현재Amazon AWS-DevOps시험응시인증시험을 위하여 노력하고 있습니까? 빠르게Amazon인증 AWS-DevOps시험응시시험자격증을 취득하고 싶으시다면 우리 Omgzlook 의 덤프를 선택하시면 됩니다,. Omgzlook를 선택함으로Amazon AWS-DevOps시험응시인증시험패스는 꿈이 아닌 현실로 다가올 것입니다, Amazon AWS-DevOps시험응시 덤프샘플문제를 다운받은후 굳게 믿고 주문해보세요. 궁금한 점이 있으시면 온라인서비스나 메일로 상담받으시면 됩니다. 저희가 알아본 데 의하면 많은it인사들이Amazon인증AWS-DevOps시험응시시험을 위하여 많은 시간을 투자하고 잇다고 합니다.하지만 특별한 학습 반 혹은 인터넷강이 같은건 선택하지 않으셨습니다.때문에 패스는 아주 어렵습니다.보통은 한번에 패스하시는 분들이 적습니다.우리 Omgzlook에서는 아주 믿을만한 학습가이드를 제공합니다.우리 Omgzlook에는Amazon인증AWS-DevOps시험응시테스트버전과Amazon인증AWS-DevOps시험응시문제와 답 두 가지 버전이 있습니다.우리는 여러분의Amazon인증AWS-DevOps시험응시시험을 위한 최고의 문제와 답 제공은 물론 여러분이 원하는 모든 it인증시험자료들을 선사할 수 있습니다.
AWS Certified DevOps Engineer AWS-DevOps 응시자들도 더욱더 많습니다.
Omgzlook는Amazon AWS-DevOps - AWS Certified DevOps Engineer - Professional (DOP-C01)시험응시덤프를 시험문제변경에 따라 계속 갱신하여 고객님께서 받은 것이Amazon AWS-DevOps - AWS Certified DevOps Engineer - Professional (DOP-C01)시험응시 시험의 가장 최신 기출문제임을 보증해드립니다. Omgzlook에서는 여러분들의 시간돠 돈을 절약해드리기 위하여 저렴한 가격에 최고의 품질을 지닌 퍼펙트한Amazon인증AWS-DevOps 인증시험시험덤플르 제공해드려 고객님의 시험준비에 편안함을 선물해드립니다. Omgzlook제품을 한번 믿어보세요.
또한 구매 후 일년무료 업데이트버전을 받을 수 있는 기회를 얻을 수 있습니다. Amazon AWS-DevOps시험응시인증시험패스는 아주 어렵습니다. 자기에맞는 현명한 학습자료선택은 성공을 내딛는 첫발입니다.
Amazon인증 Amazon AWS-DevOps시험응시시험은 IT인증시험중 가장 인기있는 시험입니다.
Omgzlook는 여러분의 꿈을 이루어줄 뿐만 아니라 일년무료 업뎃서비스도 따릅니다. Omgzlook에서 제공하는 덤프로 여러분은 1000%시험을 패스하실수 있고Amazon AWS-DevOps시험응시자격증을 취득하실 수 있습니다.지금 바로 사이트에서Amazon AWS-DevOps시험응시덤프데모 즉 덤프의 일부 문제와 답을 다운 받으셔서 체험하실 수 있습니다.
Amazon인증 AWS-DevOps시험응시시험이 어려워 자격증 취득을 망설이는 분들이 많습니다. Omgzlook가 있으면 이런 걱정은 하지 않으셔도 됩니다.
AWS-DevOps PDF DEMO:
QUESTION NO: 1
A company has developed an AWS Lambda function that handles orders received through an
API. The company is using AWS CodeDeploy to deploy the Lambda function as the final stage of a
CI/CD pipeline. A DevOps Engineer has notices there are intermittent failures of the ordering API for a few seconds after deployment. After some investigation, the DevOps Engineer believes the failures are due to database changes the CloudFormation stack for the application lambda function begins executing. How should the DevOps Engineer overcome this?
A. Add a BeforeAllowTraffic hook to the AppSpec file that tests and waits for any necessary database changes before traffic can flow to the new version of the Lambda function
B. Add an AfterAllowTraffic hook to the AppSpec file that forces traffic to wait for any pending database changes before allowing the new version of the Lambda function to respond
C. Add a ValidateService hook to the AppSpec file that inspects incoming traffic and rejects the payload if dependent services such as the database are not yet ready
D. Add a BeforeInstall hook to the AppSpec file that tests and waits for any necessary database changes before deploying the new version of the Lambda function
Answer: B
QUESTION NO: 2
A Security team is concerned that a Developer can unintentionally attach an Elastic IP address to an Amazon EC2 instance in production. No Developer should be allowed to attach an Elastic IP address to an instance.
The Security team must be notified if any production server has an Elastic IP address at any time.
How can this task be automated?
A. Ensure that all IAM groups are associated with Developers do not have associate-address permissions.
Create a scheduled AWS Lambda function to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team if an instance has an Elastic IP address associated with it.
B. Create an AWS Config rule to check that all production instances have the EC2 IAM roles that include deny associate-address permissions. Verify whether there is an Elastic IP address associated with any instance, and alert the Security team if an instance has an Elastic IP address associated with it.
C. Use Amazon Athena to query AWS CloudTrail logs to check for any associate-address attempts.
Create an AWS Lambda function to dissociate the Elastic IP address from the instance, and alert the
Security team.
