We are never complacent about our achievements, so all content of our H31-161 Centres exam questions are strictly researched by proficient experts who absolutely in compliance with syllabus of this exam. Accompanied by tremendous and popular compliments around the world, to make your feel more comprehensible about the H31-161 Centres study prep, all necessary questions of knowledge concerned with the exam are included into our H31-161 Centres simulating exam. we can promise that our H31-161 Centres study materials will be the best study materials in the world with the high pass rate as 98% to 100%. All these achievements are due to the reason that our H31-161 Centres exam questions have a high quality that is unique in the market. You also don't need to spend expensive tuition to go to tutoring class.
HCIE-Carrier IP H31-161 Other workers are also dedicated to their jobs.
HCIE-Carrier IP H31-161 Centres - HCIE-Carrier IP (Written) Please add Omgzlook's training tool in your shopping cart now. Everything is changing so fast. So do not reject challenging new things.
These training products to help you pass the exam, we guarantee to refund the full purchase cost. Our website provide all the study materials and other training materials on the site and each one enjoy one year free update facilities. If these training products do not help you pass the exam, we guarantee to refund the full purchase cost.
Huawei H31-161 Centres - Mostly choice is greater than effort.
With the rapid development of the economy, the demands of society on us are getting higher and higher. If you can have H31-161 Centres certification, then you will be more competitive in society. Our study materials will help you get the according certification you want to have. Believe me, after using our study materials, you will improve your work efficiency. You will get more opportunities than others, and your dreams may really come true in the near future. H31-161 Centres test guide will make you more prominent in the labor market than others, and more opportunities will take the initiative to find you.
The content of our H31-161 Centres pass guide covers the most of questions in the actual test and all you need to do is review our H31-161 Centres vce dumps carefully before taking the exam. Then you can pass the actual test quickly and get certification easily.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D
QUESTION NO: 2
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 3
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 4
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 5
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
The Fortinet FCSS_NST_SE-7.4 study braindumps are compiled by our frofessional experts who have been in this career fo r over ten years. With the help of American College of Rheumatology RhMSUS study material, you will master the concepts and techniques that ensure you exam success. SAP C-C4H320-34 - Our customer service is 24 hours online and will answer your questions in the shortest possible time. Nutanix NCS-Core exam cram materials will try our best to satisfy your demand. CheckPoint 156-521 - As a responsible company, we don't ignore customers after the deal, but will keep an eye on your exam situation.
Updated: May 27, 2022