The use of test preparation exam questions helps them to practice thoroughly. Rely on material of the free 200-301 Exam Study Guide braindumps online (easily available) sample tests, and resource material available on our website. These free web sources are significant for 200-301 Exam Study Guide certification syllabus. Quickly, the scores will display on the screen. The results are accurate. Moreover if you are not willing to continue our 200-301 Exam Study Guide test braindumps service, we would delete all your information instantly without doubt.
CCNA 200-301 The price is set reasonably.
CCNA 200-301 Exam Study Guide - Cisco Certified Network Associate Exam Time and tide wait for no man. However, how to pass Cisco certification New Exam 200-301 Collection Free exam quickly and simply? Our Omgzlook can always help you solve this problem quickly. In Omgzlook we provide the New Exam 200-301 Collection Free certification exam training tools to help you pass the exam successfully.
Our 200-301 Exam Study Guide practice materials are suitable to exam candidates of different levels. And after using our 200-301 Exam Study Guide learning prep, they all have marked change in personal capacity to deal with the 200-301 Exam Study Guide exam intellectually. The world is full of chicanery, but we are honest and professional in this area over ten years.
Cisco 200-301 Exam Study Guide - And your life will become better and better.
Our 200-301 Exam Study Guide practice dumps is high quality product revised by hundreds of experts according to the changes in the syllabus and the latest developments in theory and practice, it is focused and well-targeted, so that each student can complete the learning of important content in the shortest time. With 200-301 Exam Study Guide training prep, you only need to spend 20 to 30 hours of practice before you take the 200-301 Exam Study Guide exam.
There is plenty of skilled and motivated staff to help you obtain the Cisco Certified Network Associate Exam exam certificate that you are looking forward. We have faith in our professional team and our 200-301 Exam Study Guide study tool, and we also wish you trust us wholeheartedly.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
HP HPE7-A01 - Well, you have landed at the right place; Omgzlook offers your experts designed material which will gauge your understanding of various topics. Our Cisco 300-710 study materials have the high pass rate as 98% to 100%, hope you can use it fully and pass the exam smoothly. We have organized a group of professionals to revise SAP C-SIGDA-2403 preparation materials, according to the examination status and trend changes in the industry, tailor-made for the candidates. There is an irreplaceable trend that an increasingly amount of clients are picking up OMG OMG-OCUP2-FOUND100 study materials from tremendous practice materials in the market. CyberArk CPC-SEN - So just come and have a try!
Updated: May 28, 2022