Besides, the pollster conducted surveys of public opinions of our 70-410 Practice Mock study engine and get desirable outcomes that more than 98 percent of exam candidates feel rewarding after using our 70-410 Practice Mock actual exam. And we enjoy their warm feedbacks to show and prove that we really did a good job in this career. You can totally rely on us! 70-410 Practice Mock study engine is very attentive to provide a demo for all customers who concerned about our products, whose purpose is to allow customers to understand our product content before purchase. Many students suspect that if 70-410 Practice Mock learning material is really so magical? Does it really take only 20-30 hours to pass such a difficult certification exam successfully? It is no exaggeration to say that you will be able to successfully pass the exam with our 70-410 Practice Mock exam questions. The download and install set no limits for the amount of the computers and the persons who use 70-410 Practice Mock test prep.
Windows Server 2012 70-410 However, you must believe that this is true!
And we will give you 100% success guaranteed on the 70-410 - Installing and Configuring Windows Server 2012 Practice Mock training guide. In short, you will find the convenience and practicality of our Exam 70-410 Assessment quiz guide in the process of learning. We will also continue to innovate and improve functions to provide you with better services.
We are convinced that our 70-410 Practice Mock exam questions can help you gain the desired social status and thus embrace success. The competition in today's society is the competition of talents. Can you survive and be invincible in a highly competitive society? Can you gain a foothold in such a complex society? If your answer is "no", that is because your ability is not strong enough.
Our Microsoft 70-410 Practice Mock exam questions are your best choice.
According to the survey, the average pass rate of our candidates has reached 99%. High passing rate must be the key factor for choosing, which is also one of the advantages of our 70-410 Practice Mock real study dumps. Our 70-410 Practice Mock exam questions have been widely acclaimed among our customers, and the good reputation in industry prove that choosing our study materials would be the best way for you, and help you gain the 70-410 Practice Mock certification successfully. With about ten years’ research and development we still keep updating our 70-410 Practice Mock prep guide, in order to grasp knowledge points in accordance with the exam, thus your study process would targeted and efficient.
Our 70-410 Practice Mock learning questions engage our working staff in understanding customers’ diverse and evolving expectations and incorporate that understanding into our strategies, thus you can 100% trust our 70-410 Practice Mock exam engine. And our professional 70-410 Practice Mock study materials determine the high pass rate.
70-410 PDF DEMO:
QUESTION NO: 1
You have three servers named Server1, Server2, and DC1 that run Windows Server 2012 R2.
IPv6 addresses and configurations are assigned to all of the servers by using DHCPv6.
The IPv6 routing on Server1 is shown in the following table.
You verify that Server2 can ping the IPv6 address of DC1.
You need to ensure that Server1 can ping the IPv6 address of DC1.
What command should you run on Server1? (To answer, select the appropriate options in the answer area.)
Answer:
Explanation
Before a routing table is used, the destination cache is checked for an entry matching the destination address in the packet being forwarded. If the destination cache does not contain an entry for the destination address, the routing table is used to determine:
The next-hop address - For a direct delivery (in which the destination is on a local link), the next-hop address is the destination address in the packet. For an indirect delivery (in which the destination is not on a local link), the next-hop address is the address of a router.
The next-hop interface - The interface identifies the physical or logical interface that is used to forward the packet either to its destination or to the next router.
Reference: http://technet.microsoft.com/en-us/library/dd379520%28v=WS.10%29.aspx
QUESTION NO: 2
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. Computer Management
B. Server Manager
C. Share and Storage Management
D. New-VirtualDisk
Answer: A
Explanation
For other questions to create a VHD (file) you can use computer management.
- Share and storage management (2008 only)
- New-storagesubsystemVirtualDisk (this is a virtual disk, NOT a virtual hard disk)
- Server Manager (you would use this to create virtual disks, not virtual hard disks)
QUESTION NO: 3
In an isolated test environment, you deploy a server named Server1 that runs a Server Core
Installation of Windows Server 2012 R2. The test environment does not have Active Directory
Domain Services (AD DS) installed.
You install the Active Directory Domain Services server role on Server1.
You need to configure Server1 as a domain controller.
Which cmdlet should you run?
A. Install-ADDSDomainController
B. Install-ADDSDomain
C. Install-ADDSForest
D. Install-WindowsFeature
Answer: C
Explanation
Install-ADDSDomainController - Installs a domain controller in Active Directory.
Install-ADDSDomain - Installs a new Active Directory domain configuration.
Install-ADDSForest - Installs a new Active Directory forest configuration.
