Amazon AWS-DevOps Dumps 시험탈락시Amazon AWS-DevOps Dumps덤프비용전액을 환불해드릴만큼 저희 덤프자료에 자신이 있습니다. Omgzlook에서는Amazon AWS-DevOps Dumps덤프를 항상 최신버전이도록 보장해드리고 싶지만Amazon AWS-DevOps Dumps시험문제변경시점을 예측할수 없어 시험에서 불합격받을수도 간혹 있습니다. 하지만 시험에서 떨어지면 덤프비용을 전액 환불해드려 고객님의 이익을 보장해드립니다. Omgzlook의Amazon인증 AWS-DevOps Dumps덤프는 실제시험문제의 출제방형을 철저하게 연구해낸 말 그대로 시험대비공부자료입니다. 덤프에 있는 내용만 마스터하시면 시험패스는 물론 멋진 IT전문가로 거듭날수 있습니다. Amazon AWS-DevOps Dumps 덤프는 인기덤프인데 지금까지 덤프를 구매한후 환불신청하신 분은 아직 없었습니다.
Amazon AWS-DevOps Dumps덤프의 데모를 다운받아 보시면 구매결정이 훨씬 쉬워질것입니다.
우리Omgzlook의 덤프는 여러분이Amazon AWS-DevOps - AWS Certified DevOps Engineer - Professional (DOP-C01) Dumps인증시험응시에 도움이 되시라고 제공되는 것입니다, 우라Omgzlook에서 제공되는 학습가이드에는Amazon AWS-DevOps - AWS Certified DevOps Engineer - Professional (DOP-C01) Dumps인증시험관연 정보기술로 여러분이 이 분야의 지식 장악에 많은 도움이 될 것이며 또한 아주 정확한Amazon AWS-DevOps - AWS Certified DevOps Engineer - Professional (DOP-C01) Dumps시험문제와 답으로 여러분은 한번에 안전하게 시험을 패스하실 수 있습니다,Amazon AWS-DevOps - AWS Certified DevOps Engineer - Professional (DOP-C01) Dumps인증시험을 아주 높은 점수로 패스할 것을 보장해 드립니다, 문제가 많으면 고객들의 시간을 허비하게 됩니다. Omgzlook는 응시자에게 있어서 시간이 정말 소중하다는 것을 잘 알고 있습니다.
Omgzlook는 최선을 다하여 여러분이 한번에AWS-DevOps Dumps인증시험을 패스하도록 도와드릴 것입니다. 여러분은 우리 Omgzlook 선택함으로 일석이조의 이익을 누릴 수 있습니다. 첫쨰는 관여지식은 아주 알차게 공부하실 수 있습니다.둘째는 바로 시험을 안전하게 한번에 통과하실 수 있다는 거죠.그리고 우리는 일년무료 업데이트서비스를 제공합니다.덤프가 업뎃이되면 우리는 모두 무료로 보내드립니다.만약 시험에서 실패한다면 우리 또한 덤프비용전액을 환불해 드립니다.
Amazon AWS-DevOps Dumps - 만약Omgzlook를 선택하였다면 여러분은 반은 성공한 것입니다.
Omgzlook에는Amazon AWS-DevOps Dumps인증시험의 특별한 합습가이드가 있습니다. 여러분은 많은 시간과 돈을 들이지 않으셔도 많은 IT관련지식을 배우실수 있습니다.그리고 빠른 시일 내에 여러분의 IT지식을 인증 받으실 있습니다. Omgzlook인증자료들은 우리의 전문가들이 자기만의 지식과 몇 년간의 경험으로 준비중인 분들을 위하여 만들었습니다.
It 업계 중 많은 분들이 인증시험에 관심이 많은 인사들이 많습니다.it산업 중 더 큰 발전을 위하여 많은 분들이Amazon AWS-DevOps Dumps를 선택하였습니다.인증시험은 패스를 하여야 자격증취득이 가능합니다.그리고 무엇보다도 통행증을 받을 수 잇습니다.Amazon AWS-DevOps Dumps은 그만큼 아주 어려운 시험입니다. 그래도Amazon AWS-DevOps Dumps인증을 신청하여야 좋은 선택입니다.우리는 매일매일 자신을 업그레이드 하여야만 이 경쟁이 치열한 사회에서 살아남을 수 있기 때문입니다.
AWS-DevOps PDF DEMO:
QUESTION NO: 1
A company has an application that has predictable peak traffic times. The company wants the application instances to scale up only during the peak times. The application stores state in Amazon
DynamoDB. The application environment uses a standard Node.js application stack and custom Chef recipes stored in a private Git repository.
Which solution is MOST cost-effective and requires the LEAST amount of management overhead when performing rolling updates of the application environment?
A. Configure AWS OpsWorks stacks and push the custom recipes to an Amazon S3 bucket and configure custom recipes to point to the S3 bucket. Then add an application layer type for a standard
Node.js application server and configure the custom recipe to deploy the application in the deploy step from the S3 bucket. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB
B. Create a custom AMI with the Node.js environment and application stack using Chef recipes. Use the AMI in an Auto Scaling group and set up scheduled scaling for the required times, then set up an
Amazon EC2 IAM role that provides permission to access DynamoDB.
