If you fail in the exam with our 70-410 Test Questions quiz prep we will refund you in full at one time immediately. If only you provide the proof which include the exam proof and the scanning copy or the screenshot of the failure marks we will refund you immediately. If any problems or doubts about our 70-410 Test Questions exam torrent exist, please contact our customer service personnel online or contact us by mails and we will reply you and solve your doubts immediately. Though at first a lot of our new customers didn't believe our 70-410 Test Questions exam questions, but they have became the supporters now. Our 70-410 Test Questions study guide stand the test of time and harsh market, convey their sense of proficiency with passing rate up to 98 to 100 percent. It’s our responsibility to offer instant help to every user on our 70-410 Test Questions exam questions.
Windows Server 2012 70-410 And we give some discounts on special festivals.
Windows Server 2012 70-410 Test Questions - Installing and Configuring Windows Server 2012 On the cutting edge of this line for over ten years, we are trustworthy company you can really count on. Learning knowledge is just like building a house, our Latest 70-410 Exam Test training materials serve as making the solid foundation from the start with higher efficiency. Even if this is just the first time you are preparing for the exam, you can expect high grade.
You can just look at the hot hit on our website on the 70-410 Test Questions practice engine, and you will be surprised to find it is very popular and so many warm feedbacks are written by our loyal customers as well. Our 70-410 Test Questions study prep does not need any ads, their quality has propaganda effect themselves. As a result, the pass rate of our 70-410 Test Questions exam braindumps is high as 98% to 100%.
Microsoft 70-410 Test Questions - You can directly print it on papers.
Our company has authoritative experts and experienced team in related industry. To give the customer the best service, all of our company's 70-410 Test Questions learning materials are designed by experienced experts from various field, so our 70-410 Test Questions Learning materials will help to better absorb the test sites. One of the great advantages of buying our product is that can help you master the core knowledge in the shortest time. At the same time, our 70-410 Test Questions learning materials discard the most traditional rote memorization methods and impart the key points of the qualifying exam in a way that best suits the user's learning interests, this is the highest level of experience that our most authoritative think tank brings to our 70-410 Test Questions learning materials users. Believe that there is such a powerful expert help, our users will be able to successfully pass the qualification test to obtain the qualification certificate.
If you use our study materials, you must walk in front of the reference staff that does not use valid 70-410 Test Questions real exam. And you will get the according 70-410 Test Questions certification more smoothly.
70-410 PDF DEMO:
QUESTION NO: 1
Your network contains a file server named Server1 that runs Windows Server 2012 R2. All client computers run Windows 8. Server1 contains a folder named Folder1. Folder1 contains the installation files for the company's desktop applications. A network technician shares Folder1 as
Share 1.
You need to ensure that the share for Folder1 is not visible when users browse the network.
What should you do?
A. From the properties of Folder1, deny the List Folder Contents permission for the Everyone group.
B. From the properties of Folder1, remove Share1, and then share Folder1 as Share1$.
C. From the properties of Folder1, configure the hidden attribute.
D. From the properties of Share1, configure access-based enumeration
Answer: B
QUESTION NO: 2
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the
Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention.
The solution must prevent data loss.
Which settings should you modify?
A. BIOS
B. Automatic Start Action
C. Automatic Stop Action
D. Integration Services
Answer: C
Explanation
The Automatic Stop Action setting should be modified because it will allow you to configure:
"Save the virtual machine state" option instructs Hyper-V Virtual Machine Management Service to save the virtual machine state on the local disk when the Hyper-V Server shuts down.
OR "Turn Off the virtual machine" is used by the Hyper-V Management Service (VMMS.exe) to gracefully turn off the virtual machine.
OR "Shut down the guest operating system" is successful only if the "Hyper-V Shutdown" guest service is running in the virtual machine. The guest service is required to be running in the virtual machine as the Hyper-V VMMS.EXE process will trigger Windows Exit message which is received by the service. Once the message is received by the guest service, it takes the necessary actions to shut down the virtual machine.
Reference: http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/
QUESTION NO: 3
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: K
Explanation
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh831410.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V,
Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and
Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335
QUESTION NO: 4
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts several virtual machines. Each virtual machine has two network adapters. Server1 contains several virtual switches.
On Server1, you create a NIC team that has two network adapters.
You discover that the NIC team is set to Static Teaming mode.
You need to modify the NIC teaming mode to Switch Independent.
Which cmdlet should you use?
A. Set-VMNetworkAdapter
B. Set-NetLbfoTeam
C. Set-NetLbfoTeamNic
D. Set-VMSwitch
Answer: B
Explanation
The Set-NetLbfoTeam cmdlet sets the TeamingMode or LoadBalancingAlgorithm parameters on the specified NIC team.
Example: Set the teaming mode
This command sets the teaming mode of the team named Team1 to LACP.
Windows PowerShell
PS C:\> Set-NetLbfoTeam -Name Team1 -TeamingMode LACP
Reference: Set-NetLbfoTeam
https://technet.microsoft.com/en-us/library/jj130844(v=wps.630).aspx
QUESTION NO: 5
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.
Contoso.com has a Windows Server 2012 R2 domain controller, named ENSUREPASS-DC01, which has the Domain Naming master and the Schema master roles installed. Contoso.com also has a
Windows Server 2008 R2 domain controller, named ENSUREPASS-DC02, which has the PDC Emulator,
RID master, and Infrastructure master roles installed.
You have deployed a new Windows Server 2012 server, which belongs to a workgroup, in
Contoso.com's perimeter network.
You then executed the djoin.exe command.
Which of the following is the purpose of the djoin.exe command?
A. It sets up a computer account in a domain and requests an offline domain join when a computer restarts.
B. It sets up a user account in a domain and requests an online domain join when a computer restarts.
C. It sets up a computer account in a domain and requests an offline domain join immediately.
D. It sets up a computer account in a domain and requests an online domain join immediately.
Answer: A
So, they are reliably rewarding Symantec 250-586 practice materials with high utility value. If you are on the bus, you can choose the APP version of Cisco 300-635 training engine. CIW 1D0-623 - Actually, we never stop researching the new functions of the study materials. ASQ CQE-KR - After the new version appears, we will also notify the user at the first time. Salesforce B2C-Commerce-Architect - Our Omgzlook IT experts are very experienced and their study materials are very close to the actual exam questions, almost the same.
Updated: May 28, 2022