Omgzlook의Cisco인증 350-401학습자료 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. Omgzlook의 인지도는 업계에 널리 알려져 있습니다. Cisco인증 350-401학습자료덤프로Cisco인증 350-401학습자료시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. 시험에서 떨어지면 덤프비용전액환불해드립니다. Cisco 인증350-401학습자료시험에 도전해보려고 하는데 공부할 내용이 너무 많아 스트레스를 받는 분들은 지금 보고계시는 공부자료는 책장에 다시 넣으시고Omgzlook의Cisco 인증350-401학습자료덤프자료에 주목하세요. Cisco 인증350-401학습자료시험출제경향을 퍼펙트하게 연구하여Omgzlook에서는Cisco 인증350-401학습자료시험대비덤프를 출시하였습니다.
Cisco 350-401학습자료덤프를 다운받아 가장 쉬운 시험준비를 하여 한방에 패스가는것입니다.
Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)학습자료 시험을 합격하여 자격증을 손에 넣는다면 취직 혹은 연봉인상 혹은 승진이나 이직에 확실한 가산점이 될것입니다. Omgzlook는 응시자에게 있어서 시간이 정말 소중하다는 것을 잘 알고 있으므로 Cisco 350-401 시험대비덤프를 자주 업데이트 하고, 오래 되고 더 이상 사용 하지 않는 문제들은 바로 삭제해버리며 새로운 최신 문제들을 추가 합니다. 이는 응시자가 확실하고도 빠르게Cisco 350-401 시험대비덤프를 마스터하고Cisco 350-401 시험대비시험을 패스할수 있도록 하는 또 하나의 보장입니다.
많은 분들은Cisco 350-401학습자료인증시험이 아주 어려운 것은 알고 있습니다. 하지만 우리Omgzlook를 선택함으로Cisco 350-401학습자료인증시험은 그렇게 어렵지 않다는 것을 알게 될 것입니다. Pass4Tes의Cisco 350-401학습자료합습가이드는 시험의 예상문제부터 전면적이로 만들어진 아주 퍼펙트한 시험자료입니다.
우리 자료로 여러분은 충분히Cisco Cisco 350-401학습자료를 패스할 수 있습니다.
Omgzlook는 많은 IT인사들이Cisco인증시험에 참가하고 완벽한350-401학습자료인증시험자료로 응시하여 안전하게Cisco 350-401학습자료인증시험자격증 취득하게 하는 사이트입니다. Pass4Tes의 자료들은 모두 우리의 전문가들이 연구와 노력 하에 만들어진 것이며.그들은 자기만의 지식과 몇 년간의 연구 경험으로 퍼펙트하게 만들었습니다.우리 덤프들은 품질은 보장하며 갱신 또한 아주 빠릅니다.우리의 덤프는 모두 실제시험과 유사하거나 혹은 같은 문제들임을 약속합니다.Omgzlook는 100% 한번에 꼭 고난의도인Cisco인증350-401학습자료시험을 패스하여 여러분의 사업에 많은 도움을 드리겠습니다.
Omgzlook에서 제공하는 제품들은 품질이 아주 좋으며 또 업뎃속도도 아주 빠릅니다 만약 우리가제공하는Cisco 350-401학습자료인증시험관련 덤프를 구매하신다면Cisco 350-401학습자료시험은 손쉽게 성공적으로 패스하실 수 있습니다.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Omgzlook에서 제공되는Cisco SAP C_ARSCC_2404인증시험덤프의 문제와 답은 실제시험의 문제와 답과 아주 유사합니다. 만약Cisco인증Fortinet NSE6_WCS-7.0시험에서 떨어지셨다고 하면 우리는 덤프비용전액 환불입니다. Omgzlook에서 출시한 Cisco인증Microsoft AZ-400 덤프는 시험문제점유율이 가장 높은 시험대비자료입니다. 하지만 우리Omgzlook에서는 20시간 좌우만 투자하면 무조건Cisco Huawei H13-311_V3.5시험을 패스할 수 있도록 도와드립니다. Omgzlook의 Cisco인증 Salesforce Marketing-Cloud-Email-Specialist덤프는 거의 모든 실제시험문제 범위를 커버하고 있습니다.Cisco인증 Salesforce Marketing-Cloud-Email-Specialist시험덤프를 구매하여 덤프문제로 시험에서 불합격성적표를 받을시Omgzlook에서는 덤프비용 전액 환불을 약속드립니다.
Updated: May 28, 2022