JN0-643 Dumps - Juniper Enterprise Routing And Switching, Professional (JNCIP ENT)시험유형 - Omgzlook

Omgzlook의Juniper인증 JN0-643 Dumps 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. Omgzlook의 인지도는 업계에 널리 알려져 있습니다. Juniper인증 JN0-643 Dumps덤프로Juniper인증 JN0-643 Dumps시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. 시험에서 떨어지면 덤프비용전액환불해드립니다. Juniper 인증JN0-643 Dumps시험에 도전해보려고 하는데 공부할 내용이 너무 많아 스트레스를 받는 분들은 지금 보고계시는 공부자료는 책장에 다시 넣으시고Omgzlook의Juniper 인증JN0-643 Dumps덤프자료에 주목하세요. Juniper 인증JN0-643 Dumps시험출제경향을 퍼펙트하게 연구하여Omgzlook에서는Juniper 인증JN0-643 Dumps시험대비덤프를 출시하였습니다.

Juniper JN0-643 Dumps덤프를 다운받아 가장 쉬운 시험준비를 하여 한방에 패스가는것입니다.

Juniper JN0-643 - Enterprise Routing and Switching, Professional (JNCIP-ENT) Dumps 시험을 합격하여 자격증을 손에 넣는다면 취직 혹은 연봉인상 혹은 승진이나 이직에 확실한 가산점이 될것입니다. Omgzlook는 응시자에게 있어서 시간이 정말 소중하다는 것을 잘 알고 있으므로 Juniper JN0-643 시험정보덤프를 자주 업데이트 하고, 오래 되고 더 이상 사용 하지 않는 문제들은 바로 삭제해버리며 새로운 최신 문제들을 추가 합니다. 이는 응시자가 확실하고도 빠르게Juniper JN0-643 시험정보덤프를 마스터하고Juniper JN0-643 시험정보시험을 패스할수 있도록 하는 또 하나의 보장입니다.

많은 분들은Juniper JN0-643 Dumps인증시험이 아주 어려운 것은 알고 있습니다. 하지만 우리Omgzlook를 선택함으로Juniper JN0-643 Dumps인증시험은 그렇게 어렵지 않다는 것을 알게 될 것입니다. Pass4Tes의Juniper JN0-643 Dumps합습가이드는 시험의 예상문제부터 전면적이로 만들어진 아주 퍼펙트한 시험자료입니다.

Juniper JN0-643 Dumps - 또한 구매후 일년무료 업데이트버전을 바을수 있는 기회를 얻을수 있습니다.

Omgzlook는 많은 IT인사들이Juniper인증시험에 참가하고 완벽한JN0-643 Dumps인증시험자료로 응시하여 안전하게Juniper JN0-643 Dumps인증시험자격증 취득하게 하는 사이트입니다. Pass4Tes의 자료들은 모두 우리의 전문가들이 연구와 노력 하에 만들어진 것이며.그들은 자기만의 지식과 몇 년간의 연구 경험으로 퍼펙트하게 만들었습니다.우리 덤프들은 품질은 보장하며 갱신 또한 아주 빠릅니다.우리의 덤프는 모두 실제시험과 유사하거나 혹은 같은 문제들임을 약속합니다.Omgzlook는 100% 한번에 꼭 고난의도인Juniper인증JN0-643 Dumps시험을 패스하여 여러분의 사업에 많은 도움을 드리겠습니다.

Omgzlook에서 제공하는 제품들은 품질이 아주 좋으며 또 업뎃속도도 아주 빠릅니다 만약 우리가제공하는Juniper JN0-643 Dumps인증시험관련 덤프를 구매하신다면Juniper JN0-643 Dumps시험은 손쉽게 성공적으로 패스하실 수 있습니다.

JN0-643 PDF DEMO:

QUESTION NO: 1
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
A. Traffic destined for R2 will be blackholed.
B. Transit traffic will follow the R1-R2-R4 path.
C. Traffic destined for R2 will reach R2.
D. Transit traffic will follow the R1-R3-R4 path.
Answer: C,D

