아무런 노력을 하지 않고 승진이나 연봉인상을 꿈꾸고 있는 분이라면 이 글을 검색해낼수 없었을것입니다. 승진이나 연봉인상을 꿈꾸면 승진과 연봉인상을 시켜주는 회사에 능력을 과시해야 합니다. IT인증시험은 국제적으로 승인해주는 자격증을 취득하는 시험입니다. 학교공부하랴,회사다니랴 자격증공부까지 하려면 너무 많은 정력과 시간이 필요할것입니다. 그렇다고 자격증공부를 포기하면 자신의 위치를 찾기가 힘들것입니다. 사이트에서 데모를 다운받아 보시면 덤프의 일부분 문제를 먼저 풀어보실수 있습니다.구매후 덤프가 업데이트되면 업데이트버전을 무료로 드립니다.
Certified Internal IIA-CIA-Part3 Omgzlook 는 아주 우수한 IT인증자료사이트입니다.
IIA인증 IIA-CIA-Part3 - Business Knowledge for Internal Auditing시험유효덤프인증시험을 패스하여 취득한 자격증은 IT인사로서의 능력을 증명해주며 IT업계에 종사하는 일원으로서의 자존심입니다. Omgzlook에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이IIA인증IIA-CIA-Part3 시험합격시험을 패스할 수 있을 자료 등을 만들었습니다, Omgzlook 에서는 일년무료 업뎃을 제공하며, Omgzlook 의 덤프들은 모두 높은 정확도를 자랑합니다. Omgzlook 선택함으로 여러분이IIA인증IIA-CIA-Part3 시험합격시험에 대한 부담은 사라질 것입니다.
IIA인증 IIA-CIA-Part3시험유효덤프덤프로IIA인증 IIA-CIA-Part3시험유효덤프시험을 준비하여 한방에 시험패하세요. Omgzlook의IIA인증 IIA-CIA-Part3시험유효덤프덤프는 시험패스율이 거의 100%에 달하여 많은 사랑을 받아왔습니다. 저희 사이트에서 처음 구매하는 분이라면 덤프풀질에 의문이 갈것입니다.
IIA IIA-CIA-Part3시험유효덤프 - Omgzlook는 많은 IT인사들의 요구를 만족시켜드릴 수 있는 사이트입니다.
힘든IIA IIA-CIA-Part3시험유효덤프시험패스도 간단하게! Omgzlook의 전문가들은IIA IIA-CIA-Part3시험유효덤프 최신시험문제를 연구하여 시험대비에 딱 맞는IIA IIA-CIA-Part3시험유효덤프덤프를 출시하였습니다. Omgzlook덤프를 구매하시면 많은 정력을 기울이지 않으셔도 시험을 패스하여 자격증취득이 가능합니다. Omgzlook의 IIA IIA-CIA-Part3시험유효덤프덤프로 자격증 취득의 꿈을 이루어보세요.
Omgzlook 에서 출시한 제품 IIA인증IIA-CIA-Part3시험유효덤프시험덤프는 고득점으로 시험을 통과한 많은 분들이 검증한 완벽한 시험공부자료입니다. IT업계에 몇십년간 종사한 전문가들의 경험과 노하우로 제작된IIA인증IIA-CIA-Part3시험유효덤프덤프는 실제 시험문제에 대비하여 시험유형과 똑같은 유형의 문제가 포함되어있습니다.시험 불합격시 불합격성적표로 덤프비용환불신청을 약속드리기에 아무런 우려없이 덤프를 구매하여 공부하시면 됩니다.
IIA-CIA-Part3 PDF DEMO:
QUESTION NO: 1
Which of the following is not required by ISO 9000 standards?
A. Establishment of a quality management system.
B. Creation of an internal audit system.
C. Consistent high quality products.
D. Onsite inspections by a registrar.
Answer: C
Explanation:
ISO 9000 is a set of generic standards for establishing and maintaining a quality system within an entity. The standards provide no basis forjudging the quality of the end product. The marketplace makes this determination. The objective of ISO 9000 standards is to ensure consistent quality.
QUESTION NO: 2
Which statement best describes total quality management (TQM)?
