Amazon인증 AWS-DevOps-Engineer-Professional질문과 답시험을 패스하는 방법은 많고도 많습니다. Omgzlook의Amazon인증 AWS-DevOps-Engineer-Professional질문과 답덤프로 시험에 다시 도전해보세요. Omgzlook의Amazon인증 AWS-DevOps-Engineer-Professional질문과 답덤프는 착한 가격에 100%에 달하는 적중율과 패스율을 보장해드립니다. 국제공인자격증을 취득하여 IT업계에서 자신만의 자리를 잡고 싶으신가요? 자격증이 수없이 많은데Amazon AWS-DevOps-Engineer-Professional질문과 답 시험패스부터 시작해보실가요? 100%합격가능한 Amazon AWS-DevOps-Engineer-Professional질문과 답덤프는Amazon AWS-DevOps-Engineer-Professional질문과 답시험문제의 기출문제와 예상문제로 되어있는 퍼펙트한 모음문제집으로서 시험패스율이 100%에 가깝습니다. Omgzlook제품을 선택함으로 여러분은 시간도 절약하고 돈도 절약하는 일석이조의 득을 얻을수 있습니다.
AWS Certified DevOps Engineer AWS-DevOps-Engineer-Professional 우리의 문제집으로 여러분은 충분히 안전이 시험을 패스하실 수 있습니다.
Amazon AWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional (DOP-C01)질문과 답덤프의 문제와 답은 모두 엘리트한 인증강사 및 전문가들에 의하여 만들어져Amazon AWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional (DOP-C01)질문과 답 시험응시용만이 아닌 학습자료용으로도 손색이 없는 덤프입니다.저희 착한Amazon AWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional (DOP-C01)질문과 답덤프 데려가세용~! Omgzlook는 아주 믿을만하고 서비스 또한 만족스러운 사이트입니다. 만약 시험실패 시 우리는 100% 덤프비용 전액환불 해드립니다.그리고 시험을 패스하여도 우리는 일 년 동안 무료업뎃을 제공합니다.
관심있는 인증시험과목Amazon AWS-DevOps-Engineer-Professional질문과 답덤프의 무료샘플을 원하신다면 덤프구매사이트의 PDF Version Demo 버튼을 클릭하고 메일주소를 입력하시면 바로 다운받아Amazon AWS-DevOps-Engineer-Professional질문과 답덤프의 일부분 문제를 체험해 보실수 있습니다. PDF버전외에 온라인버전과 테스트엔버전 Demo도 다운받아 보실수 있습니다.
Amazon AWS-DevOps-Engineer-Professional질문과 답 - 하지만 여러분의 선택에 따라 보장도 또한 틀립니다.
인터넷에는Amazon인증 AWS-DevOps-Engineer-Professional질문과 답시험대비공부자료가 헤아릴수 없을 정도로 많습니다.이렇게 많은Amazon인증 AWS-DevOps-Engineer-Professional질문과 답공부자료중 대부분 분들께서 저희Omgzlook를 선택하는 이유는 덤프 업데이트가 다른 사이트보다 빠르다는 것이 제일 큰 이유가 아닐가 싶습니다. Omgzlook의 Amazon인증 AWS-DevOps-Engineer-Professional질문과 답덤프를 구매하시면 덤프가 업데이트되면 무료로 업데이트된 버전을 제공받을수 있습니다.
그리고 Omgzlook에서는 무료로 24시간 온라인상담이 있습니다. 여러분은 우리.
AWS-DevOps-Engineer-Professional PDF DEMO:
QUESTION NO: 1
An Application team is refactoring one of its internal tools to run in AWS instead of on- premises hardware.
All of the code is currently written in Python and is standalone. There is also no external state store or relational database to be queried.
Which deployment pipeline incurs the LEAST amount of changes between development and production?
A. Developers should use their native Python environment. When Dependencies are changed and a new container is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use AWS CloudFormation with the custom container to deploy the new Amazon ECS.
B. Developers should use Docker for local development. Use AWS SMS to import these containers as
AMIs for Amazon EC2 whenever dependencies are updated. Use AWS CodePipeline to test new code changes against the Auto Scaling group.
C. Developers should use their native Python environment. When Dependencies are changed and a new code is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use CodePipeline and CodeBuild with the custom container to test new code changes inside AWS Elastic Beanstalk
Answer: B
QUESTION NO: 2
A company has an application that has predictable peak traffic times. The company wants the application instances to scale up only during the peak times. The application stores state in Amazon
DynamoDB. The application environment uses a standard Node.js application stack and custom Chef recipes stored in a private Git repository.
Which solution is MOST cost-effective and requires the LEAST amount of management overhead when performing rolling updates of the application environment?
A. Configure AWS OpsWorks stacks and push the custom recipes to an Amazon S3 bucket and configure custom recipes to point to the S3 bucket. Then add an application layer type for a standard
Node.js application server and configure the custom recipe to deploy the application in the deploy step from the S3 bucket. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB
B. Create a custom AMI with the Node.js environment and application stack using Chef recipes. Use the AMI in an Auto Scaling group and set up scheduled scaling for the required times, then set up an
Amazon EC2 IAM role that provides permission to access DynamoDB.
