350-401 Free Practice - Cisco Reliable Test Implementing Cisco Enterprise Network Core Technologies 350-401 Encor Simulator Free - Omgzlook

All kinds of exams are changing with dynamic society because the requirements are changing all the time. To keep up with the newest regulations of the 350-401 Free Practiceexam, our experts keep their eyes focusing on it. Our 350-401 Free Practice practice materials are updating according to the precise of the real exam. With the help of our 350-401 Free Practice exam questions, your review process will no longer be full of pressure and anxiety. With our 350-401 Free Practice study materials, only should you take about 20 - 30 hours to preparation can you attend the exam. When you send us a message, we will reply immediately and we will never waste your precious time on studying our 350-401 Free Practice practice quiz.

CCNP Enterprise 350-401 So that you can achieve a multiplier effect.

Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Free Practice guide question dumps are suitable for all age groups. Do not feel that you have no ability, and don't doubt yourself. When you choose to participate in the Cisco New 350-401 Test Dumps exam, it is necessary to pass it.

With the help of 350-401 Free Practice guide questions, you can conduct targeted review on the topics which to be tested before the exam, and then you no longer have to worry about the problems that you may encounter a question that you are not familiar with during the exam. With 350-401 Free Practice learning materials, you will not need to purchase any other review materials. Please be assured that with the help of 350-401 Free Practice learning materials, you will be able to successfully pass the exam.

Cisco 350-401 Free Practice - It is up to you to make a decision.

It is our responsibility to relieve your pressure from preparation of 350-401 Free Practice exam. To help you pass the 350-401 Free Practice exam is our goal. The close to 100% passing rate of our dumps allow you to be rest assured in our products. Not all vendors dare to promise that if you fail the exam, we will give you a full refund. But our IT elite of Omgzlook and our customers who are satisfied with our 350-401 Free Practice exam software give us the confidence to make such promise.

I have confidence in our Omgzlook products that soon Omgzlook's exam questions and answers about Cisco 350-401 Free Practice will be your choice and you will pass Cisco certification 350-401 Free Practice exam successfully. It is wise to choose our Omgzlook and Omgzlook will prove to be the most satisfied product you want.

350-401 PDF DEMO:

QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

If you worry about your exam, our SAP C-IEE2E-2404 exam training dumps will guide you and make you well preparing,you will pass exam without any doubt. Omgzlook is a website to provide a targeted training for Cisco certification Salesforce B2C-Commerce-Architect exam. We arrange the experts to check the update every day, if there is any update about the Salesforce ANC-201 pdf vce, the latest information will be added into the Salesforce ANC-201 exam dumps, and the useless questions will be remove of it to relief the stress for preparation. Huawei H13-334_V1.0 - If we have any updated version of test software, it will be immediately pushed to customers. Your knowledge range will be broadened and your personal skills will be enhanced by using the SAP C-TADM-23 free pdf torrent, then you will be brave and confident to face the SAP C-TADM-23 actual test.

Updated: May 28, 2022