Install-WindowsFeature - Installs one or more Windows Server roles, role services, or features on either the local or a specified remote server that is running Windows Server 2012 R2. This cmdlet is equivalent to and replaces Add-WindowsFeature, the cmdlet that was used to install roles, role services, and features.
C:\PS>Install-ADDSForest -DomainName corp.contoso.com -CreateDNSDelegation DomainMode
Win2008 - ForestMode Win 2008 R2 -DatabasePath "d:\NTDS" -SysvolPath "d:\SYSVOL" -LogPath
"e:\Logs"Installs a new forest named corp.contoso.com, creates a DNS delegation in the contoso.com domain, sets domain functional level to Windows Server 2008 R2 and sets forest functional level to
Windows Server 2008,installs the Active Directory database and SYSVOL on the D:\ drive, installs the log files on the E:\ drive and has the server automatically restart after AD DS installation is complete and prompts the user to provide and confirm the Directory Services Restore Mode (DSRM) password.
QUESTION NO: 4
Your network contains an Active Directory domain named contoso.com. The domain contains
100 servers.
The servers are contained in an organizational unit (OU) named Servers OU.
You need to create a group named Group1 on all of the servers in the domain. You must ensure that
Group1 is added only to the servers.
What should you configure?
A. a Local Users and Groups preferences setting in a Group Policy linked to the Domain Controllers
OU
B. a Restricted Groups setting in a Group Policy linked to the domain
C. a Local Users and Groups preferences setting in a Group Policy linked to ServersOU
D. a Restricted Groups setting in a Group Policy linked to Servers OU
Answer: C
Explanation
A. This would add the group to the wrong OU
B. This would affect the whole domain and would effect member of the group
C. allows you to centrally manage local users and groups on domain member computers and is this is the correct OU for the GPO change
D. Restricted Groups defines what member or groups should exist as part of a group Why use Group
Policy preferences?
Unlike Group Policy settings, which App1y to both local computer policy and Active Directory policy,
Group Policy preferences only App1y to Active Directory policy.
You use preferences to configure many areas of the OS, including:
System devices, such as USB ports, floppy drives and removable media Network shares and mapping network shares to drive letters System and user environment variables User and group accounts for the local computer VPN and dial-up networking connections Printer configuration and mapping
Registry settings, schedule tasks and system services Settings for Folder Options, Internet Options and Regional and Language Options Settings for power schemes and power management Start Menu properties and menu items
QUESTION NO: 5
Your network contains an Active Directory domain named contoso.com. The domain contains
500 servers that run Windows Server 2012 R2.
You have a written security policy that states the following:
* Only required ports must be open on the servers.
* All of the servers must have Windows Firewall enabled.
* Client computers used by administrators must be allowed to access all of the ports on all of the servers.
* Client computers used by the administrators must be authenticated before the client computers can access the servers.
You have a client computer named Computer1 that runs Windows 8.
You need to ensure that you can use Computer1 to access all of the ports on all of the servers successfully. The solution must adhere to the security policy.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. On Computer1, create a connection security rule.
B. On all of the servers, create an outbound rule and select the Allow the connection if it is secure option.
C. On all of the servers, create an inbound rule and select the Allow the connection if it is secure option.
D. On Computer1, create an inbound rule and select the Allow the connection if it is secure option.
E. On Computer1, create an outbound rule and select the Allow the connection if it is secure option.
F. On all of the servers, create a connection security rule.
Answer: A C F
Explanation
Unlike firewall rules, which operate unilaterally, connection security rules require that both communicating computers have a policy with connection security rules or another compatible IPsec policy.
Traffic that matches a firewall rule that uses the Allow connection if it is secure setting bypasses
Windows Firewall. The rule can filter the traffic by IP address, port, or protocol. This method is supported on Windows Vista or Windows Server 2008.
References:
http://technet.microsoft.com/en-us/library/cc772017.aspx
http://technet.microsoft.com/en-us/library/cc753463.aspx
Being subjected to harsh tests of market, our ASQ CQE-KR exam questions are highly the manifestation of responsibility carrying out the tenets of customer oriented. According to the research statistics, we can confidently tell that 99% candidates have passed the Fortinet NSE5_FMG-7.2 exam. If you are unfamiliar with our IBM C1000-101-KR practice materials, please download the free demos for your reference, and to some unlearned exam candidates, you can master necessities by our IBM C1000-101-KR training prep quickly. But our Amazon SOA-C02-KR exam questions have made it. If the user finds anything unclear in the SAP C_SIGPM_2403 exam questions exam, we will send email to fix it, and our team will answer all of your questions related to the SAP C_SIGPM_2403 actual exam.
Updated: May 28, 2022