They also doubted it at the beginning, but the high pass rate of us allow them beat the 350-401 Updates at their first attempt. What most important is that your money and exam attempt is bound to award you a sure and definite success with 100% money back guarantee. You can claim for the refund of money if you do not succeed to pass the 350-401 Updates exam and achieve your target. Our test-orientated high-quality 350-401 Updates exam questions would be the best choice for you, we sincerely hope all of our candidates can pass 350-401 Updates exam, and enjoy the tremendous benefits of our 350-401 Updates prep guide. Helping candidates to pass the 350-401 Updates exam has always been a virtue in our company’s culture, and you can connect with us through email at the process of purchasing and using, we would reply you as fast as we can. At the same time, our proffesional experts are keeping a close eye on the changes of the exam questions and answers.
Now Cisco 350-401 Updates certification test is very popular.
No matter in the day or on the night, you can consult us the relevant information about our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Updates preparation exam through the way of chatting online or sending emails. So our IT technicians of Omgzlook take more efforts to study Latest Exam 350-401 Questions Answers exam materials. All exam software from Omgzlook is the achievements of more IT elite.
The clients abroad only need to fill in correct mails and then they get our products conveniently. Our {350-401 Updates cram training materials provide the version with the language domestically and the version with the foreign countries’ language so that the clients at home and abroad can use our 350-401 Updates study tool conveniently. The clients at home and abroad can both purchase our 350-401 Updates study tool online.
Cisco 350-401 Updates - So, act now!
In today’s society, many enterprises require their employees to have a professional 350-401 Updates certification. It is true that related skills serve as common tools frequently used all over the world, so we can realize that how important an 350-401 Updates certification is, also understand the importance of having a good knowledge of it. Passing the 350-401 Updates exam means you might get the chance of higher salary, greater social state and satisfying promotion chance. Once your professional 350-401 Updates ability is acknowledged by authority, you master the rapidly developing information technology. With so many advantages, why don’t you choose our reliable 350-401 Updates actual exam guide, for broader future and better life?
We know the certificate of 350-401 Updates exam guide is useful and your prospective employer wants to see that you can do the job with strong prove, so our 350-401 Updates study materials could be your opportunity. Our 350-401 Updates practice dumps are sensational from the time they are published for the importance of 350-401 Updates exam as well as the efficiency of our 350-401 Updates training engine.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
In order to live a better live, people improve themselves by furthering their study, as well as increase their professional VMware 2V0-32.24 skills. By practicing our VMware 6V0-31.24 exam braindumps, you will get the most coveted certificate smoothly. We assume all the responsibilities that our Microsoft MB-310 practice braindumps may bring. Therefore, no matter what kind of life you live, no matter how much knowledge you have attained already, it should be a great wonderful idea to choose our CompTIA SY0-601-KR guide torrent for sailing through the difficult test. Our Amazon DOP-C02 study guide will be the best choice for your time, money and efforts.
Updated: May 28, 2022