The content of our 350-401 Sample Online practice engine is based on real exam by whittling down superfluous knowledge without delinquent mistakes rather than dropping out of reality. Being subjected to harsh tests of market, our 350-401 Sample Online exam questions are highly the manifestation of responsibility carrying out the tenets of customer oriented. And our 350-401 Sample Online study materials are warmly praised and welcomed by the customers all over the world. According to the research statistics, we can confidently tell that 99% candidates have passed the 350-401 Sample Online exam. Several advantages we now offer for your reference. If you are unfamiliar with our 350-401 Sample Online practice materials, please download the free demos for your reference, and to some unlearned exam candidates, you can master necessities by our 350-401 Sample Online training prep quickly.
But our 350-401 Sample Online exam questions have made it.
If the user finds anything unclear in the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample Online exam questions exam, we will send email to fix it, and our team will answer all of your questions related to the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample Online actual exam. Every page is carefully arranged by our experts with clear layout and helpful knowledge to remember. Our 350-401 Exam Introduction exam questions just focus on what is important and help you achieve your goal.
Among all substantial practice materials with similar themes, our 350-401 Sample Online practice materials win a majority of credibility for promising customers who are willing to make progress in this line. With excellent quality at attractive price, our 350-401 Sample Online exam questions get high demand of orders in this fierce market. You can just look at the data about the hot hit on the 350-401 Sample Online study braindumps everyday, and you will know that how popular our 350-401 Sample Online learning guide is.
Cisco 350-401 Sample Online - Omgzlook can give you a brighter future.
Our company have the higher class operation system than other companies, so we can assure you that you can start to prepare for the 350-401 Sample Online exam with our study materials in the shortest time. In addition, if you decide to buy 350-401 Sample Online exam materials from our company, we can make sure that your benefits will far exceed the costs of you. The rate of return will be very obvious for you. We sincerely reassure all people on the 350-401 Sample Online test question from our company and enjoy the benefits that our study materials bring. We believe that our study materials will have the ability to help all people pass their 350-401 Sample Online exam and get the related exam in the near future.
Don't you feel a lot of pressure? No matter how high your qualifications, it does not mean your strength forever. Qualifications is just a stepping stone, and strength is the cornerstone which can secure your status.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
In fact, our PRINCE2 PRINCE2Foundation exam questions have helped tens of thousands of our customers successfully achieve their certification. Palo Alto Networks PCCSE - The curtain of life stage may be opened at any time, the key is that you are willing to show, or choose to avoid. SAP C-C4H620-34 - And you can free download the demo s to check it out. Salesforce Mobile-Solutions-Architecture-Designer - What's more important, you must choose the most effective exam materials that suit you. ASQ CMQ-OE - Details determine success or failure, so our every detail is strictly controlled.
Updated: May 28, 2022