Oracle 1z0-070 Vce인증시험에 응시하고 싶으시다면 좋은 학습자료와 학습 가이드가 필요합니다.Oracle 1z0-070 Vce시험은 it업계에서도 아주 중요한 인증입니다. 시험패스를 원하신다면 충분한 시험준비는 필수입니다. Oracle인증1z0-070 Vce시험을 패스하여 자격증을 취득한다면 여러분의 미래에 많은 도움이 될 것입니다.Oracle인증1z0-070 Vce시험자격증은 it업계에서도 아주 인지도가 높고 또한 알아주는 시험이며 자격증 하나로도 취직은 문제없다고 볼만큼 가치가 있는 자격증이죠.Oracle인증1z0-070 Vce시험은 여러분이 it지식테스트시험입니다. 엘리트한 IT전문가들이 갖은 노력으로 연구제작한Oracle인증1z0-070 Vce덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있습니다.
Omgzlook에는Oracle 1z0-070 Vce인증시험의 특별한 합습가이드가 있습니다.
Oracle Exadata 1z0-070 Vce - Oracle Exadata X5 Administration IT업계에 금방 종사한 분은 자격증을 많이 취득하여 자신만의 가치를 업그레이드할수 있습니다. Oracle 인증1z0-070 시험응시덤프 무료샘플을 다운받아 체험해보세요. Omgzlook에서는 소프트웨어버전과 PDF버전 두가지버전으로 덤프를 제공해드립니다.PDF버전은 구매사이트에서 무료샘플을 다움받아 체험가능합니다.
Oracle인증 1z0-070 Vce덤프는 수많은 덤프중의 한과목입니다. 다른 덤프들과 같이Oracle인증 1z0-070 Vce덤프 적중율과 패스율은 100% 보장해드립니다. Oracle인증 1z0-070 Vce시험에 도전하려는 분들은Omgzlook 의Oracle인증 1z0-070 Vce덤프로 시험을 준비할것이죠?
Oracle 1z0-070 Vce - 공부하는 시간도 적어지고 다른 공부자료에 투자하는 돈도 줄어듭니다.
취직을 원하시나요? 승진을 원하시나요? 연봉인상을 원하시나요? 무엇을 원하시든 국제적으로 인정받은 IT인증자격증을 취득하는것이 길입니다. Oracle인증 1z0-070 Vce시험은 널리 인정받는 인기자격증의 시험과목입니다. Oracle인증 1z0-070 Vce시험을 패스하여 자격증을 취득하면 소원이 이루어집니다. Omgzlook의Oracle인증 1z0-070 Vce덤프는 시험패스율이 높아Oracle인증 1z0-070 Vce시험준비에 딱 좋은 공부자료입니다. Omgzlook에서 덤프를 마련하여 자격증취득에 도전하여 인생을 바꿔보세요.
Oracle인증 1z0-070 Vce시험을 패스하여 자격증을 취득하시면 찬란한 미래가 찾아올것입니다. Oracle인증 1z0-070 Vce인증시험을 패스하여 취득한 자격증은 IT인사로서의 능력을 증명해주며 IT업계에 종사하는 일원으로서의 자존심입니다.
1z0-070 PDF DEMO:
QUESTION NO: 1
You issued these commands to all Exadata Storage Servers in an X6 Exadata Database
Machine using dcli:
alter iormplan objective = low_latency
alter iormplan active
There are no database or category plans defined.
You are encountering disk I/O performance problems at certain times, which vary by day and week.
DSS and Batch workloads perform well some of the time.
Further investigation shows that at times, the workloads are all OLTP I/Os, at other times all batch
I/Os, and sometimes a bit of each.
You wish to have disk I/O managed so that performance will be optimized for all workloads.
Which statements would you issue to all Exadata Storage Servers to achieve this?
A. alter iormplan objective=auto
B. alter iormplan objective=high_throughput
C. alter iormplan objective=' '
D. alter iormplan objective=low_latency
E. alter iormplan objective=balanced
Answer: A
Explanation:
The supported IORM objectives are auto, low_latency, balanced, and high_throughput. The recommended objective option is auto which allows IORM to continuously monitor the workloads, and select the best mode based on the active workloads currently on the cells.
References:
http://docs.oracle.com/cd/E80920_01/SAGUG/exadata-storage-server-iorm.htm
QUESTION NO: 2
Which two statements are true about data paths used during RMAN backup and restore operations when media management servers use InfiniBand to connect to an X5 Database Machine?
A. During backups, data blocks are read by cellsrv and sent directly to the media manager to be written to media.
B. During backups, data blocks are read by cellsrv and sent to a database server, which sends the blocks to the media manager to be written to media.
C. During backups, data blocks are always read from Smart Flash Cache by cellsrv.
D. During restores, data blocks read from the media are sent to a database server that sends the blocks to cellsrv to be written.
E. During restores, data blocks read from the media are sent directly to cellsrv to be written.
Answer: A,E
Explanation:
The fastest database backup is achieved via InfiniBand.
RMAN does not back up directly to tape. However, it will integrate with media management software such as Oracle Secure Backup and utilize their capabilities to manage tape libraries.
Exadata Database Machine: The Database Machine contains the databases that need to be backed up. Oracle RMAN is the only mechanism to back up the databases that utilize Exadata Storage Servers as the storage. RMAN processes run on the database servers and interact with the Oracle Secure
Backup (OSB) agent, which further interacts with the media management software and enables
RMAN to communicate with the tape library.
