Omgzlook 에서는 The Open Group OG0-092시험난이도 시험에 대비한 고품질 The Open Group OG0-092시험난이도덤프를 제공해 드립니다. The Open Group OG0-092시험난이도덤프는 IT 업계 종사자들에 있어서 아주 중요한 인증시험이자 인기 자격증을 취득할수 있는 필수과목입니다. The Open Group OG0-092시험난이도시험을 합격하여 자격증을 취득하시면 취업하는데 가산점이 될수 있고 급여 인상이나 이직에도 많을 도움을 드릴수 있습니다. 이런 자료들은 여러분이The Open Group인증시험중의OG0-092시험난이도시험을 안전하게 패스하도록 도와줍니다. Omgzlook에서 제공하는 덤프들은 모두 100%통과 율을 보장하며 그리고 일년무료 업뎃을 제공합니다 시험에서 불합격성적표를 받으시면 덤프구매시 지불한 덤프비용은 환불해드립니다.
The Open Group Certification OG0-092 그리고 우리는 덤프를 구매 시 일년무료 업뎃을 제공합니다.
Paypal을 거쳐서 지불하면 저희측에서The Open Group OG0-092 - TOGAF 9 Part 2시험난이도덤프를 보내드리지 않을시 paypal에 환불신청하실수 있습니다. Omgzlook는The Open Group OG0-092 시험자료인증시험의 촉매제 같은 사이트입니다.The Open Group OG0-092 시험자료인증시험 관연 덤프가 우리Omgzlook에서 출시되었습니다. 여러분이The Open Group OG0-092 시험자료인증시험으로 나 자신과 자기만의 뛰어난 지식 면을 증명하고 싶으시다면 우리 Omgzlook의The Open Group OG0-092 시험자료덤프자료가 많은 도움이 될 것입니다.
다른 사이트에서도The Open Group OG0-092시험난이도인증시험관련 자료를 보셨다고 믿습니다.하지만 우리 Omgzlook의 자료는 차원이 다른 완벽한 자료입니다.100%통과 율은 물론Omgzlook을 선택으로 여러분의 직장생활에 더 낳은 개변을 가져다 드리며 ,또한Omgzlook를 선택으로 여러분은 이미 충분한 시험준비를 하였습니다.우리는 여러분이 한번에 통과하게 도와주고 또 일년무료 업데이트서비스도 드립니다.
The Open Group인증The Open Group OG0-092시험난이도시험패는Omgzlook제품으로 고고고!
Omgzlook 는 여러분의 it전문가 꿈을 이루어드리는 사이트 입다. Omgzlook는 여러분이 우리 자료로 관심 가는 인중시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. 아직도The Open Group OG0-092시험난이도인증시험으로 고민하시고 계십니까? The Open Group OG0-092시험난이도인증시험가이드를 사용하실 생각은 없나요? Omgzlook는 여러분에 편리를 드릴 수 잇습니다. Omgzlook의 자료는 시험대비최고의 덤프로 시험패스는 문제없습니다. Omgzlook의 각종인증시험자료는 모두기출문제와 같은 것으로 덤프보고 시험패스는 문제없습니다. Omgzlook의 퍼펙트한 덤프인 M crosoftOG0-092시험난이도인증시험자료의 문제와 답만 열심히 공부하면 여러분은 완전 안전히The Open Group OG0-092시험난이도인증자격증을 취득하실 수 있습니다.
시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해Omgzlook에서는The Open Group인증 OG0-092시험난이도시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전The Open Group인증 OG0-092시험난이도덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이Omgzlook에서 제공해드리는The Open Group인증 OG0-092시험난이도영어버전덤프만 공부하시면 자격증을 딸수 있습니다.
OG0-092 PDF DEMO:
QUESTION NO: 1
Scenario: Global Mobile 1
Please read this scenario prior to answering the question
Global Mobile is a mobile telecommunications company formed through a series of mergers and acquisitions. They are yet to fully integrate the customer service systems for the most recent acquisitions, and as result, customer service has been a major concern for the Chief Technology Officer.
