If you Omgzlook, Omgzlook can ensure you 100% pass Huawei certification H31-161 Questions exam. If you fail to pass the exam, Omgzlook will full refund to you. We are determined to give hand to the candidates who want to pass their H31-161 Questions exam smoothly and with ease by their first try. Our professional experts have compiled the most visual version of our H31-161 Questions practice materials: the PDF version, which owns the advantage of convenient to be printed on the paper. In order to pass Huawei certification H31-161 Questions exam some people spend a lot of valuable time and effort to prepare, but did not succeed.
HCIE-Carrier IP H31-161 A bad situation can show special integrity.
And we believe you will pass the H31-161 - HCIE-Carrier IP (Written) Questions exam just like the other people! Omgzlook Huawei Knowledge H31-161 Points exam training materials is the best choice to help you pass the exam. The training materials of Omgzlook website have a unique good quality on the internet.
So choosing our H31-161 Questions training materials is a wise choice. Our H31-161 Questionspractice materials will provide you with a platform of knowledge to help you achieve your dream. As you know, our v practice exam has a vast market and is well praised by customers.
Huawei H31-161 Questions - We provide one-year customer service; 4.
Perhaps you have wasted a lot of time to playing computer games. It doesn’t matter. It is never too late to change. There is no point in regretting for the past. Our H31-161 Questions exam questions can help you compensate for the mistakes you have made in the past. You will change a lot after learning our H31-161 Questions study materials. And most of all, you will get reward by our H31-161 Questions training engine in the least time with little effort.
If you are urgent to pass exam our exam materials will be suitable for you. Mostly you just need to remember the questions and answers of our Huawei H31-161 Questions exam review questions and you will clear exams.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 2
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 3
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 4
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D
QUESTION NO: 5
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
It is known to us that more and more companies start to pay high attention to the Microsoft MB-910 certification of the candidates. We offer you the most accurate IBM C1000-162 exam answers that will be your key to pass the certification exam in your first try. We have taken our customers’ suggestions of the SAP C-TS422-2023 exam prep seriously, and according to these useful suggestions, we have tried our best to perfect the SAP C-TS422-2023 reference guide from our company just in order to meet the need of these customers well. The Huawei H12-811-ENU test answers are tested and approved by our certified experts and you can check the accuracy of our questions from our free demo. Usually, the questions of the real exam are almost the same with our Adobe AD0-E716 exam questions.
Updated: May 27, 2022