As long as you get to know our 350-401 Vce Exam Simulator exam questions, you will figure out that we have set an easier operation system for our candidates. Once you have a try, you can feel that the natural and seamless user interfaces of our 350-401 Vce Exam Simulator study materials have grown to be more fluent and we have revised and updated 350-401 Vce Exam Simulator learning braindumps according to the latest development situation. Without doubt, we are the best vendor in this field and we also provide the first-class service for you. Now, you are fortunate enough to purchase our 350-401 Vce Exam Simulator study questions. Our study materials are compiled by professional experts. We have always been known as the superior after sale service provider, since we all tend to take lead of the whole process after you choose our 350-401 Vce Exam Simulator exam questions.
CCNP Enterprise 350-401 It's never too late to know it from now on.
CCNP Enterprise 350-401 Vce Exam Simulator - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) So our exam training materials is simulated with the practical exam. To address this issue, our Reliable 350-401 Test Experience actual exam offers three different versions for users to choose from. The PC version is the closest to the real test environment, which is an excellent choice for windows - equipped computers.
In recent years, many people are interested in Cisco certification exam. So, Cisco 350-401 Vce Exam Simulator test also gets more and more important. As the top-rated exam in IT industry, 350-401 Vce Exam Simulator certification is one of the most important exams.
Now Cisco Cisco 350-401 Vce Exam Simulator certification test is very popular.
No matter in the day or on the night, you can consult us the relevant information about our 350-401 Vce Exam Simulator preparation exam through the way of chatting online or sending emails. I’m sure our 24-hour online service will not disappoint you as we offer our service 24/7 on our 350-401 Vce Exam Simulator study materials. And we will give you the most considerate suggestions on our 350-401 Vce Exam Simulator learning guide with all our sincere and warm heart.
So our IT technicians of Omgzlook take more efforts to study 350-401 Vce Exam Simulator exam materials. All exam software from Omgzlook is the achievements of more IT elite.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Our company provides convenient service to the clients all around the world so that the clients all around the world can use our Cisco 350-501 study materials efficiently. Our Omgzlook devote themselves for years to develop the Amazon SAP-C02-KR exam software to help more people who want to have a better development in IT field to pass Amazon SAP-C02-KR exam. Salesforce Revenue-Cloud-Consultant-Accredited-Professional - We have employed a lot of online workers to help all customers solve their problem. Adobe AD0-E207 - Don't worry over trifles. You can rest assured to buy the Juniper JN0-664 exam dumps from our company.
Updated: May 28, 2022