350-401 Latest Braindumps questions & answers cover all the key points of the real test. With the 350-401 Latest Braindumps training pdf, you can get the knowledge you want in the actual test, so you do not need any other study material. If the 350-401 Latest Braindumps exam is coming and the time is tense, it is better to choose our 350-401 Latest Braindumps test engine dumps. And if you want to get all benefits like that, our 350-401 Latest Braindumps training quiz is your rudimentary steps to begin. So it is undisputed that you can be prepared to get striking outcomes if you choose our 350-401 Latest Braindumps study materials. The more time you spend in the preparation for 350-401 Latest Braindumps training materials, the higher possibility you will pass the exam.
CCNP Enterprise 350-401 Try it now!
CCNP Enterprise 350-401 Latest Braindumps - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Many people always are stopped by the difficult questions. If you want to get a comprehensive idea about our real Reliable Exam 350-401 Dumps Free study materials. It is convenient for you to download the free demo, all you need to do is just to find the “Download for free” item, and you will find there are three kinds of versions of Reliable Exam 350-401 Dumps Free learning guide for you to choose from namely, PDF Version Demo, PC Test Engine and Online Test Engine, you can choose to download any one version of our Reliable Exam 350-401 Dumps Free exam questions as you like.
The the probability of passing Cisco certification 350-401 Latest Braindumps exam is very small, but the reliability of Omgzlook can guarantee you to pass the examination of this probability. Our Omgzlook have a huge IT elite team. They will accurately and quickly provide you with Cisco certification 350-401 Latest Braindumps exam materials and timely update Cisco 350-401 Latest Braindumps exam certification exam practice questions and answers and binding.
Cisco 350-401 Latest Braindumps - It can help you to pass the exam successfully.
With 350-401 Latest Braindumps study engine, you will get rid of the dilemma that you work hard but cannot improve. With our 350-401 Latest Braindumps learning materials, you can spend less time but learn more knowledge than others. 350-401 Latest Braindumps exam questions will help you reach the peak of your career. Just think of that after you get the 350-401 Latest Braindumps certification, you will have a lot of opportunities of going to biger and better company and getting higher incomes! what a brighter future!
You can choose other products, but you have to know that Omgzlook can bring you infinite interests. Only Omgzlook can guarantee you 100% success.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
In order to facilitate the user's offline reading, the SAP C_ABAPD_2309 study braindumps can better use the time of debris to learn, especially to develop PDF mode for users. CompTIA PT0-002 - Select Omgzlook, it will ensure your success. We can proudly claim that you can successfully pass the exam just on the condition that you study with our Google ChromeOS-Administrator preparation materials for 20 to 30 hours. Cisco 200-301 - Omgzlook is website that can help a lot of IT people realize their dreams. Microsoft AZ-400 - If you do not own one or two kinds of skills, it is difficult for you to make ends meet in the modern society.
Updated: May 28, 2022