Results for the last two quarters have shown that Average Revenue Per User (ARPU) and the customer retention (Churn) rate have fallen below the industry average. The Corporate Marketing group has published some new findings about customer satisfaction. The customers appear to be switching to Air
Light, a competitor, because of superior customer service. Global Mobile actually has better coverage in nearly all markets than Air Light, and good roaming agreements that keep rates low for business travelers.
But, customer satisfaction has remained low.
The Business Strategy group and the Enterprise Architecture group have conducted a high-level project to develop the enterprise-wide strategic plan. They have developed a business scenario which contains a good conceptual model of what needs to be done, and also identifies the key requirements. This was used in preparing the proposal presented to the Executive Council and the Corporate Board.
The planning for the program has been underway for several months. Global Mobile has selected TOGAF
9 as the basis for its Enterprise Architecture.
The Corporate Board has approved funding for a multi-million Euro conversion to transition to a packaged
Customer Service System. It is anticipated that the overall program will take five years to complete, but there are some tactical projects that can commence immediately to address the situation. The Corporate
Board has placed one additional major constraint on the program. In addition to achieving the business outcomes directly related to improving overall customer service within each business unit, the Corporate
Board expects the Target Architecture to produce an additional saving of at least 30% over current operating costs through energy efficiency initiatives, virtualization of servers and workstations, and expanded telecommuting and desk-sharing. This Green initiative is intended to become a model for future investments at all company facilities worldwide.
Refer to Global Mobile scenario
You have been engaged as a consultant to advise the Chief Architect on the best ways to approach to the implementation planning activities for this significant business transformation.
Based on TOGAF 9, which of the following is the best answer? (Is this the right answers to choose?)
A. You recommend using conventional implementation planning techniques. The horizontal scope of the
Green initiative would make the Capability-Based Planning approach used in the organization's
TOGAF-based Enterprise Architecture framework difficult to manage and govern. This approach to planning was better applied within the vertical scope of a business unit.
B. You recommend that the implementation planning activities be conducted using Capability-Based
Planning. This is appropriate because the Green initiative is an enterprise-wide plan with a horizontal scope. Its metrics are aggregated at the enterprise level. It is crucial to gain business unit support and cooperation to achieve the broader business outcomes which will benefit all.
C. The Capability-Based Planning approach used in the organization's TOGAF-based Enterprise
Architecture framework is focused on business outcomes. The Green initiative is an infrastructure program that is technical in nature; therefore, it would not be appropriate to use the Capability-Based
Planning approach. Instead, the Global Mobile systems development lifecycle approach should be utilized to develop the Solution Architecture.
D. You recommend using conventional implementation planning techniques. The Capability-Based
Planning approach is normally only used in public sector, defense-related programs. This approach is not appropriate for a private sector company.
Answer: B
QUESTION NO: 2
Scenario: AGEX Inc.
Please read this scenario prior to answering the question
AGEX is a large, global commodities trading company which has been growing rapidly through a series of acquisitions.
Each new business is performing well in its markets. However, the lack of integration between headquarters and the business units has increasingly caused problems in the handling of customer and financial information. The inability to share information across businesses has resulted in lost opportunities to "leverage the synergies" that had been intended when the businesses were acquired. At present, each business unit maintains its own applications. Despite an earlier initiative to install a common application to manage customer, products, supplier, and inventory information, each business unit has different ways of defining each of these core elements and has customized the common application to the point where the ability to exchange information is difficult, costly, and error-prone.
As a result, AGEX has begun implementing a single Enterprise Resource Planning (ERP) system to consolidate information from several applications that exist across the lines of business. The Corporate
Board is concerned that the new ERP system must be able to manage and safeguard customer information in a manner that meets or exceeds the legal requirements of the countries in which the company operates. This will be an increasingly important capability as the company expands its online services offered to clients and trading partners.
The CIO has formed an Enterprise Architecture department, and one of the primary goals in its charter is to coordinate efforts between the ERP implementation team and the business unit personnel who will be involved in the migration process. The CIO has also formed a cross-functional Architecture Review Board to oversee and govern the architecture.
After reviewing the available alternatives, and based on recommendations from the ERP vendor, AGEX has selected TOGAF 9 as the basis for its Enterprise Architecture program.
