Many people may have different ways and focus of study to pass 350-401 Vce Exam Simulator exam in the different time intervals, but we will find that in real life, can take quite a long time to learn 350-401 Vce Exam Simulator learning questions to be extremely difficult. You may be taken up with all kind of affairs, and sometimes you have to put down something and deal with the other matters for the latter is more urgent and need to be done immediately. With the help of our 350-401 Vce Exam Simulator training guide, your dream won’t be delayed anymore. Because our study materials have the enough ability to help you improve yourself and make you more excellent than other people. The 350-401 Vce Exam Simulator learning dumps from our company have helped a lot of people get the certification and achieve their dreams. We are always thinking about the purpose for our customers.
CCNP Enterprise 350-401 Our research materials have many advantages.
Through all these years' experience, our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Vce Exam Simulator training materials are becoming more and more prefect. You really can't find a more cost-effective product than 350-401 Latest Test Test learning quiz! Our company wants more people to be able to use our products.
All exams from different suppliers will be easy to handle. Actually, this 350-401 Vce Exam Simulator exam is not only practical for working or studying conditions, but a manifest and prestigious show of your personal ability. Passing the 350-401 Vce Exam Simulator exam has never been so efficient or easy when getting help from our 350-401 Vce Exam Simulator training materials.
Cisco 350-401 Vce Exam Simulator - The next thing you have to do is stick with it.
With the high employment pressure, more and more people want to ease the employment tension and get a better job. The best way for them to solve the problem is to get the 350-401 Vce Exam Simulator certification. Because the certification is the main symbol of their working ability, if they can own the 350-401 Vce Exam Simulator certification, they will gain a competitive advantage when they are looking for a job. An increasing number of people have become aware of that it is very important for us to gain the 350-401 Vce Exam Simulator exam questions in a short time. Because all of them have realized that it is indispensable to our daily life and work.
For the complex part of our 350-401 Vce Exam Simulator exam question, you may be too cumbersome, but our system has explained and analyzed this according to the actual situation to eliminate your doubts and make you learn better. If you choose our 350-401 Vce Exam Simulator exam question for related learning and training, the system will automatically record your actions and analyze your learning effects.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
And the Software version of our Tableau TDA-C01 study materials have the advantage of simulating the real exam, so that the candidates have more experience of the practicing the real exam questions. Our Salesforce Interaction-Studio-Accredited-Professional actual questions are updated in a high speed. SAP C-TS4CO-2023 - Don't doubt about it. Scaled Agile SAFe-APM - Hence one can see that the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) learn tool compiled by our company are definitely the best choice for you. ServiceNow CIS-FSM - A good learning platform should not only have abundant learning resources, but the most intrinsic things are very important, and the most intuitive things to users are also indispensable.
Updated: May 28, 2022