These interactions have inspired us to do better. Now passing rate of them has reached up to 98 to 100 percent. By keeping minimizing weak points and maiming strong points, our 350-401 Exam Price exam materials are nearly perfect for you to choose. We are now in an era of technological development. 350-401 Exam Price had a deeper impact on our work. After you purchase our product you can download our 350-401 Exam Price study materials immediately.
CCNP Enterprise 350-401 We are committed to your success.
Based on the credibility in this industry, our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Price study braindumps have occupied a relatively larger market share and stable sources of customers. At present, Cisco Test 350-401 Experience exam is very popular. Do you want to get Cisco Test 350-401 Experience certificate? If it is ok, don't hesitate to sign up for the exam.
Our 350-401 Exam Price study braindumps are so popular in the market and among the candidates that is because that not only our 350-401 Exam Price learning guide has high quality, but also our 350-401 Exam Price practice quiz is priced reasonably, so we do not overcharge you at all. Meanwhile, our exam materials are demonstrably high effective to help you get the essence of the knowledge which was convoluted. As long as you study with our 350-401 Exam Price exam questions for 20 to 30 hours, you will pass the exam for sure.
Cisco 350-401 Exam Price - This is doubly true for IT field.
Due to the shortage of useful practice materials or being scanty for them, many candidates may choose the bad quality exam materials, but more and more candidates can choose our 350-401 Exam Price study materials. Actually, some practice materials are shooting the breeze about their effectiveness, but our 350-401 Exam Price training quiz are real high quality practice materials with passing rate up to 98 to 100 percent. And you will be amazed to find that our 350-401 Exam Price exam questions are exactly the same ones in the real exam.
Omgzlook pdf real questions and answers can prevent you from wasting lots of time and efforts on preparing for the exam and can help you sail through you exam with ease and high efficiency. But even you fail the exam, we assure we will give you FULL REFUND.
350-401 PDF DEMO:
QUESTION NO: 1
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
If you are curious or doubtful about the proficiency of our Fortinet FCSS_NST_SE-7.4 preparation quiz, we can explain the painstakingly word we did behind the light. There will be one version right for you and help you quickly pass the APMG-International Better-Business-Cases-Practitioner with ease, so that you can obtain the most authoritative international recognition on your IT ability. ISTQB ISTQB-CTFL - And we have confidence that your future aims will come along with this successful exam as the beginning. All that we have done is just to help you easily pass the Lpi 300-300 exam. In the past few years, IBM C1000-138 exam torrent hasreceived the trust of a large number of students and also helped a large number of students pass the exam smoothly.
Updated: May 28, 2022