We have considerate services as long as you need us. Do not underestimate your ability, we will be your strongest backup while you are trying with our 350-401 Files real exam. Besides, to fail while trying hard is no dishonor. We will try our best to help you pass 350-401 Files exam successfully. Although it is difficult for you to prepare for 350-401 Files exam, once you obtain the targeted exam certification, you will have a vast development prospects in IT industry. It is quite convenient to study with our 350-401 Files study materials.
It is possible for you to easily pass 350-401 Files exam.
Get our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Files certification actual exam and just make sure that you fully understand it and study every single question in it by heart. There are more and more people to participate in 350-401 Pass-Guaranteed Dumps certification exam, and how to win in the increasingly competitive situation? To chose the right hand is the key. Our Omgzlook team has studies the 350-401 Pass-Guaranteed Dumps certification exam for years so that we have in-depth knowledge of the test.
It is known to us that to pass the 350-401 Files exam is very important for many people, especially who are looking for a good job and wants to have a 350-401 Files certification. Because if you can get a certification, it will be help you a lot, for instance, it will help you get a more job and a better title in your company than before, and the 350-401 Files certification will help you get a higher salary. We believe that our company has the ability to help you successfully pass your exam and get a 350-401 Files certification by our 350-401 Files exam torrent.
Cisco 350-401 Files - At first, it can be only used on PC.
Different from other similar education platforms, the 350-401 Files quiz guide will allocate materials for multi-plate distribution, rather than random accumulation without classification. How users improve their learning efficiency is greatly influenced by the scientific and rational design and layout of the learning platform. The Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) prepare torrent is absorbed in the advantages of the traditional learning platform and realize their shortcomings, so as to develop the 350-401 Files test material more suitable for users of various cultural levels. If just only one or two plates, the user will inevitably be tired in the process of learning on the memory and visual fatigue, and the 350-401 Files test material provided many study parts of the plates is good enough to arouse the enthusiasm of the user, allow the user to keep attention of highly concentrated.
Our 350-401 Files free dumps demo will provide you some basic information for the accuracy of our exam materials. All questions and answers in our 350-401 Files real dumps are tested by our certified trainers with rich experience and one or two days is enough for you practicing valid 350-401 Files exam pdf.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
We will send our ISTQB CTAL-TTA exam guide within 10 minutes after your payment. There are three versions according to your study habit and you can practice our SAP C-THR87-2405 dumps pdf with our test engine that help you get used to the atmosphere of the formal test. Since the SAP C-S4CPR-2408 study quiz is designed by our professionals who had been studying the exam all the time according to the changes of questions and answers. Hitachi HQT-4230 - With the quick development of the eletronic products, more and more eletronic devices are designed to apply to our life. What's more, the latest version of our EMC D-SNC-DY-00 study materials will be a good way for you to broaden your horizons as well as improve your skills.
Updated: May 28, 2022