070-741공부자료 - Microsoft Networking With Windows Server 2016 It덤프 - Omgzlook

Omgzlook 에서는 Microsoft 070-741공부자료 시험에 대비한 고품질 Microsoft 070-741공부자료덤프를 제공해 드립니다. Microsoft 070-741공부자료덤프는 IT 업계 종사자들에 있어서 아주 중요한 인증시험이자 인기 자격증을 취득할수 있는 필수과목입니다. Microsoft 070-741공부자료시험을 합격하여 자격증을 취득하시면 취업하는데 가산점이 될수 있고 급여 인상이나 이직에도 많을 도움을 드릴수 있습니다. Microsoft 070-741공부자료인증은 아주 중요한 인증시험중의 하나입니다. Omgzlook의 베터랑의 전문가들이 오랜 풍부한 경험과 IT지식으로 만들어낸 IT관연인증시험 자격증자료들입니다. Omgzlook에서Microsoft 070-741공부자료시험덤프를 구입하시면 퍼펙트한 구매후 서비스를 제공해드립니다.

MCSA: Windows Server 2016 070-741 그리고 우리는 덤프를 구매 시 일년무료 업뎃을 제공합니다.

Paypal을 거쳐서 지불하면 저희측에서Microsoft 070-741 - Networking with Windows Server 2016공부자료덤프를 보내드리지 않을시 paypal에 환불신청하실수 있습니다. Omgzlook는Microsoft 070-741 인기시험인증시험의 촉매제 같은 사이트입니다.Microsoft 070-741 인기시험인증시험 관연 덤프가 우리Omgzlook에서 출시되었습니다. 여러분이Microsoft 070-741 인기시험인증시험으로 나 자신과 자기만의 뛰어난 지식 면을 증명하고 싶으시다면 우리 Omgzlook의Microsoft 070-741 인기시험덤프자료가 많은 도움이 될 것입니다.

다른 사이트에서도Microsoft 070-741공부자료인증시험관련 자료를 보셨다고 믿습니다.하지만 우리 Omgzlook의 자료는 차원이 다른 완벽한 자료입니다.100%통과 율은 물론Omgzlook을 선택으로 여러분의 직장생활에 더 낳은 개변을 가져다 드리며 ,또한Omgzlook를 선택으로 여러분은 이미 충분한 시험준비를 하였습니다.우리는 여러분이 한번에 통과하게 도와주고 또 일년무료 업데이트서비스도 드립니다.

Microsoft인증Microsoft 070-741공부자료시험패는Omgzlook제품으로 고고고!

Omgzlook 는 여러분의 it전문가 꿈을 이루어드리는 사이트 입다. Omgzlook는 여러분이 우리 자료로 관심 가는 인중시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. 아직도Microsoft 070-741공부자료인증시험으로 고민하시고 계십니까? Microsoft 070-741공부자료인증시험가이드를 사용하실 생각은 없나요? Omgzlook는 여러분에 편리를 드릴 수 잇습니다. Omgzlook의 자료는 시험대비최고의 덤프로 시험패스는 문제없습니다. Omgzlook의 각종인증시험자료는 모두기출문제와 같은 것으로 덤프보고 시험패스는 문제없습니다. Omgzlook의 퍼펙트한 덤프인 M crosoft070-741공부자료인증시험자료의 문제와 답만 열심히 공부하면 여러분은 완전 안전히Microsoft 070-741공부자료인증자격증을 취득하실 수 있습니다.

거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면Microsoft인증 070-741공부자료시험은 무조건 패스해야 합니다. 하지만Microsoft인증 070-741공부자료시험패스는 하늘에 별따기 만큼 어렵습니다.

070-741 PDF DEMO:

QUESTION NO: 1
You have three servers named Server1, Server2, and Server3 that run Windows Server 2016.
On all three servers, Windows Firewall is configured to allow ICMP traffic. Server2 has two network adapters named NIC1 and NIC2.
Your network is configured as shown in the exhibit. (Click the Exhibit button.)
The parameters for NIC2 on Server1 are shown in the following output.
Which ping request will result in a reply from the destination host?
A. From Server2, ping 192.168.15.1
B. From Server1, ping 172.16.0.1
C. From Server3, ping 192.168.15.1
D. From Server1, ping 172.16.0.35
Answer: A

QUESTION NO: 2
Your network contains an Active Directory forest named adatum.com. The forest contains a server named Server1. Server1 has the DFS Namespaces role service installed and is configured as shown in the following exhibit.
\\Server1.adatum.com\namespace1 has a folder target named Folder1. A user named User1 has Full
Control share and NTFS permissions to Folder1.
Folder1 contains a file named File1.doc. User1 has only Write NTFS permissions to File1.doc.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:

QUESTION NO: 3
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets.
The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet.
You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
You need to create a zone to ensure that Server1 can resolve single-label names.
What should you name the zone on Server1?
A. NetBIOS
B. . (root)
C. GlobalNames
D. WINS
Answer: C
Explanation
https://technet.microsoft.com/en-us/library/cc816610(v=ws.10).aspx

QUESTION NO: 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are planning the deployment of DNS to a new network.
You have three internal DNS servers configured as shown in the following table.
The contos.com zone contains delegations for east.contoso.com, west.contoso.com, and south.contoso.com.
All the DNS servers use root hints.
You need to ensure that all the DNS servers can resolve the names of all the internal namespaces and internet hosts.
Solution: On Server2, you create a conditional forwarder for contoso.com and west.contoso.com. On
Server3, you create a conditional forwarder for contoso.com and east.contoso.com.
Does this meet the goal?
A. Yes
B. No
Answer: A

QUESTION NO: 5
You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.
Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.
You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.
What should you do?
A. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.
B. From Windows PowerShell on Server1, run Set-VmNetworkAdapter cmdlet.
C. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.
D. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
Answer: B
Explanation
References: https://www.techsupportpk.com/2017/01/nic-teaming-in-hyper-v-on-windows-server-
2016.html To prepare the guest VM1 to run NIC Teaming at guest level, you have to reconfigure
VM1's network adapter setting:-Get-VM VM1 | Set-VMNetworkAdapter -AllowTeaming On
https://technet.microsoft.com/en-us/itpro/powershell/windows/hyper-v/set-vmnetworkadapter
https://docs.microsoft.com/en-us/windows-server/networking/technologies/nic
-teaming/create-a-new-nic-team-in-a-vm

여러분은 먼저 우리 Omgzlook사이트에서 제공되는Microsoft인증EMC D-VPX-OE-A-24시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다. ISQI CTAL-TTA_Syll19_4.0 - 성공을 위해 길을 찾고 실패를 위해 구실을 찾지 않는다는 말이 있습니다. Omgzlook는 여러분이Microsoft CompTIA 220-1102인증시험을 통과할 수 잇도록 도와주는 사이트입니다. Microsoft인증 SAP C_ARP2P_2404덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다. Salesforce ADM-201 - Omgzlook에서는 소프트웨어버전과 PDF버전 두가지버전으로 덤프를 제공해드립니다.PDF버전은 구매사이트에서 무료샘플을 다움받아 체험가능합니다.

Updated: May 28, 2022