Our 350-401 Assessment real exam is written by hundreds of experts, and you can rest assured that the contents of the 350-401 Assessment study materials are contained. After obtaining a large amount of first-hand information, our experts will continue to analyze and summarize and write the most comprehensive 350-401 Assessment learning questions possible. And at the same time, we always keep our questions and answers to the most accurate and the latest. If you are really not sure which version you like best, you can also apply for multiple trial versions of our 350-401 Assessment exam questions. We want our customers to make sensible decisions and stick to them. You can see that so many people are already ahead of you!
CCNP Enterprise 350-401 And you can choose the favorite one.
According to the data that are proved and tested by our loyal customers, the pass rate of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Assessment exam questions is high as 98% to 100%. Many exam candidates are uninformed about the fact that our 350-401 Exam Pattern preparation materials can help them with higher chance of getting success than others. It is all about efficiency and accuracy.
With the improvement of people’s living standards, there are more and more highly educated people. To defeat other people in the more and more fierce competition, one must demonstrate his extraordinary strength. Today, getting 350-401 Assessment certification has become a trend, and 350-401 Assessment exam dump is the best weapon to help you pass certification.
Cisco 350-401 Assessment - What is more, we offer customer services 24/7.
Obtaining the 350-401 Assessment certification is not an easy task. Only a few people can pass it successfully. If you want to be one of them, please allow me to recommend the 350-401 Assessment learning questions from our company to you, the superb quality of 350-401 Assessment exam braindumps we've developed for has successfully helped thousands of candidates to realize their dreams. And our 350-401 Assessment study materials have helped so many customers pass the exam.
As a key to the success of your life, the benefits that 350-401 Assessment exam guide can bring you are not measured by money. 350-401 Assessment exam guide can not only help you pass the exam, but also help you master a new set of learning methods and teach you how to study efficiently, 350-401 Assessment exam material will lead you to success.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
If you want to pass your exam and get the EXIN PR2F certification which is crucial for you successfully, I highly recommend that you should choose the EXIN PR2F study materials from our company so that you can get a good understanding of the exam that you are going to prepare for. There are also free demos of our Fortinet FCSS_NST_SE-7.4 study materials on the website that you can download before placing the orders. SAP C_TS422_2023 - Details determine success or failure, so our every detail is strictly controlled. Salesforce Salesforce-MuleSoft-Developer-II - If you believe in our products this time, you will enjoy the happiness of success all your life Salesforce Data-Cloud-Consultant - So we have tried our best to develop the three packages for you to choose.
Updated: May 28, 2022