The CIO has endorsed this choice with the full support of top management.
Refer to the AGEX Inc. Scenario
You are serving as the Chief Architect.
You have been asked to recommend the approach to take in the Preliminary Phase to ensure that the
Corporate Board's concern is addressed.
Based en TOGAF 9, which of the following is the best answer?
A. You evaluate the implications of the Board's concern in terms of regulatory and security policy requirements. You then update the AGEX security policy to reflect the concern, ensuring that this policy is communicated across the organization. You allocate a security architecture team to ensure that security considerations are included in ongoing architecture planning. You then assess the security implications and agreements within the AGEX businesses and their suppliers.
B. You evaluate the implications of the Board's concern in terms of regulatory requirements and their impact on business goals and objectives. Based on this understanding, you then issue a Request for
Architecture Work to commence an architecture development project to develop a solution that will address the Board's concern. You allocate a security architect to oversee the implementation of the solution in the ERP system that is being developed.
C. You start by clarifying the intent that the Board has for raising this concern. This enables you to understand the implications of the concern in terms of regulatory requirements and the potential impact on current business goals and objectives. You propose that a security architect or security architecture team be allocated to develop comprehensive security architecture.
D. You evaluate the implications of the Board's concern by examining the potential impacts on business goals and objectives. Based on your understanding, you then update the current AGEX security policy to include an emphasis on the Board's concern. In addition, you allocate a security architect to ensure that security considerations are included in the architecture planning for all domains.
Answer: A
QUESTION NO: 3
Scenario: Zephyr Enterprises
Please read this scenario prior to answering the question
Zephyr Enterprises specializes in the development of wind turbine blades for use in large-scale commercial wind energy production systems. Zephyr has manufacturing facilities located in Palm Springs,
California, Omaha, Nebraska, and Winnipeg, Ontario. Each of these plants supplies a different manufacturer that builds and sells complete systems. The turbine blades are custom engineered to meet each manufacturers design specifications.
Until recently, most turbine blades were fabricated manually using molded fiber-reinforced plastics.
However, recent improvements in composite materials, coupled with enhanced automated methods for precision application of materials during the molding process, have led to significant reduction in weight, increase in strength, and greatly improved blade longevity. Zephyr has pioneered the development of a proprietary automated process for continuous extrusion of the turbine blades. Patents have been filed to protect the process, but certain trade secrets must be closely guarded.
Zephyr has a mature Enterprise Architecture organization that is supported by a cross-functional
Architecture Review Board. The Chief Information Officer and the Chief Operating Officer cosponsor the
Enterprise Architecture program.
Zephyr has used TOGAF and its Architecture Development Method (ADM) to develop its automated manufacturing processes and systems that are used to design, manufacture, and test the blade assemblies. They have recently updated to TOGAF 9 and have adapted the Zephyr Enterprise
Architecture to closely follow the TOGAF 9 framework. All of Zephyrs IT architects have been trained and certified on TOGAF 9.Recently, an architecture project was completed that defined a standard approach for controlling the Automated Test System that is used at each plant to perform final quality assurance tests on each completed blade assembly. The Manufacturing Architecture Board approved the plan for immediate implementation at each plant.
An Architecture Contract was developed that detailed the work needed to implement and deploy the new
Automated Test System controller. The Chief Engineer, sponsor of the activity, has expressed concern that a uniform process be employed at each site to ensure consistency.
Refer to the Zephyr Enterprises Scenario
You are the Lead Architect for this activity.
You have been asked to recommend the best approach to adopt to address the Chief Engineer's concern.
Based on TOGAF 9, which of the following is the best answer?
A. You create an Architecture Contract to manage and govern the implementation and migration process.
If the contract is issued to an external party, you ensure that it is a fully enforceable legal contract. For internal development projects, you decide it is adequate to utilize a memorandum of understanding between the Manufacturing Architecture Board and the implementation organization. You recommend that if a deviation from the contract is detected, the Manufacturing Architecture Board should modify the
Architecture Contract to allow the implementation organization the ability to customize the process to meet their local needs. As a result, you then issue a new Request for Architecture Work to implement the modified Architecture Definition.