C. Create a Docker file that uses the Chef recipes for the application environment based on an official
Node.js Docker image. Create an Amazon ECS cluster and a service for the application environment, then create a task based on this Docker image. Use scheduled scaling to scale the containers at the appropriate times and attach a task-level IAM role that provides permission to access DynamoD
D. Configure AWS OpsWorks stacks and use custom Chef cookbooks. Add the Git repository information where the custom recipes are stored, and add a layer in OpsWorks for the Node.js application server.
Then configure the custom recipe to deploy the application in the deploy step. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB.
Answer: A
QUESTION NO: 3
A company is migrating an application to AWS that runs on a single Amazon EC2 instance.
Because of licensing limitations, the application does not support horizontal scaling. The application will be using Amazon Aurora for its database.
How can the DevOps Engineer architect automated healing to automatically recover from EC2 and
Aurora failures, in addition to recovering across Availability Zones (AZs), in the MOST cost-effective manner?
A. Create an EC2 instance and enable instance recovery. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance if the primary database instance fails.
B. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to start a new EC2 instance in an available AZ when the instance status reaches a failure state. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance when the primary database instance fails.
C. Create an EC2 Auto Scaling group with a minimum and maximum instance count of 1, and have it span across AZs. Use a single-node Aurora instance.
D. Assign an Elastic IP address on the instance. Create a second EC2 instance in a second AZ. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to move the Elastic IP address to the second instance when the first instance fails. Use a single-node Aurora instance.
Answer: B
QUESTION NO: 4
A Security team is concerned that a Developer can unintentionally attach an Elastic IP address to an Amazon EC2 instance in production. No Developer should be allowed to attach an Elastic IP address to an instance.
The Security team must be notified if any production server has an Elastic IP address at any time.
How can this task be automated?
A. Ensure that all IAM groups are associated with Developers do not have associate-address permissions.
Create a scheduled AWS Lambda function to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team if an instance has an Elastic IP address associated with it.
B. Create an AWS Config rule to check that all production instances have the EC2 IAM roles that include deny associate-address permissions. Verify whether there is an Elastic IP address associated with any instance, and alert the Security team if an instance has an Elastic IP address associated with it.
C. Use Amazon Athena to query AWS CloudTrail logs to check for any associate-address attempts.
Create an AWS Lambda function to dissociate the Elastic IP address from the instance, and alert the
Security team.
D. Attach an IAM policy to the Developer's IAM group to deny associate-address permissions. Create a custom AWS Config rule to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team.
Answer: D
QUESTION NO: 5
A DevOps Engineer must create a Linux AMI in an automated fashion. The newly created AMI identification must be stored in a location where other build pipelines can access the new identification programmatically What is the MOST cost-effective way to do this?
A. Build a pipeline in AWS CodePipeline to download and save the latest operating system Open
Virtualization Format (OVF) image to an Amazon S3 bucket, then customize the image using the guestfish utility. Use the virtual machine (VM) import command to convert the OVF to an AMI, and store the AMI identification output as an AWS Systems Manager parameter.
B. Create an AWS Systems Manager automation document with values instructing how the image should be created. Then build a pipeline in AWS CodePipeline to execute the automation document to build the AMI when triggered. Store the AMI identification output as a Systems Manager parameter.
C. Launch an Amazon EC2 instance and install Packer. Then configure a Packer build with values defining how the image should be created. Build a Jenkins pipeline to invoke the Packer build when triggered to build an AMI. Store the AMI identification output in an Amazon DynamoDB table.
D. Build a pipeline in AWS CodePipeline to take a snapshot of an Amazon EC2 instance running the latest version of the application. Then start a new EC2 instance from the snapshot and update the running instance using an AWS Lambda function. Take a snapshot of the updated instance, then convert it to an AMI. Store the AMI identification output in an Amazon DynamoDB table.
Answer: C
Microsoft DP-203-KR - 결코 꿈은 이루어질것입니다. Amazon인증 ISM LEAD시험준비중이신 분들은Amazon인증 ISM LEAD시험통과가 많이 어렵다는것을 알고 있을것입니다. SAP C-TS462-2023 - 사이트에서 데모를 다운받아 보시면 덤프의 일부분 문제를 먼저 풀어보실수 있습니다.구매후 덤프가 업데이트되면 업데이트버전을 무료로 드립니다. Amazon인증Microsoft DP-600시험에 도전해보려고 없는 시간도 짜내고 거금을 들여 학원을 선택하셨나요? 사실 IT인증시험은 보다 간단한 공부방식으로 준비하시면 시간도 돈도 정력도 적게 들일수 있습니다. Omgzlook는 고객님께서 첫번째Amazon EMC D-CSF-SC-23시험에서 패스할수 있도록 최선을 다하고 있습니다.
Updated: May 28, 2022