In the course of your study, the test engine of 350-401 Practice Engine actual exam will be convenient to strengthen the weaknesses in the learning process. This can be used as an alternative to the process of sorting out the wrong questions of 350-401 Practice Engine learning guide in peacetime learning, which not only help you save time, but also makes you more focused in the follow-up learning process with our 350-401 Practice Engine learning materials. Each question in 350-401 Practice Engine pass guide is certified by our senior IT experts to improve candidates' ability and skills. The quality of training materials and the price of our 350-401 Practice Engine dumps torrent are all created for your benefit. And 350-401 Practice Engine study materials provide free trial service for consumers.
CCNP Enterprise 350-401 Trust us and you will get success for sure!
As a consequence you are able to keep pace with the changeable world and remain your advantages with our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Practice Engine training braindumps. We would like to provide our customers with different kinds of Practice 350-401 Exams practice guide to learn, and help them accumulate knowledge and enhance their ability. Besides, we guarantee that the Practice 350-401 Exams exam questions of all our users can be answered by professional personal in the shortest time with our Practice 350-401 Exams study dumps.
If you put just a bit of extra effort, you can score the highest possible score in the real 350-401 Practice Engine exam because our 350-401 Practice Engine exam preparation dumps are designed for the best results. Start learning the futuristic way. 350-401 Practice Engine exam practice software allows you to practice on real 350-401 Practice Engine questions.
It all starts from our Cisco 350-401 Practice Engine learning questions.
Only 20-30 hours on our 350-401 Practice Engine learning guide are needed for the client to prepare for the test and it saves our client’s time and energy. Most people may wish to use the shortest time to prepare for the test and then pass the test with our 350-401 Practice Engine study materials successfully because they have to spend their most time and energy on their jobs, learning, family lives and other important things. Our 350-401 Practice Engine study materials can satisfy their wishes and they only spare little time to prepare for exam.
When you see other people in different industry who feel relaxed with high salary, do you want to try another field? And is the difficulty of learning a new piece of knowledge often deterring you? It doesn't matter, now 350-401 Practice Engine practice exam offers you a great opportunity to enter a new industry. Our 350-401 Practice Engine learning material was compiled from the wisdom and sweat of many industry experts.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
We can make sure that our Cisco 300-425 study materials have the ability to help you solve your problem, and you will not be troubled by these questions above. You can free download the demos which present a small part of the EMC D-CI-DS-23 learning engine, and have a look at the good quality of it. We can promise that if you buy our products, it will be very easy for you to pass your IBM C1000-181 exam and get the certification. If you compare the test to a battle, the examinee is like a brave warrior, and the good VMware 6V0-32.24 learning materials are the weapon equipments, but if you want to win, then it is essential for to have the good VMware 6V0-32.24 study guide. With a total new perspective, Huawei H13-334_V1.0 study materials have been designed to serve most of the office workers who aim at getting an exam certification.
Updated: May 28, 2022