We can promise that you would like to welcome this opportunity to kill two birds with one stone. If you choose our 350-401 Collection Free test questions as your study tool, you will be glad to study for your exam and develop self-discipline, our 350-401 Collection Free latest question adopt diversified teaching methods, and we can sure that you will have passion to learn by our products. We believe that our products will help you successfully pass your exam and hope you will like our product. We have three versions of our 350-401 Collection Free exam braindumps: the PDF, Software and APP online. You can decide which one you prefer, when you made your decision and we believe your flaws will be amended and bring you favorable results even create chances with exact and accurate content of our 350-401 Collection Free learning guide. Besides, many exam candidates are looking forward to the advent of new 350-401 Collection Free versions in the future.
CCNP Enterprise 350-401 Never stop challenging your limitations.
Over the years, 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Collection Free exam questions have helped tens of thousands of candidates successfully pass professional qualification exams, and help them reach the peak of their career. If you want to find a desirable job, you must rely on your ability to get the job. Now, our 350-401 Premium Files training materials will help you master the popular skills in the office.
But if the clients buy our 350-401 Collection Free training quiz they can immediately use our product and save their time. And the quality of our exam dumps are very high! The procedures of buying our 350-401 Collection Free study materials are simple and save the clients’ time.
Cisco 350-401 Collection Free - But this is still not enough.
When you decide to pass the 350-401 Collection Free exam and get relate certification, you must want to find a reliable exam tool to prepare for exam. That is the reason why I want to recommend our 350-401 Collection Free prep guide to you, because we believe this is what you have been looking for. Moreover we are committed to offer you with data protect act and guarantee you will not suffer from virus intrusion and information leakage after purchasing our 350-401 Collection Free guide torrent. The last but not least we have professional groups providing guidance in terms of download and installment remotely.
I think with this certification, all the problems will not be a problem. However, to pass this certification is a bit difficult.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Salesforce Salesforce-Loyalty-Management - You may try it! Huawei H20-421_V1.0 - Everyone has a utopian dream in own heart. ISACA CISM - The job-hunters face huge pressure because most jobs require both working abilities and profound major knowledge. This is the royal road to pass Fortinet FCP_FCT_AD-7.2 exam. However, our CyberArk CPC-SEN training materials can offer better condition than traditional practice materials and can be used effectively.
Updated: May 28, 2022