350-401 Questions Exam certifications are thought to be the best way to get good jobs in the high-demanding market. There is a large range of 350-401 Questions Exam certifications that can help you improve your professional worth and make your dreams come true. Our 350-401 Questions Exam certification practice materials provide you with a wonderful opportunity to get your dream certification with confidence and ensure your success by your first attempt. Although the pass rate of our 350-401 Questions Exam study materials can be said to be the best compared with that of other exam tests, our experts all are never satisfied with the current results because they know the truth that only through steady progress can our 350-401 Questions Exam preparation braindumps win a place in the field of exam question making forever. Therefore, buying our 350-401 Questions Exam actual study guide will surprise you with high grades and you are more likely to get the certification easily. If you use the quiz prep, you can use our latest 350-401 Questions Exam exam torrent in anywhere and anytime.
CCNP Enterprise 350-401 You will not need to struggle with the exam.
Nowadays, having knowledge of the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Questions Exam study braindumps become widespread, if you grasp solid technological knowledge, you are sure to get a well-paid job and be promoted in a short time. Most of the materials on the market do not have a free trial function. Even some of the physical books are sealed up and cannot be read before purchase.
More detailed information is under below. We are pleased that you can spare some time to have a look for your reference about our 350-401 Questions Exam test prep. As long as you spare one or two hours a day to study with our latest 350-401 Questions Exam quiz prep, we assure that you will have a good command of the relevant knowledge before taking the exam.
Cisco 350-401 Questions Exam - Now they have a better life.
If we waste a little bit of time, we will miss a lot of opportunities. If we miss the opportunity, we will accomplish nothing. Then, life becomes meaningless. Our 350-401 Questions Exam preparation exam have taken this into account, so in order to save our customer’s precious time, the experts in our company did everything they could to prepare our 350-401 Questions Exam study materials for those who need to improve themselves quickly in a short time to pass the exam to get the 350-401 Questions Exam certification.
Our learning materials are based on the customer's point of view and fully consider the needs of our customers. If you follow the steps of our 350-401 Questions Exam exam questions, you can easily and happily learn and ultimately succeed in the ocean of learning.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Adobe AD0-E207 - Learning our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) test practice dump can help them save the time and focus their attentions on their major things. The staff of Microsoft AZ-400 study materials is online 24 hours a day, seven days a week. Almost all candidates know our EMC D-PST-MN-A-24 exam questions as a powerful brand. Our SAP C-SIGPM-2403 practice materials are made by our responsible company which means you can gain many other benefits as well. HP HPE0-S60 - In the end, you will become an excellent talent.
Updated: May 28, 2022