시험문제커버율이 높아 덤프에 있는 문제만 조금의 시간의 들여 공부하신다면 누구나 쉽게 시험패스가능합니다. IT업종 종사자분들은 모두 승진이나 연봉인상을 위해 자격증을 취득하려고 최선을 다하고 계실것입니다. 하지만 쉴틈없는 야근에 시달려서 공부할 시간이 없어 스트레스가 많이 쌓였을것입니다. 인테넷에 검색하면 Amazon AWS-DevOps참고덤프시험덤프공부자료가 헤아릴수 없을 정도로 많이 검색됩니다. 그중에서Omgzlook의Amazon AWS-DevOps참고덤프제품이 인지도가 가장 높고 가장 안전하게 시험을 패스하도록 지름길이 되어드릴수 있습니다. Amazon AWS-DevOps참고덤프덤프는 최근Amazon AWS-DevOps참고덤프시험의 기출문제모음으로 되어있기에 적중율이 높습니다.시험에서 떨어지면 덤프비용 전액 환불해드리기에 우려없이 덤프를 주문하셔도 됩니다.
AWS Certified DevOps Engineer AWS-DevOps 더는 고민고민 하지마시고 덤프 받아가세요.
AWS Certified DevOps Engineer AWS-DevOps참고덤프 - AWS Certified DevOps Engineer - Professional (DOP-C01) Omgzlook에서 제공하는 자료로 응시는 문제없습니다, 여러분은 고득점으로 시험을 통과할 것입니다. 만약 아직도Amazon AWS-DevOps 인증시험인증시험 위하여 많은 시간과 정력을 소모하며 열심히 공부하고 있습니까? 아직도 어덯게하면Amazon AWS-DevOps 인증시험인증시험을 빠르게 취득할 수 있는 방법을 못찿고 계십니까? 지금Omgzlook에서Amazon AWS-DevOps 인증시험인증시험을 안전하게 넘을 수 있도록 대책을 내드리겠습니다. 아주 신기한 효과가 있을 것입니다.
많은 시간과 정신력을 투자하고 모험으로Amazon인증AWS-DevOps참고덤프시험에 도전하시겠습니까? 아니면 우리Omgzlook 의 도움으로 시간을 절약하시겠습니까? 요즘 같은 시간인 즉 모든 것인 시대에 여러분은 당연히 Omgzlook의 제품이 딱 이라고 생각합니다. 그리고 우리 또한 그 많은 덤프판매사이트 중에서도 단연 일등이고 생각합니다. 우리 Omgzlook선택함으로 여러분은 성공을 선택한 것입니다.
Amazon Amazon AWS-DevOps참고덤프 덤프도 마찬가지 입니다.
Omgzlook의Amazon AWS-DevOps참고덤프 인증시험덤프는 자주 업데이트 되고, 오래 되고 더 이상 사용 하지 않는 문제들은 바로 삭제해버리며 새로운 최신 문제들을 추가 합니다. 이는 응시자가 확실하고도 빠르게Amazon AWS-DevOps참고덤프덤프를 마스터하고Amazon AWS-DevOps참고덤프시험을 패스할수 있도록 하는 또 하나의 보장입니다. 매력만점Amazon AWS-DevOps참고덤프덤프 강력 추천합니다.
Omgzlook을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다. 만약Omgzlook선택여부에 대하여 망설이게 된다면 여러분은 우선 우리 Omgzlook 사이트에서 제공하는Amazon AWS-DevOps참고덤프시험정보 관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있습니다.
AWS-DevOps PDF DEMO:
QUESTION NO: 1
You currently have the following setup in AWS
1) An Elastic Load Balancer
2) Auto Scaling Group which launches EC2 Instances
3) AMIs with your code pre-installed
You want to deploy the updates of your app to only a certain number of users. You want to have a cost-effective solution. You should also be able to revert back quickly. Which of the below solutions is the most feasible one?
A. Create a full second stack of instances, cut the DNS over to the new stack of instances, and change the DNS back if a rollback is needed.
B. Create new AM Is with the new app. Then use the new EC2 instances in half proportion to the older instances.
C. Redeploy with AWS Elastic Beanstalk and Elastic Beanstalk versions. Use Route 53 Weighted
Round Robin records to adjust the proportion of traffic hitting the two ELBs
D. Create a second ELB, and a new Auto Scaling Group assigned a new Launch Configuration. Create a new AMI with the updated app. Use Route53 Weighted Round Robin records to adjust the proportion of traffic hitting the two ELBs.
Answer: D
Explanation
The Weighted Routing policy of Route53 can be used to direct a proportion of traffic to your application. The best option is to create a second CLB, attach the new Autoscaling Group and then use Route53 to divert the traffic.
Option B is wrong because just having EC2 instances running with the new code will not help.
Option C is wrong because Clastic beanstalk is good for development environments, and also there is no mention of having 2 environments where environment url's can be swapped.
Option D is wrong because you still need Route53 to split the traffic.
For more information on Route53 routing policies, please refer to the below link:
* http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/routing-policy.html
QUESTION NO: 2
A company hosts parts of a Python-based application using AWS Elastic Beanstalk. An Elastic
Beanstalk CLI is being used to create and update the environments. The Operations team detected an increase in requests in one of the Elastic Beanstalk environments that caused downtime overnight.
