All real questions just need to practice one or two days and remember the answers will save you much time in 350-401 Sample Online real exam. Come and join us. Checking our 350-401 Sample Online free demo is a great way of learning the pattern of exam materials and if it suits what you wanted. To keep with the fast-pace social life, we make commitment to all of our customers that we provide the fastest delivery services on our 350-401 Sample Online study guide for your time consideration. As most of the people tend to use express delivery to save time, our 350-401 Sample Online preparation exam will be sent out within 5-10 minutes after purchasing. This version provides only the questions and answers of 350-401 Sample Online exam braindumps but also some functions easy to practice and master.
All 350-401 Sample Online actual exams are 100 percent assured.
Differ as a result the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample Online questions torrent geared to the needs of the user level, cultural level is uneven, have a plenty of college students in school, have a plenty of work for workers, and even some low education level of people laid off, so in order to adapt to different level differences in users, the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample Online exam questions at the time of writing teaching materials with a special focus on the text information expression, as little as possible the use of crude esoteric jargon, as much as possible by everyone can understand popular words to express some seem esoteric knowledge, so that more users through the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample Online prep guide to know that the main content of qualification examination, stimulate the learning enthusiasm of the user, arouse their interest in learning. Our veteran professional generalize the most important points of questions easily tested in the 350-401 Valid Exam Guide Materials practice exam into our practice questions. Their professional work-skill paid off after our 350-401 Valid Exam Guide Materials training materials being acceptable by tens of thousands of exam candidates among the market.
How you can gain the 350-401 Sample Online certification with ease in the least time? The answer is our 350-401 Sample Online study materials for we have engaged in this field for over ten years and we have become the professional standard over all the exam materials. You can free download the demos which are part of our 350-401 Sample Online exam braindumps, you will find that how good they are for our professionals devote of themselves on compiling and updating the most accurate content of our 350-401 Sample Online exam questions.
Because it can help you prepare for the Cisco 350-401 Sample Online exam.
Which kind of 350-401 Sample Online certificate is most authorized, efficient and useful? We recommend you the 350-401 Sample Online certificate because it can prove that you are competent in some area and boost outstanding abilities. If you buy our 350-401 Sample Online study materials you will pass the test smoothly and easily. We boost professional expert team to organize and compile the 350-401 Sample Online training guide diligently and provide the great service.
However, we need to realize that the genius only means hard-working all one’s life. It means that if you do not persist in preparing for the 350-401 Sample Online exam, you are doomed to failure.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
More importantly, if you take our products into consideration, our APMG-International AgilePM-Practitioner study materials will bring a good academic outcome for you. Snowflake COF-C02 - After all, no one can steal your knowledge. Our EMC D-OME-OE-A-24 exam dumps will lead you to success! Do not worry, in order to help you solve your problem and let you have a good understanding of our SAP C_TS4CO_2023 study practice dump, the experts and professors from our company have designed the trial version for all people. With the help of our Lpi 300-300 training guide, your dream won’t be delayed anymore.
Updated: May 28, 2022