For example, our learning material's Windows Software page is clearly, our 350-401 Dumps Download Learning material interface is simple and beautiful. There are no additional ads to disturb the user to use the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) qualification question. Once you have submitted your practice time, 350-401 Dumps Download study tool system will automatically complete your operation. Would you like to register Cisco 350-401 Dumps Download certification test? Would you like to obtain 350-401 Dumps Download certificate? Without having enough time to prepare for the exam, what should you do to pass your exam? In fact, there are techniques that can help. Even if you have a very difficult time preparing for the exam, you also can pass your exam successfully. Therefore, it is necessary for us to pass all kinds of qualification examinations, the 350-401 Dumps Download study practice question can bring you high quality learning platform.
CCNP Enterprise 350-401 As you know, life is like the sea.
If you are willing, our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dumps Download training PDF can give you a good beginning. Our experts made significant contribution to their excellence of the 350-401 Valid Exam Camp Questions study materials. So we can say bluntly that our 350-401 Valid Exam Camp Questions simulating exam is the best.
We provide our customers with the most reliable learning materials about 350-401 Dumps Download certification exam and the guarantee of pass. We assist you to prepare the key knowledge points of 350-401 Dumps Download actual test and obtain the up-to-dated exam answers. All 350-401 Dumps Download test questions offered by us are tested and selected by our senior experts in IT filed, which only need little time to focus on the practice and the preparation.
Cisco 350-401 Dumps Download - what a brighter future!
You have seen Omgzlook's Cisco 350-401 Dumps Download exam training materials, it is time to make a choice. You can choose other products, but you have to know that Omgzlook can bring you infinite interests. Only Omgzlook can guarantee you 100% success. Omgzlook allows you to have a bright future. And allows you to work in the field of information technology with high efficiency.
Or you will forget the so-called good, although all kinds of digital device convenient now we read online, but many of us are used by written way to deepen their memory patterns. Our 350-401 Dumps Download prep guide can be very good to meet user demand in this respect, allow the user to read and write in a good environment continuously consolidate what they learned.
350-401 PDF DEMO:
QUESTION NO: 1
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
SAP C_S4CPR_2402 - Omgzlook is a professional website that providing IT certification training materials. And not only you will get the most rewards but also you will get an amazing study experience by our Cisco 500-490 exam questions. WGU Organizational-Behaviors-and-Leadership - Because it will make you pass the exam easily, since then rise higher and higher on your career path. EMC D-VXR-OE-23 - Everyone has the right to pursue happiness and wealth. Citrix 1Y0-204 - It can give each candidate to provide high-quality services, including pre-sales service and after-sales service.
Updated: May 28, 2022