The team noted that the policy used for AWS Auto Scaling is NetworkOut. Based on load testing metrics, the team determined that the application needs to scale CPU utilization to improve the resilience of the environments. The team wants to implement this across all environments automatically.
Following AWS recommendations, how should this automation be implemented?
A. Using ebextensions, create a custom resource that modifies the AWSEBAutoScalingScaleUpPolicy and AWSEBAutoScalingScaleDownPolicy resources to use CPUUtilization as a metric to scale for the
Auto Scaling group.
B. Using ebextensions, place a script within the files key and place it in
/opt/elasticbeanstalk/hooks/appdeploy/pre to perform an API call to modify the scaling metric to
CPUUtilization for the Auto Scaling configuration. Use leader_only to place this script in only the first instance launched within the environment.
C. Using ebextensions, place a command within the container_commands key to perform an API call to modify the scaling metric to CPUUtilization for the Auto Scaling configuration. Use leader_only to execute this command in only the first instance launched within the environment.
D. Using ebextensions, configure the option setting MeasureName to CPUUtilization within the aws:autoscaling:trigger namespace.
Answer: D
QUESTION NO: 3
A DevOps Engineer manages a web application that runs on Amazon EC2 instances behind an
Application Load Balancer (ALB). The instances run in an EC2 Auto Scaling group across multiple
Availability Zones.
The Engineer needs to implement a deployment strategy that:
Launches a second fleet of instances with the same capacity as the original fleet.
Maintains the original fleet unchanged while the second fleet is launched.
Transitions traffic to the second fleet when the second fleet is fully deployed.
Terminates the original fleet automatically 1 hour after transition.
Which solution will satisfy these requirements?
A. Use AWS Elastic Beanstalk with the configuration set to Immutable. Create an .ebextension using the Resources key that sets the deletion policy of the ALB to 1 hour, and deploy the application.
B. Use an AWS CloudFormation template with a retention policy for the ALB set to 1 hour. Update the Amazon Route 53 record to reflect the new ALB.
C. Use AWS CodeDeploy with a deployment group configured with a blue/green deployment configuration. Select the option Terminate the original instances in the deployment group with a waiting period of 1 hour.
D. Use two AWS Elastic Beanstalk environments to perform a blue/green deployment from the original environment to the new one. Create an application version lifecycle policy to terminate the original environment in 1 hour.
Answer: D
QUESTION NO: 4
A company has developed an AWS Lambda function that handles orders received through an
API. The company is using AWS CodeDeploy to deploy the Lambda function as the final stage of a
CI/CD pipeline. A DevOps Engineer has notices there are intermittent failures of the ordering API for a few seconds after deployment. After some investigation, the DevOps Engineer believes the failures are due to database changes the CloudFormation stack for the application lambda function begins executing. How should the DevOps Engineer overcome this?
A. Add a BeforeAllowTraffic hook to the AppSpec file that tests and waits for any necessary database changes before traffic can flow to the new version of the Lambda function
B. Add an AfterAllowTraffic hook to the AppSpec file that forces traffic to wait for any pending database changes before allowing the new version of the Lambda function to respond
C. Add a ValidateService hook to the AppSpec file that inspects incoming traffic and rejects the payload if dependent services such as the database are not yet ready
D. Add a BeforeInstall hook to the AppSpec file that tests and waits for any necessary database changes before deploying the new version of the Lambda function
Answer: B
QUESTION NO: 5
According to Information Security Policy, changes to the contents of objects inside production
Amazon S3 bucket that contain encrypted secrets should only be made by a trusted group of administrators.
How should a DevOps Engineer create real-time, automated checks to meet this requirement?
A. Create a metrics filter for Amazon CloudWatch logs to check for Amazon S3 bucket-level permission changes and to check the IAM user's membership in an administrator's IAM role.
B. Create an AWS Lambda function that is triggered by Amazon S3 data events for object changes and that also checks the IAM user's membership in an administrator's IAM role.
C. Create a periodic AWS Config rule to query AWS CloudTrail logs for changes to the Amazon S3 bucket-level permissions and to check the IAM user's membership in an administrator's IAM role.
D. Create a periodic AWS Config rule to query Amazon S3 Logs for changes and to check the IAM user's membership in an administrator's IAM role.
Answer: B
Omgzlook 의 학습가이드에는Amazon ISQI CTAL-TTA_Syll19_4.0인증시험의 예상문제, 시험문제와 답입니다. 만약 Amazon SAP C_ARSUM_2404 덤프자료를 구매하여 공부한후 시험에 탈락할시 불합격성적표와 주문번호를 메일로 보내오시면 덤프비용을 바로 환불해드립니다. 여러분이 다른 사이트에서도Amazon인증IBM C1000-065시험 관련덤프자료를 보셨을 것입니다 하지만 우리Omgzlook의 자료만의 최고의 전문가들이 만들어낸 제일 전면적이고 또 최신 업데이트일 것입니다.우리덤프의 문제와 답으로 여러분은 꼭 한번에Amazon인증IBM C1000-065시험을 패스하실 수 있습니다. Omgzlook는 전문적인 IT인증시험덤프를 제공하는 사이트입니다.Cisco 300-710인증시험을 패스하려면 아주 현병한 선택입니다. Omgzlook선택으로Amazon GARP 2016-FRR시험을 패스하도록 도와드리겠습니다.
Updated: May 28, 2022