Thirdly, online version supports for any electronic equipment and also supports offline use at the same time. For the first time, you need to open 200-301 Exam Online exam questions in online environment, and then you can use it offline. All in all, helping our candidates to pass the exam successfully is what we always looking for. In the matter of quality, our 200-301 Exam Online practice engine is unsustainable with reasonable prices. Despite costs are constantly on the rise these years from all lines of industry, our 200-301 Exam Online learning materials remain low level. Success does not come only from the future, but it continues to accumulate from the moment you decide to do it.
CCNA 200-301 The reality is often cruel.
We are so proud to tell you that according to the statistics from our customers’ feedback, the pass rate among our customers who prepared for the exam with our 200-301 - Cisco Certified Network Associate Exam Exam Online test guide have reached as high as 99%, which definitely ranks the top among our peers. A good learning platform should not only have abundant learning resources, but the most intrinsic things are very important, and the most intuitive things to users are also indispensable. The 200-301 Study Tool test material is professional editorial team, each test product layout and content of proofreading are conducted by experienced professionals who have many years of rich teaching experiences, so by the editor of fine typesetting and strict check, the latest 200-301 Study Tool exam torrent is presented to each user's page is refreshing, but also ensures the accuracy of all kinds of learning materials is extremely high.
So we take this factor into consideration, develop the most efficient way for you to prepare for the 200-301 Exam Online exam, that is the real questions and answers practice mode, firstly, it simulates the real Cisco Certified Network Associate Exam test environment perfectly, which offers greatly help to our customers. Secondly, it includes printable PDF Format, also the instant access to download make sure you can study anywhere and anytime. All in all, high efficiency of 200-301 Exam Online exam material is the reason for your selection.
Cisco 200-301 Exam Online - You will never come across system crashes.
The content system of 200-301 Exam Online exam simulation is constructed by experts. After-sales service of our study materials is also provided by professionals. If you encounter some problems when using our 200-301 Exam Online study materials, you can also get them at any time. After you choose 200-301 Exam Online preparation questions, professional services will enable you to use it in the way that suits you best, truly making the best use of it, and bringing you the best learning results.
When the interface displays that you have successfully paid for our 200-301 Exam Online study materials, our specific online sales workers will soon deal with your orders. You will receive the 200-301 Exam Online study materials no later than ten minutes.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
As long as you study with our Juniper JN0-637 exam braindumps for 20 to 30 hours that we can claim that you will pass the exam for sure. WGU Cybersecurity-Architecture-and-Engineering - These professional knowledge will become a springboard for your career, help you get the favor of your boss, and make your career reach it is peak. How much time do you think it takes to pass an exam? Our SAP C_C4H630_34 learning materials can assure you that you only need to spend twenty to thirty hours to pass the exam. We can be sure that with the professional help of our Salesforce ANC-201 test guide you will surely get a very good experience. Cisco 350-401 - Some customers might worry that passing the exam is a time-consuming process.
Updated: May 28, 2022