C. Create a Docker file that uses the Chef recipes for the application environment based on an official
Node.js Docker image. Create an Amazon ECS cluster and a service for the application environment, then create a task based on this Docker image. Use scheduled scaling to scale the containers at the appropriate times and attach a task-level IAM role that provides permission to access DynamoD
D. Configure AWS OpsWorks stacks and use custom Chef cookbooks. Add the Git repository information where the custom recipes are stored, and add a layer in OpsWorks for the Node.js application server.
Then configure the custom recipe to deploy the application in the deploy step. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB.
Answer: A
QUESTION NO: 2
An Application team is refactoring one of its internal tools to run in AWS instead of on- premises hardware.
All of the code is currently written in Python and is standalone. There is also no external state store or relational database to be queried.
Which deployment pipeline incurs the LEAST amount of changes between development and production?
A. Developers should use their native Python environment. When Dependencies are changed and a new container is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use AWS CloudFormation with the custom container to deploy the new Amazon ECS.
B. Developers should use Docker for local development. Use AWS SMS to import these containers as
AMIs for Amazon EC2 whenever dependencies are updated. Use AWS CodePipeline to test new code changes against the Auto Scaling group.
C. Developers should use their native Python environment. When Dependencies are changed and a new code is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use CodePipeline and CodeBuild with the custom container to test new code changes inside AWS Elastic Beanstalk
Answer: B
QUESTION NO: 3
A company is migrating an application to AWS that runs on a single Amazon EC2 instance.
Because of licensing limitations, the application does not support horizontal scaling. The application will be using Amazon Aurora for its database.
How can the DevOps Engineer architect automated healing to automatically recover from EC2 and
Aurora failures, in addition to recovering across Availability Zones (AZs), in the MOST cost-effective manner?
A. Create an EC2 instance and enable instance recovery. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance if the primary database instance fails.
B. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to start a new EC2 instance in an available AZ when the instance status reaches a failure state. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance when the primary database instance fails.
C. Create an EC2 Auto Scaling group with a minimum and maximum instance count of 1, and have it span across AZs. Use a single-node Aurora instance.
D. Assign an Elastic IP address on the instance. Create a second EC2 instance in a second AZ. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to move the Elastic IP address to the second instance when the first instance fails. Use a single-node Aurora instance.
Answer: B
QUESTION NO: 4
A Security team is concerned that a Developer can unintentionally attach an Elastic IP address to an Amazon EC2 instance in production. No Developer should be allowed to attach an Elastic IP address to an instance.
The Security team must be notified if any production server has an Elastic IP address at any time.
How can this task be automated?
A. Ensure that all IAM groups are associated with Developers do not have associate-address permissions.
Create a scheduled AWS Lambda function to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team if an instance has an Elastic IP address associated with it.
B. Create an AWS Config rule to check that all production instances have the EC2 IAM roles that include deny associate-address permissions. Verify whether there is an Elastic IP address associated with any instance, and alert the Security team if an instance has an Elastic IP address associated with it.
C. Use Amazon Athena to query AWS CloudTrail logs to check for any associate-address attempts.
Create an AWS Lambda function to dissociate the Elastic IP address from the instance, and alert the
Security team.
D. Attach an IAM policy to the Developer's IAM group to deny associate-address permissions. Create a custom AWS Config rule to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team.
Answer: D
QUESTION NO: 5
A DevOps Engineer must create a Linux AMI in an automated fashion. The newly created AMI identification must be stored in a location where other build pipelines can access the new identification programmatically What is the MOST cost-effective way to do this?
A. Build a pipeline in AWS CodePipeline to download and save the latest operating system Open
Virtualization Format (OVF) image to an Amazon S3 bucket, then customize the image using the guestfish utility. Use the virtual machine (VM) import command to convert the OVF to an AMI, and store the AMI identification output as an AWS Systems Manager parameter.
B. Create an AWS Systems Manager automation document with values instructing how the image should be created. Then build a pipeline in AWS CodePipeline to execute the automation document to build the AMI when triggered. Store the AMI identification output as a Systems Manager parameter.
C. Launch an Amazon EC2 instance and install Packer. Then configure a Packer build with values defining how the image should be created. Build a Jenkins pipeline to invoke the Packer build when triggered to build an AMI. Store the AMI identification output in an Amazon DynamoDB table.
D. Build a pipeline in AWS CodePipeline to take a snapshot of an Amazon EC2 instance running the latest version of the application. Then start a new EC2 instance from the snapshot and update the running instance using an AWS Lambda function. Take a snapshot of the updated instance, then convert it to an AMI. Store the AMI identification output in an Amazon DynamoDB table.
Answer: C
Amazon CLF-C02 - 그리고 우리는 온라인무료 서비스도 제공되어 제일 빠른 시간에 소통 상담이 가능합니다. 우리Omgzlook 사이트에서Amazon Network Appliance NS0-404관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의Omgzlook에 신뢰감을 느끼게 됩니다.빨리 우리 Omgzlook의 덤프를 만나보세요. Omgzlook Amazon인증HP HPE6-A72인증시험자료는 100% 패스보장을 드립니다 Omgzlook Amazon인증ECCouncil 212-82시험덤프 구매전 구매사이트에서 무료샘플을 다운받아 PDF버전 덤프내용을 우선 체험해보실수 있습니다. Omgzlook의Amazon인증 Cisco 700-805덤프로 시험을 패스하고 자격증을 취득하여 더욱더 큰 무대로 진출해보세요.
Updated: May 28, 2022