B. You create an Architecture Contract to manage and govern the implementation and migration process.
If the contract is issued to an external party, you ensure that it is a fully enforceable legal contract. For internal envelopment projects, you decide it is adequate to utilize a memorandum of understanding between the Manufacturing Architecture Board and the implementation organization. You recommend that if a deviation from the Architecture Contract is detected, the Manufacturing Architecture Board grant a dispensation to allow the implementation organization the ability to customize the process to meet their local needs.
C. You create an Architecture Contract to manage and govern the implementation and migration process.
If the contract is issued to an external party, you ensure that it is a fully enforceable legal contract. For internal development projects, you decide it is adequate to utilize amemorandum of understanding between the Manufacturing Architecture Board and the implementation organization. You ensure that the
Manufacturing Architecture Board reviews all deviations from the Architecture Contract, and considers whether or not to grant a dispensation to allow the implementation organization to customize the process to meet their local needs.
D. You create an Architecture Contract to govern the implementation and migration process at each site. If the contract is issued to an external party, you ensure that it is a fully enforceable legal contract. You ensure that the contract addresses the project objectives, effectiveness metrics, acceptance criteria, and risk management. You then schedule compliance reviews at key points in the implementation process to ensure that the work is proceeding in accordance with the Architecture Definition. Based on the results, you ensure that the Manufacturing Architecture Board reviews all deviations from the Architecture
Contract, and considers whether or not to grant a dispensation to allow the implementation organization to customize the process to meet their local needs.
Answer: C
QUESTION NO: 4
Scenario: Rollins Manufacturing
Please read this scenario prior to answering the question
Rollins Manufacturing is a major supplier in the automotive industry, headquartered in Cleveland, Ohio with manufacturing plants in Chicago, Sao Paulo, Stuttgart, Yokohama, and Seoul. Each of these plants has been operating its own Manufacturing Requirements Planning (MRPII) system, production scheduling, and custom developed applications that drive the automated production equipment at each plant.
Rollins is implementing lean manufacturing principles to minimize waste and improve the efficiency of all of its production operations. During a recent exercise held for internal quality improvement, it was determined that a significant reduction in process waste could be achieved by replacing the current MRPII and scheduling systems with a common Enterprise Resource Planning (ERP) system located in the
Cleveland data center. This central system would provide support to each of the plants replacing the functionality in the existing systems. It would also eliminate the need for full data centers at each of the plant facilities. A reduced number of IT staff could support the remaining applications. In some cases, a third-party contractor could provide those staff.
The Rollins Enterprise Architecture department has been operating for several years and has mature, well-developed architecture governance and development processes that are strongly based on TOGAF
9.At a recent meeting, the Architecture Review Board approved a Request for Architecture Work from the
Chief Engineer of Global Manufacturing Operations who is the project sponsor. The request covered the initial architectural investigations and the development of a comprehensive architecture to plan the transformation.
The Common ERP Deployment architecture project team has now been formed, and the project team has been asked to develop an Architecture Vision that will achieve the desired outcomes and benefits. Some of the plant managers have expressed concern about the security and reliability of driving their MRPII and production scheduling from a central system located in Cleveland. The Chief Engineer wants to know how these concerns can be addressed.
Refer to the Rollins Manufacturing Scenario:
You are serving as the Lead Enterprise Architect for the Common ERP Deployment architecture project.
One of the earliest initiatives in the Enterprise Architecture program at Rollins was the definition of a set of
IT principles and architecture principles that are well aligned with the overall enterprise principles. These now need to be updated to address the concerns raised.
You have been asked to select a set of principles most appropriate for guiding the team to define a robust solution.
[Note: You should assume that Rollins has adopted the example set of principles that are listed and defined in TOGAF 9, Section 23.6.]
Based on TOGAF 9, which of the following is the best answer?
A. Common-use Applications, Data is Shared, Data is Accessible, Data is Secure, Interoperability, Control
Technical Diversity.
B. Business Continuity, Service-orientation, Data is Accessible, Data is Secure, Responsive Change
Management.
C. Maximize Benefit to the Enterprise, Business Continuity, Common-use Applications, Data is Shared,
Data is Accessible, Data is Secure.