A. TQM emphasizes reducing the cost of inspection.
B. TQM emphasizes better statistical quality control techniques.
C. TQM emphasizes doing each job right the first time.
D. TQM emphasizes encouraging cross-functional teamwork.
Answer: C
Explanation:
TQM establishes quality as an organizational objective and views it as a major component of the organization's service to its customers. It emphasizes employee training and commitment, productservice design and production, and customer service. Ordinarily, the quality of a product or service is as important to customers as cost and timeliness. Superior product quality is not merely the result of more inspection, better statistical quality control, and cross-functional teamwork.
Manufactures must make fundamental changes in the way they produce products and do each job right the first time.
QUESTION NO: 3
Which of the following is a characteristic of total quality management (TQM)?
A. Management by objectives.
B. On-the-job training by other workers.
C. Quality by final inspection.
D. Education and self-improvement.
Answer: D
Explanation:
TQM is the continuous pursuit of quality in every aspect of organizational activities. One of the means of achieving this is through employee training and empowerment.
QUESTION NO: 4
The use of teams in total quality management (TQM) is important because:
A. Well-managed teams can be highly creative and are able to address complex problems better than individuals can.
B. Teams are quicker to make decisions, thereby helping to reduce cycle time.
C. Employee motivation is higher for team members than for individual contributors.
D. The use of teams eliminates the need for supervision, thereby allowing a company to become leaner and more profitable.
Answer: A
Explanation:
Teams can use the diverse knowledge and skills of all team members. Employee involvement means training and empowering employees to harness their creativity for problem solving. Quality control circles are used to obtain input from employees and to locate the best perspective on problem solving.
QUESTION NO: 5
All of the following are generally included in a cost-of-quality report except:
A. Warranty claims.
B. Design engineering.
C. Supplier evaluations.
D. Lost contribution margin.
Answer: D
Explanation:
A cost-of-quality report includes most costs related to quality, specifically the costs of prevention, appraisal, internal failure, and external failure.
11. Which of the following is not an appropriate measure of quality?
A. Market share.
B. Delivery performance.
C. Customer satisfaction.
D. Raw materials costs.
Answer: D
Explanation:
Emphasizing lower input costs may result in more defective output, and higher input costs may or may not reflect the procurement of better raw materials. Financial measures are thus mostly unsuitable for measuring quality.
12. One of the main reasons that implementation of a total quality management (TQM) program works better through the use of teams is:
A. Teams are more efficient and help an organization reduce its staffing.
B. Employee motivation is always higher for team members than for individual contributors.
C. Teams are a natural vehicle for sharing ideas, which leads to process improvement.
D. The use of teams eliminates the need for supervision, thereby allowing a company to reduce staffing.
Answer: C
Explanation:
TQM promotes teamwork by modifying or eliminating traditional (and rigid) vertical hierarchies and instead forming flexible groups of specialists. Quality circles, cross-functional teams, and self-managed teams are typical formats. Teams are an excellent means of encouraging the sharing of ideas and removing process improvement obstacles.
13. If a company is customer-centered, its customers are defined as:
A. Only people external to the company who have purchased something from the company.
B. Only people internal to the company who directly use its product.
C. Anyone external to the company and those internal who rely on its product to get their job done.
D. Everybody external to the company who is currently doing, or may in the future do, business with the company.
Answer: C
Explanation:
One of the principles of total quality management (TQM) is customer orientation, whether the customer is internal or external. An internal customer is a member of the organization who relies on another member's work to accomplish his/her task.
14. Management of a company is attempting to build a reputation as a world-class manufacturer of quality products. Which of the following measures would not be used by the firm to measure quality?
A. The percentage of shipments returned by customers because of poor quality.
B. The number of parts shipped per day.
C. The number of defective parts per million.
D. The percentage of products passing quality tests the firsttime
Answer: B
Explanation:
The number of parts shipped per day would most likely be used as a measure of the effectiveness and efficiency of shipping procedures, not the quality of the product. This measure does not consider how many of the parts are defective.
15. Quality costing is similar in service and manufacturing organizations. Nevertheless, the differences
between these organizations have certain implications for quality management. Thus,
A. Direct labor costs are usually a higher percentage of total costs in manufacturing organizations.
B. External failure costs are relatively greater in service organizations.
C. Quality improvements resulting in more efficient use of labor time are more likely to be accepted by employees in service organizations.