D. Attach an IAM policy to the Developer's IAM group to deny associate-address permissions. Create a custom AWS Config rule to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team.
Answer: D
QUESTION NO: 3
A DevOps Engineer manages a web application that runs on Amazon EC2 instances behind an
Application Load Balancer (ALB). The instances run in an EC2 Auto Scaling group across multiple
Availability Zones.
The Engineer needs to implement a deployment strategy that:
Launches a second fleet of instances with the same capacity as the original fleet.
Maintains the original fleet unchanged while the second fleet is launched.
Transitions traffic to the second fleet when the second fleet is fully deployed.
Terminates the original fleet automatically 1 hour after transition.
Which solution will satisfy these requirements?
A. Use AWS Elastic Beanstalk with the configuration set to Immutable. Create an .ebextension using the Resources key that sets the deletion policy of the ALB to 1 hour, and deploy the application.
B. Use an AWS CloudFormation template with a retention policy for the ALB set to 1 hour. Update the Amazon Route 53 record to reflect the new ALB.
C. Use AWS CodeDeploy with a deployment group configured with a blue/green deployment configuration. Select the option Terminate the original instances in the deployment group with a waiting period of 1 hour.
D. Use two AWS Elastic Beanstalk environments to perform a blue/green deployment from the original environment to the new one. Create an application version lifecycle policy to terminate the original environment in 1 hour.
Answer: D
QUESTION NO: 4
A company has an application that has predictable peak traffic times. The company wants the application instances to scale up only during the peak times. The application stores state in Amazon
DynamoDB. The application environment uses a standard Node.js application stack and custom Chef recipes stored in a private Git repository.
Which solution is MOST cost-effective and requires the LEAST amount of management overhead when performing rolling updates of the application environment?
A. Configure AWS OpsWorks stacks and push the custom recipes to an Amazon S3 bucket and configure custom recipes to point to the S3 bucket. Then add an application layer type for a standard
Node.js application server and configure the custom recipe to deploy the application in the deploy step from the S3 bucket. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB
B. Create a custom AMI with the Node.js environment and application stack using Chef recipes. Use the AMI in an Auto Scaling group and set up scheduled scaling for the required times, then set up an
Amazon EC2 IAM role that provides permission to access DynamoDB.
C. Create a Docker file that uses the Chef recipes for the application environment based on an official
Node.js Docker image. Create an Amazon ECS cluster and a service for the application environment, then create a task based on this Docker image. Use scheduled scaling to scale the containers at the appropriate times and attach a task-level IAM role that provides permission to access DynamoD
D. Configure AWS OpsWorks stacks and use custom Chef cookbooks. Add the Git repository information where the custom recipes are stored, and add a layer in OpsWorks for the Node.js application server.
Then configure the custom recipe to deploy the application in the deploy step. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB.
Answer: A
QUESTION NO: 5
An Application team is refactoring one of its internal tools to run in AWS instead of on- premises hardware.
All of the code is currently written in Python and is standalone. There is also no external state store or relational database to be queried.
Which deployment pipeline incurs the LEAST amount of changes between development and production?
A. Developers should use their native Python environment. When Dependencies are changed and a new container is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use AWS CloudFormation with the custom container to deploy the new Amazon ECS.
B. Developers should use Docker for local development. Use AWS SMS to import these containers as
AMIs for Amazon EC2 whenever dependencies are updated. Use AWS CodePipeline to test new code changes against the Auto Scaling group.
C. Developers should use their native Python environment. When Dependencies are changed and a new code is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use CodePipeline and CodeBuild with the custom container to test new code changes inside AWS Elastic Beanstalk
Answer: B
여러분이 다른 사이트에서도Amazon인증EMC D-PEMX-DY-23시험 관련덤프자료를 보셨을 것입니다 하지만 우리Omgzlook의 자료만의 최고의 전문가들이 만들어낸 제일 전면적이고 또 최신 업데이트일 것입니다.우리덤프의 문제와 답으로 여러분은 꼭 한번에Amazon인증EMC D-PEMX-DY-23시험을 패스하실 수 있습니다. Amazon인증 Microsoft MB-700시험은 중요한 IT인증자격증을 취득하는 필수시험과목입니다Amazon인증 Microsoft MB-700시험을 통과해야만 자격증 취득이 가능합니다.자격증을 많이 취득하면 자신의 경쟁율을 높여 다른능력자에 의해 대체되는 일은 면할수 있습니다.Omgzlook에서는Amazon 인증Microsoft MB-700시험대비덤프를 출시하여 여러분이 IT업계에서 더 높은 자리에 오르도록 도움드립니다. Omgzlook는 여러분이 한번에Amazon EMC D-PVM-OE-23인증시험을 패스함을 보장 드립니다. Omgzlook 에서는 Amazon Microsoft AZ-900 시험에 대비한 고품질 Amazon Microsoft AZ-900덤프를 제공해 드립니다. 실제Amazon인증EMC D-PVM-OE-23시험문제유형과 같은 형식으로 제작된Amazon인증EMC D-PVM-OE-23 시험공부자료로서Omgzlook덤프의 실용가치를 자랑하고 있습니다.덤프를 공부하여 시험불합격하시면 덤프비용은 환불처리해드립니다.
Updated: May 28, 2022