350-401 Exam Questions - Cisco Implementing Cisco Enterprise Network Core Technologies 350-401 Encor Latest Test Tips - Omgzlook

If you have never bought our 350-401 Exam Questions exam materials on the website before, we understand you may encounter many problems such as payment or downloading 350-401 Exam Questions practice quiz and so on, contact with us, we will be there. Our employees are diligent to deal with your need and willing to do their part on the 350-401 Exam Questions study materials. And they are trained specially and professionlly to know every detail about our 350-401 Exam Questions learning prep. And the content of our 350-401 Exam Questions study questions is easy to understand. We have been always trying to make every effort to consolidate and keep a close relationship with customer by improving the quality of our 350-401 Exam Questions practice materials. High accuracy and high quality are the most important things we always looking for.

CCNP Enterprise 350-401 And we have become a popular brand in this field.

According to various predispositions of exam candidates, we made three versions of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Questions study materials for your reference: the PDF, Software and APP online. For many people, it’s no panic passing the 350-401 Reliable Exam Guide exam in a short time. Luckily enough,as a professional company in the field of 350-401 Reliable Exam Guide practice questions ,our products will revolutionize the issue.

We guarantee that you can pass the exam at one time even within one week based on practicing our 350-401 Exam Questions exam materials regularly. 98 to 100 percent of former exam candidates have achieved their success by the help of our 350-401 Exam Questions practice questions. And we have been treated as the best friend as our 350-401 Exam Questions training guide can really help and change the condition which our loyal customers are in and give them a better future.

Cisco 350-401 Exam Questions - So this certification exam is very popular now.

Everyone is not willing to fall behind, but very few people take the initiative to change their situation. Take time to make a change and you will surely do it. Our 350-401 Exam Questions actual test guide can give you some help. Our company aims to help ease the pressure on you to prepare for the exam and eventually get a certificate. Obtaining a certificate is equivalent to having a promising future and good professional development. Our 350-401 Exam Questions study materials have a good reputation in the international community and their quality is guaranteed. Why don't you there have a brave attempt? You will certainly benefit from your wise choice.

So that you will know the quality of the Omgzlook of Cisco 350-401 Exam Questions exam training materials. The Cisco 350-401 Exam Questions exam of Omgzlook is the best choice for you.

350-401 PDF DEMO:

QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

ISACA IT-Risk-Fundamentals study materials are here waiting for you! Salesforce Pardot-Specialist - Are you an IT staff? Are you enroll in the most popular IT certification exams? If you tell me "yes", then I will tell you a good news that you're in luck. Our company has established a long-term partnership with those who have purchased our Tableau TDA-C01 exam questions. Microsoft DP-900-KR - So the choice is important. Besides, the price of our VMware 2V0-32.24 learning guide is very favourable even the students can afford it.

Updated: May 28, 2022