D. Poor service is less likely to result in loss of customers than a faulty product.
Answer: B
Explanation:
External failure costs arise when problems occur after delivery. They occur because products or services are nonconforming or otherwise do not satisfy customers. External failure costs in service enterprises are even more important than in manufacturing environments. Faulty goods sometimes maybe reworked or replaced to a customer's satisfaction, but poor service tends to result in a loss of customers.
16. A means of limiting production delays caused by equipment breakdown and repair is to:
A. Schedule production based on capacity planning.
B. Plan maintenance activity based on an analysis of equipment repair work orders.
C. Pre-authorize equipment maintenance and overtime pay.
D. Establish a preventive maintenance program for all production equipment.
Answer: D
Explanation:
A preventive maintenance program reduces equipment breakdowns and repairs.
17. Under a total quality management (TQM) approach,
A. Measurement occurs throughout the process, and errors are caught and corrected at the source.
B. Quality control is performed by highly trained inspectors at the end of the production process.
C. Upper management assumes the primary responsibility for the quality of the products and services.
D. A large number of suppliers are used in order to obtain the lowest possible prices.
Answer: A
Explanation:
TQM emphasizes quality as a basic organizational function. TQM is the continuous pursuit of quality in every aspect of organizational activities. One of the basic principles of TQM is doing it right the first time. Thus, errors should be caught and corrected at the source.
18. Which of the following is a key to successful total quality management (TQM)?
A. Training quality inspectors.
B. Focusing intensely on the customer.
C. Creating appropriate hierarchies to increase efficiency.
D. Establishing a well-defined quality standard, then focusing on meeting it.
Answer: B
Explanation:
TQM emphasizes satisfaction of customers, both internal and external. TQM considers the supplier's relationship with the customer, identifies customer needs, and recognizes that everyone in a process is at some time a customer or supplier of someone else, either inside or outside of the organization. Thus, TQM begins with external customer requirements, identifies internal customer-supplier relationships and requirements, and establishes requirements for external suppliers.
19. The four categories of costs associated with product quality costs are:
A. External failure, internal failure, prevention, and carrying.
B. External failure, internal failure, prevention, and appraisal.
C. External failure, internal failure, training, and appraisal.
D. Warranty, product liability, training, and appraisal.
Answer: B
Explanation:
Prevention costs are incurred to prevent defects. Appraisal costs are incurred to detect defective output during and after the production process. Internal failure costs are associated with defective output discovered before shipping. External failure costs are associated with defective output discovered after it has reached the customer.
20. Statistical quality control often involves the use of control charts whose basic purpose is to:
A. Determine when accounting control procedures are not working.
B. Control labor costs in production operations.
C. Detect performance trends away from normal operations.
D. Monitor internal control applications of information technology.
Answer: C
Explanation:
Statistical control charts are graphic aids for monitoring the status of any process subject to random variations. The chart consists of three horizontal lines plotted on a horizontal time scale. The vertical scale represents the appropriate quantitative measure. The center line represents the average range or overall mean for the process being controlled. The other two lines are the upper control limit and the lower control limit. The processes are measured periodically, and the values are plotted on the chart. If the value falls within the control limits, no action is taken. If the value falls outside the limits, the process is considered "out of control," and an investigation is made for possible corrective action. Another advantage of the chart is that it makes trends visible.
Omgzlook의 IIA Salesforce CRM-Analytics-and-Einstein-Discovery-Consultant 덤프로 시험을 쉽게 패스한 분이 헤아릴수 없을 만큼 많습니다. Omgzlook의 IIA인증 Microsoft MS-900-KR시험덤프로 어려운 IIA인증 Microsoft MS-900-KR시험을 쉽게 패스해보세요. IIA SAP C_HRHPC_2405덤프는 이미 많은분들의 시험패스로 검증된 믿을만한 최고의 시험자료입니다. 인재가 넘치는 IT업계에서 자기의 자리를 지켜나가려면 학력보다 능력이 더욱 중요합니다.고객님의 능력을 증명해주는 수단은 국제적으로 승인받은 IT인증자격증이 아니겠습니까? IIA인증 SAP C_ARSCC_2404시험이 어렵다고 하여 두려워 하지 마세요. VMware 2V0-32.22 - 우리Omgzlook는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다.
Updated: May 27, 2022