D. Information Management is Everybody's Business, IT Responsibility, Data Trustee, Technology
Independence, Responsive Change Management.
Answer: C
QUESTION NO: 5
Scenario: Vittronics Ltd.
Please read this scenario prior to answering the question
Vittronics Ltd. is a leading medical device manufacturer in the highly competitive market for Migraine
Headache Pain Management (MHPM) devices. These tiny wireless devices are implanted in the brain and can deliver a precise electric shock when the wearable Pain Control Unit (PCU) detects an increase in stress induced by the onset of a migraine headache.
This technology will be a breakthrough in the treatment of this condition, and several competitors are striving to be the first to introduce a product into the market. However, all of them must demonstrate the effectiveness and safety of their products in a set of clinical trials that will satisfy the regulatory requirements of the countries in the target markets.
The Enterprise Architecture group at Vittronics has been engaged in an architecture development project to create a Secure Private Immersive Collaborative Environment (SPICE) that will allow researchers at its product development laboratories worldwide to share information about their independent clinical trials.
The Vittronics Enterprise Architecture group is a mature organization that has been utilizing TOGAF for several years. They have recently upgraded to TOGAF 9. The Vittronics Architecture Development
Method (VADM) is strictly based on the TOGAF 9 Architecture Development Method (ADM) with extensions required to support current good manufacturing practices and good laboratory practices in their target markets.
The SPICE project team has now completed the Business, Information Systems, and Technology
Architecture phases and has produced a complete set of deliverables for each phase. Due to the highly sensitive nature of the information that is managed in SPICE, special care was taken to ensure that each architecture domain included an examination of the security and privacy issues that are relevant for each domain. A corresponding SPICE Security Architecture has been defined.
The Executive Vice President for Clinical Research is the sponsor of the Enterprise Architecture activity.
Refer to the Vittronics Ltd Scenario:
You are serving as the Lead Architect for the SPICE project team.
As required by TOGAF, the SPICE project team res completed a Business Transformation Readiness
Assessment in Phase A (Architecture Vision). In that assessment, it was determined that there are risks associated with the adoption of the Immersive Collaborative Environment. Despite a clear expression of the vision and the business need for utilizing SPICE to accelerate the clinical trials, the researchers have been resisting the change because of concerns about safeguarding individually identifiable information about the subjects who were participating in the trials.
You have been asked to recommend how this situation be managed in the implementation planning phases.
Based on TOGAF 9, which of the following is the best answer?
A. You decide that in Phase E, the team creates an overall solutions strategy that can guide the Target
Architecture implementation and structure the Transition Architectures. You check that there is consensus before proceeding.
B. You decide to return to Phase A, where the team should brainstorm a technical solution that mitigates the residual risks presented by the privacy issue. Then, during Phase D, you will directthe team to develop an Architecture Building Block to manage the security risks. After that, the team should select
Solution Building Blocks that mitigate all of the identified risks and revise the Requirements Impact
Statement to reflect the changes to the high-level solutions strategy and migration plan.
C. You decide that in Phase E, the team review the Business Transformation Readiness Assessment and identify, classify, and mitigate the risks associated with the identified readiness factors. If the risks can be satisfactorily mitigated, then you would continue to define a high-level solutions strategy that includes the
Transition Architectures needed to make the change culturally and technically feasible.
D. You decide that in Phase E, the team determines an approach to implementing an overall strategic direction that will address and mitigate the risks identified.
Answer: B
여러분은 먼저 우리 Omgzlook사이트에서 제공되는The Open Group인증Huawei H12-711_V4.0시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다. Adobe AD0-E716 - 성공을 위해 길을 찾고 실패를 위해 구실을 찾지 않는다는 말이 있습니다. Omgzlook는 여러분이The Open Group APMG-International Better-Business-Cases-Practitioner인증시험을 통과할 수 잇도록 도와주는 사이트입니다. The Open Group인증 SAP C_TS414_2023덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다. HP HPE7-A02 - Omgzlook에서는 소프트웨어버전과 PDF버전 두가지버전으로 덤프를 제공해드립니다.PDF버전은 구매사이트에서 무료샘플을 다움받아 체험가능합니다.
Updated: May 27, 2022