Cisco certification 350-401 Exam Questions Vce exam can give you a lot of change. Such as work, life would have greatly improve. Because, after all, 350-401 Exam Questions Vce is a very important certified exam of Cisco. Our 350-401 Exam Questions Vce learning materials are just staring points for exam candidates, and you may meet several challenging tasks or exams in the future about computer knowledge, we can still offer help. Need any help, please contact with us again! In order to pass Cisco certification 350-401 Exam Questions Vce exam disposably, you must have a good preparation and a complete knowledge structure.
CCNP Enterprise 350-401 It can help a lot of people achieve their dream.
To some extent, these 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Questions Vce certificates may determine your future. There a galaxy of talents in the 21st century, but professional IT talents not so many. Society need a large number of professional IT talents.
There are so many success examples by choosing our 350-401 Exam Questions Vce guide quiz, so we believe you can be one of them. Our 350-401 Exam Questions Vce exam questions will be the easiest access to success without accident for you. Besides, we are punctually meeting commitments to offer help on 350-401 Exam Questions Vce study materials.
More and more people choose Cisco Cisco 350-401 Exam Questions Vce exam.
If you require any further information about either our 350-401 Exam Questions Vce preparation exam or our corporation, please do not hesitate to let us know. High quality 350-401 Exam Questions Vce practice materials leave a good impression on the exam candidates and bring more business opportunities in the future. And many of our cutomers use our 350-401 Exam Questions Vce exam questions as their exam assistant and establish a long cooperation with us.
Our Cisco 350-401 Exam Questions Vce exam training materials contains questions and answers. Our experienced team of IT experts through their own knowledge and experience continue to explore the exam information.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
We assume all the responsibilities our Microsoft DP-203 simulating practice may bring you foreseeable outcomes and you will not regret for believing in us assuredly. Cisco 500-442 - Omgzlook is a professional IT certification sites, the certification success rate is 100%. Perhaps you haven't heard of our company's brand yet, although we are becoming a leader of CompTIA N10-009 exam questions in the industry. Cisco 500-490 - And our price is absolutely reasonable and suitable for each of the candidates who participating in the IT certification exams. And this version also helps establish the confidence of the candidates when they attend the HP HPE0-V28-KR exam after practicing.
Updated: May 28, 2022