References:
http://apprize.info/data/oracle_4/6.html
QUESTION NO: 3
Which two completely prevent a Smart Scan from occurring?
A. performing a minimum or maximum function on an indexed column
B. querying a table containing a JSON column
C. referencing more than 255 columns form an OLTP compressed table in a query
D. performing a Fast Full Index scan on a reverse key index
E. querying a table containing many migrated rows
F. querying a table containing many chained rows
Answer: C,E
Explanation:
B: Migrated Rows is a special case of chained rows. Migrated rows still affect performance, as they do in conventional storage situations, but with the additional overhead of reducing the beneficial effects of "Smart Scan" in addition to increasing the number of I/Os E: Smart Scans - broadly speaking and ignoring edge cases - can only transport a maximum of 254 columns from a single (non-HCC) segment.
Requesting more columns will simply disable Smart Scans for that segment.
An interesting limitation to Exadata Smart Scans - if more than 254 columns from a table (not HCC compressed, more on that in moment) need to be projected, Smart Scans for that particular segment will be disabled and Exadata will fall back to conventional I/O. This means that the number of columns in the projection clause can make a significant difference to performance, since only Smart
Scans allow taking advantage of offloading and particularly avoiding I/O via Storage Indexes.
QUESTION NO: 4
Which three statements are true about bulk data loading capabilities in an X5 Database
Machine environment?
A. DBFS may be used if Exadata-based shared storage is required to stage data before bulk loading into a database.
B. DBFS must use the DBFS_DG diskgroup for any DBFS store.
C. DBFS must be used to bulk load data into a production database on the Database Machine.
D. DBFS must be used to have a POSIX-compliant shared storage solution that is accessible from the database servers on a Database Machine.
E. ACFS may use the DBFS_DG diskgroup to contain the ADVM volume file.
F. ACFS may be used if Exadata-based shared storage is required to stage data before bulk loading into a database.
G. ACFS must be used to have a POSIX-compliant shared storage solution that is accessible from the database servers on a Database Machine.
Answer: A,C,D
Explanation:
External tables on DBFS file-systems provide the probably the most high-performance way to bulk load data into your database.
Bulk Data Loading
Describe the various options for staging data to be bulk loading into Database Machine Configure the
Database File System (DBFS) feature for staging input data files Use external tables based on input data files stored in DBFS to perform high-performance data loads
QUESTION NO: 5
Which three statements are true about Recovery Manager (RMAN) daily differential incremental backup strategies on an X5 Database Machine for a database having 25% or more of its blocks modified each day and which has an 8 k block size?
A. For level-0 backups, Block Change Tracking (BCT) is most beneficial when more than 25 percent of the blocks have changed since the last backup.
B. cellsrv returns only blocks that have changed since the last backup.
C. Enabling Block Change Tracking (BCT) on the database can result in a reduction of physical I/O on the cells during incremental backups.
D. For level-1 backups, Block Change Tracking (BCT) is most beneficial when more than 25 percent of the blocks have changed since the last backup.
E. Fast incremental backups when 50% or more of the blocks have changed since the last backup, will run as slowly as normal incremental backup.
F. Enabling Block Change Tracking (BCT) on the database can result in reduced consumption of storage network bandwidth.
Answer: B,C,E
Explanation:
A: Fast Incremental backups is possible with Block change tracking, which is initially introduced from version 10.2 onwards, by this tool it's very useful to reduce the RMAN incremental backup duration.
If the changes are something around 20% then in this situation BCT helps a lot.
C: Exadata Storage Server offload capability combined with RMAN block change tracking will efficiently perform large I/Os at the storage-tier level, returning only individual changed blocks for incremental backups and increasing the backup performance of the system.
Note: Level 1 backup: A level 1 backup includes only those blocks that have been changed since the
"parent" backup was taken. Remember a parent backup may be either a level 0 or a level 1 backup.
Block change tracking allows indeed the highest benefit for databases where the changes are not so high, Level 0 backup: A level 0 incremental backup is physically identical to a full backup and it includes every data block in the file except empty blocks. The only difference is that the level 0 backup is recorded as an incremental backup in the RMAN repository, so it can be used as the parent for a level 1 backup.
References:
http://www.dba-oracle.com/t_rman_backup_types.htm
http://www.oracle.com/technetwork/database/availability/maa-tech-wp-sundbm-backup-11202-
183503.pdf
https://www.toadworld.com/platforms/oracle/w/wiki/11124.fast-incremental-backups-active-data- guard
Oracle인증 EC-COUNCIL EC0-349시험을 패스해야만 자격증 취득이 가능합니다. Huawei H19-338_V3.0 - 이렇게 착한 가격에 이정도 품질의 덤프자료는 찾기 힘들것입니다. Omgzlook에서 출시한 Oracle Cisco 820-605덤프만 있으면 학원다닐 필요없이 시험패스 가능합니다. Oracle Network Appliance NS0-604 시험을 한번에 합격할수 없을가봐 두려워 하고 계시나요? 이 글을 보고 계신 분이라면 링크를 클릭하여 저희 사이트를 방문해주세요. SAP C_S4CPR_2408 - 덤프는 pdf파일과 온라인서비스로 되어있는데 pdf버전은 출력가능하고 온라인버전은 휴대폰에서도 작동가능합니다.
Updated: May 28, 2022