Microsoft인증 070-741인기시험시험을 패스하여 자격증을 취득하시면 찬란한 미래가 찾아올것입니다. Microsoft인증 070-741인기시험인증시험을 패스하여 취득한 자격증은 IT인사로서의 능력을 증명해주며 IT업계에 종사하는 일원으로서의 자존심입니다. Omgzlook 의 Microsoft인증 070-741인기시험덤프는 시험패스에 초점을 맞추어 제일 간단한 방법으로 시험을 패스하도록 밀어주는 시험공부가이드입니다.구매전Microsoft인증 070-741인기시험무료샘플을 다운받아 적성에 맞는지 확인하고 구매할지 않할지 선택하시면 됩니다. Omgzlook에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이Microsoft인증070-741인기시험시험을 패스할 수 있을 자료 등을 만들었습니다, Omgzlook 에서는 일년무료 업뎃을 제공하며, Omgzlook 의 덤프들은 모두 높은 정확도를 자랑합니다. Omgzlook 선택함으로 여러분이Microsoft인증070-741인기시험시험에 대한 부담은 사라질 것입니다. Microsoft인증 070-741인기시험덤프로Microsoft인증 070-741인기시험시험을 준비하여 한방에 시험패하세요.
MCSA: Windows Server 2016 070-741 망설이지 마십시오.
Microsoft인증 070-741 - Networking with Windows Server 2016인기시험덤프는Microsoft인증 070-741 - Networking with Windows Server 2016인기시험최신 실제시험문제의 모든 시험문제를 커버하고 있어 덤프에 있는 내용만 공부하시면 아무런 걱정없이 시험에 도전할수 있습니다. Omgzlook연구한 전문Microsoft 070-741 시험내용인증시험을 겨냥한 덤프가 아주 많은 인기를 누리고 있습니다. Omgzlook제공되는 자료는 지식을 장악할 수 있는 반면 많은 경험도 쌓을 수 있습니다.
Omgzlook의 Microsoft 070-741인기시험덤프로 자격증 취득의 꿈을 이루어보세요. 힘든Microsoft 070-741인기시험시험패스도 간단하게! Omgzlook의 전문가들은Microsoft 070-741인기시험 최신시험문제를 연구하여 시험대비에 딱 맞는Microsoft 070-741인기시험덤프를 출시하였습니다.
Microsoft 070-741인기시험 - Omgzlook시험문제와 답이야 말로 퍼펙트한 자료이죠.
Microsoft 070-741인기시험인증은 아주 중요한 인증시험중의 하나입니다. Omgzlook의 베터랑의 전문가들이 오랜 풍부한 경험과 IT지식으로 만들어낸 IT관연인증시험 자격증자료들입니다. 이런 자료들은 여러분이Microsoft인증시험중의070-741인기시험시험을 안전하게 패스하도록 도와줍니다. Omgzlook에서 제공하는 덤프들은 모두 100%통과 율을 보장하며 그리고 일년무료 업뎃을 제공합니다
인기가 높은 만큼Microsoft 070-741인기시험시험을 패스하여 취득하게 되는 자격증의 가치가 높습니다. 이렇게 좋은 자격증을 취득하는데 있어서의 필수과목인Microsoft 070-741인기시험시험을 어떻게 하면 한번에 패스할수 있을가요? 그 비결은 바로Omgzlook의 Microsoft 070-741인기시험덤프를 주문하여 가장 빠른 시일내에 덤프를 마스터하여 시험을 패스하는것입니다.
070-741 PDF DEMO:
QUESTION NO: 1
You have three servers named Server1, Server2, and Server3 that run Windows Server 2016.
On all three servers, Windows Firewall is configured to allow ICMP traffic. Server2 has two network adapters named NIC1 and NIC2.
Your network is configured as shown in the exhibit. (Click the Exhibit button.)
The parameters for NIC2 on Server1 are shown in the following output.
Which ping request will result in a reply from the destination host?
A. From Server2, ping 192.168.15.1
B. From Server1, ping 172.16.0.1
C. From Server3, ping 192.168.15.1
D. From Server1, ping 172.16.0.35
Answer: A
QUESTION NO: 2
Your network contains an Active Directory forest named adatum.com. The forest contains a server named Server1. Server1 has the DFS Namespaces role service installed and is configured as shown in the following exhibit.
\\Server1.adatum.com\namespace1 has a folder target named Folder1. A user named User1 has Full
Control share and NTFS permissions to Folder1.
Folder1 contains a file named File1.doc. User1 has only Write NTFS permissions to File1.doc.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
QUESTION NO: 3
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets.
The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet.
You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
You need to create a zone to ensure that Server1 can resolve single-label names.
What should you name the zone on Server1?
A. NetBIOS
B. . (root)
C. GlobalNames
D. WINS
Answer: C
Explanation
https://technet.microsoft.com/en-us/library/cc816610(v=ws.10).aspx
QUESTION NO: 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are planning the deployment of DNS to a new network.
You have three internal DNS servers configured as shown in the following table.
The contos.com zone contains delegations for east.contoso.com, west.contoso.com, and south.contoso.com.
All the DNS servers use root hints.
You need to ensure that all the DNS servers can resolve the names of all the internal namespaces and internet hosts.
Solution: On Server2, you create a conditional forwarder for contoso.com and west.contoso.com. On
Server3, you create a conditional forwarder for contoso.com and east.contoso.com.
Does this meet the goal?
A. Yes
B. No
Answer: A
QUESTION NO: 5
You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.
Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.
You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.
What should you do?
A. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.
B. From Windows PowerShell on Server1, run Set-VmNetworkAdapter cmdlet.
C. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.
D. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
Answer: B
Explanation
References: https://www.techsupportpk.com/2017/01/nic-teaming-in-hyper-v-on-windows-server-
2016.html To prepare the guest VM1 to run NIC Teaming at guest level, you have to reconfigure
VM1's network adapter setting:-Get-VM VM1 | Set-VMNetworkAdapter -AllowTeaming On
https://technet.microsoft.com/en-us/itpro/powershell/windows/hyper-v/set-vmnetworkadapter
https://docs.microsoft.com/en-us/windows-server/networking/technologies/nic
-teaming/create-a-new-nic-team-in-a-vm
EMC D-NWG-DS-00 - Omgzlook의 문제와 답은 정확도 적중률이 아주 높습니다. Omgzlook는 고객님께서Microsoft Pegasystems PEGACPLSA23V1첫번째 시험에서 패스할수 있도록 최선을 다하고 있습니다. WGU Web-Development-Applications - 지금까지의 시험문제와 답과 시험문제분석 등입니다. EMC D-CSF-SC-23 - 때문에 많은 IT인증시험준비중인분들에세 많은 편리를 드릴수 있습니다.100%정확도 100%신뢰.여러분은 마음편히 응시하시면 됩니다. SASInstitute A00-470 - 시험패스를 원하신다면 충분한 시험준비는 필수입니다.
Updated: May 28, 2022