QUESTION NO: 2
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
A customer is trying to configure a router to peer using EBGP to a neighbor. As shown in the exhibit, two links are being used for this configuration. The goal of this configuration is to load-balance traffic across both EBGP links.
Which configuration accomplishes this goal?
A. {master:0}[edit]
user@router# show protocols bgp
group External {
multihop;
local-address 192.168.2.1;
peer-as 65532;
neighbor 10.10.2.2;
neighbor 10.20.2.2;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop 192.168.2.1;
}
autonomous-system 65432;
B. {master:0}[edit]
user@router# show protocols bgp
group External {
multihop;
local-address 192.168.2.1;
peer-as 65532;
neighbor 192.168.5.1;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop [ 10.10.2.2 10.20.2.2 ];
}
autonomous-system 65432;
forwarding-table {
export load-balance;
}
{master:0}[edit]
user@router# show policy-options policy-statement load-balance
term balance {
then {
load-balance per-packet;
accept;
}
}
C. {master:0}[edit]
user@router# show protocols bgp
group External {
multi-path;
local-address 192.168.2.1;
peer-as 65532;
neighbor 192.168.5.1;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop [ 10.10.2.2 10.20.2.2 ];
}
autonomous-system 65432;
D. {master:0}[edit]
user@router# show protocols bgp
group External {
multipath;
local-address 192.168.2.1;
peer-as 65532;
neighbor 10.10.2.2;
neighbor 10.20.2.2;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop 192.168.2.1;
}
autonomous-system 65432;
Answer: B

QUESTION NO: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, Host2 is the only host currently joining group 231.1.1.1, but S1 is still flooding the traffic to all hosts on VLAN 100.
What feature can be configured on S1 to limit the multicast flooding of traffic to only interested hosts on VLAN 100?
A. Multicast scoping
B. IGMP snooping
C. Multicast VLAN registration
D. IGMP immediate leave
Answer: B

QUESTION NO: 4
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, the provider bridges are using Q-in-Q tunneling to tunnel VLAN 100 traffic over VLAN
200.
What is the correct VLAN configuration for Q-in-Q tunneling on Provider Bridge A?
A. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
B. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
C. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/10.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
D. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 100;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 200;
}
}
}
Answer: A

QUESTION NO: 5
-- Exhibit --
user@router> show class-of-service scheduler-map two
Scheduler map: two, Index: 56974
Scheduler: sch-best-effort, Forwarding class: best-effort, Index: 26057
Transmit ratE. 1 percent, Rate Limit: exact, Buffer sizE. remainder,
Buffer Limit: exact, Priority: low
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
Scheduler: sch-expedited-forwarding, Forwarding class:
expedited-forwarding, Index: 10026
Transmit ratE. 1 percent, Rate Limit: none, Buffer sizE. 1 percent,
Buffer Limit: none, Priority: high
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
user@router> show interfaces ge-0/0/1 extensive | find "CoS Information"
CoS information:
Direction : Output
CoS transmit queue Bandwidth Buffer
Priority Limit
% bps % usec
0 best-effort 1 10000000 r 0
low exact
1 expedited-forwarding 1 10000000 1 0
high none
Logical interface ge-0/0/1.823 (Index 74) (SNMP ifIndex 506) (Generation 139)
Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.823 ] Encapsulation: ENET2
Traffic statistics:
Input bytes : 1820224529
Output bytes : 6505980
Input packets: 1436371
Output packets: 75905
(... output truncated ...)
user@router> show interfaces ge-0/0/1 extensive | find "Queue Counters"
Queue counters: Queued packets Transmitted packets Dropped packets
0 best-effort 1343970 1343970 7105
1 expedited-fo 53987 53987
0
2 assured-forw 0 0
0
3 network-cont 0 0
0
Queue number: Mapped forwarding classes
0 best-effort
1 expedited-forwarding
2 assured-forwarding
3 network-control
Active alarms : None
Active defects : None
(... output truncated ...)
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the
SRX Series platform?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C

Omgzlook에서 제공되는Juniper Microsoft AI-102인증시험덤프의 문제와 답은 실제시험의 문제와 답과 아주 유사합니다. 만약Juniper인증Cisco 700-245시험에서 떨어지셨다고 하면 우리는 덤프비용전액 환불입니다. Omgzlook에서 출시한 Juniper인증IBM C1000-127 덤프는 시험문제점유율이 가장 높은 시험대비자료입니다. 하지만 우리Omgzlook에서는 20시간 좌우만 투자하면 무조건Juniper Fortinet FCP_FAZ_AD-7.4시험을 패스할 수 있도록 도와드립니다. Omgzlook의 Juniper인증 SAP C-THR87-2405덤프는 거의 모든 실제시험문제 범위를 커버하고 있습니다.Juniper인증 SAP C-THR87-2405시험덤프를 구매하여 덤프문제로 시험에서 불합격성적표를 받을시Omgzlook에서는 덤프비용 전액 환불을 약속드립니다.

Updated: May 28, 2022