of people, but we are glad to tell you good news.

CCNP Enterprise 350-401 A bad situation can show special integrity.

And we believe you will pass the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Free exam just like the other people! Since to choose to participate in the Cisco Reliable Vce 350-401 Exam Simulator certification exam, of course, it is necessary to have to go through. This is also the performance that you are strong-willed.

Our 350-401 Freepractice materials will provide you with a platform of knowledge to help you achieve your dream. As you know, our v practice exam has a vast market and is well praised by customers. All you have to do is to pay a small fee on our 350-401 Free practice materials, and then you will have a 99% chance of passing the exam and then embrace a good life.

Cisco 350-401 Free - We provide one-year customer service; 4.

Perhaps you have wasted a lot of time to playing computer games. It doesn’t matter. It is never too late to change. There is no point in regretting for the past. Our 350-401 Free exam questions can help you compensate for the mistakes you have made in the past. You will change a lot after learning our 350-401 Free study materials. And most of all, you will get reward by our 350-401 Free training engine in the least time with little effort.

If you are urgent to pass exam our exam materials will be suitable for you. Mostly you just need to remember the questions and answers of our Cisco 350-401 Free exam review questions and you will clear exams.

350-401 PDF DEMO:

QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 4
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.

QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

PECB ISO-IEC-27001-Lead-Implementer - There is no doubt that the certification has become more and more important for a lot of people, especial these people who are looking for a good job, and it has been a general trend. Huawei H19-438_V1.0 - Please totally trust the accuracy of questions and answers. Google Professional-Cloud-Network-Engineer - So stop hesitation and buy our study materials. The HP HPE0-V28 test answers are tested and approved by our certified experts and you can check the accuracy of our questions from our free demo. So you just need to memorize our correct questions and answers of the CIW 1D0-623 study materials.

Updated: May 28, 2022