If you still worried about whether or not you pass exam; if you still doubt whether it is worthy of purchasing our software, what can you do to clarify your doubts that is to download free demo of 350-401 Test Guide. Once you have checked our demo, you will find the study materials we provide are what you want most. Our target is to reduce your pressure and improve your learning efficiency from preparing exam. You just should take the time to study 350-401 Test Guide preparation materials seriously, no need to refer to other materials, which can fully save your precious time. To keep up with the changes of the exam syllabus, our 350-401 Test Guide practice engine are continually updated to ensure that they can serve you continuously. If you think i'm exaggerating, you might as well take a look at our 350-401 Test Guide actual exam.
CCNP Enterprise 350-401 I wish you good luck.
Omgzlook website is fully equipped with resources and the questions of Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Guide exam, it also includes the Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Guide exam practice test. If you use Omgzlook'straining program, you can 100% pass the exam. If you fail the exam, we will give a full refund to you.
It is a professional exam materials that the IT elite team specially tailored for you. Passed the exam certification in the IT industry will be reflected in international value. There are many dumps and training materials providers that would guarantee you pass the Cisco 350-401 Test Guide exam.
Cisco 350-401 Test Guide - We absolutely protect the interests of consumers.
Are you worrying about how to pass Cisco 350-401 Test Guide test? Now don't need to worry about the problem. Omgzlook that committed to the study of Cisco 350-401 Test Guide certification exam for years has a wealth of experience and strong exam dumps to help you effectively pass your exam. Whether to pass the exam successfully, it consists not in how many materials you have seen, but in if you find the right method. Omgzlook is the right method which can help you sail through Cisco 350-401 Test Guide certification exam.
We can guarantee that you can pass the Cisco 350-401 Test Guide exam the first time. If you buy the goods of Omgzlook, then you always be able to get newer and more accurate test information.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
What's more, what make you be rest assured most is that we develop the exam software which will help more candidates get CIW 1D0-724 exam certification. SAP C_S4CS_2408 - How do you want to prove your ability? More and more people prove themselves by taking IT certification exam. We will be with you in every stage of your IBM C1000-127 exam preparation to give you the most reliable help. EMC D-DS-OP-23 - There is no reason to waste your time on a test. If you are tired with the screen for study, you can print the Cisco 350-601 pdf dumps into papers.
Updated: May 28, 2022