자격증을 취득하여 직장에서 혹은 IT업계에서 자시만의 위치를 찾으련다면 자격증 취득이 필수입니다. Microsoft인증70-410 Dumps시험을 패스하고 싶은 분들은Omgzlook제품으로 가보세요. Microsoft인증70-410 Dumps시험은 국제적으로 승인해주는 IT인증시험의 한과목입니다. Omgzlook는 최고의 덤프만 제공합니다. 응시 전Microsoft 70-410 Dumps인증시험덤프로 최고의 시험대비준비를 하시기 바랍니다. Omgzlook의 Microsoft인증 70-410 Dumps덤프가 있으면 시험패스가 한결 간편해집니다.
Windows Server 2012 70-410 IT업계에 종사하는 분이 점점 많아지고 있는 지금 IT인증자격증은 필수품으로 되었습니다.
Windows Server 2012 70-410 Dumps - Installing and Configuring Windows Server 2012 저희는 수시로 덤프업데이트 가능성을 체크하여 덤프를 항상 시중에서 가장 최신버전이 될수있도록 최선을 다하고 있습니다. 경쟁율이 치열한 IT업계에서 아무런 목표없이 아무런 희망없이 무미건조한 생활을 하고 계시나요? 다른 사람들이 모두 취득하고 있는 자격증에 관심도 없는 분은 치열한 경쟁속에서 살아남기 어렵습니다. Microsoft인증 70-410 Dump시험패스가 힘들다한들Omgzlook덤프만 있으면 어려운 시험도 쉬워질수 밖에 없습니다.
Microsoft 70-410 Dumps 시험을 보시는 분이 점점 많아지고 있는데 하루빨리 다른 분들보다 Microsoft 70-410 Dumps시험을 패스하여 자격증을 취득하는 편이 좋지 않을가요? 자격증이 보편화되면 자격증의 가치도 그만큼 떨어지니깐요. Microsoft 70-410 Dumps덤프는 이미 많은분들의 시험패스로 검증된 믿을만한 최고의 시험자료입니다.
Microsoft 70-410 Dumps - IT인증자격증을 취득하려고 마음먹었으면 끝까지 도전해봐야 합니다.
Omgzlook는 여러분을 성공으로 가는 길에 도움을 드리는 사이트입니다. Omgzlook에서는 여러분이 안전하게 간단하게Microsoft인증70-410 Dumps시험을 패스할 수 있는 자료들을 제공함으로 빠른 시일 내에 IT관련지식을 터득하고 한번에 시험을 패스하실 수 있습니다.
데모도 pdf버전과 온라인버전으로 나뉘어져 있습니다.pdf버전과 온라인버전은 문제는 같은데 온라인버전은 pdf버전을 공부한후 실력테스트 가능한 프로그램입니다. Omgzlook에서 출시한 Microsoft 70-410 Dumps덤프만 있으면 학원다닐 필요없이 시험패스 가능합니다.
70-410 PDF DEMO:
QUESTION NO: 1
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: K
Explanation
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh831410.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V,
Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and
Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335
QUESTION NO: 2
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts several virtual machines. Each virtual machine has two network adapters. Server1 contains several virtual switches.
On Server1, you create a NIC team that has two network adapters.
You discover that the NIC team is set to Static Teaming mode.
You need to modify the NIC teaming mode to Switch Independent.
Which cmdlet should you use?
A. Set-VMNetworkAdapter
B. Set-NetLbfoTeam
C. Set-NetLbfoTeamNic
D. Set-VMSwitch
Answer: B
Explanation
The Set-NetLbfoTeam cmdlet sets the TeamingMode or LoadBalancingAlgorithm parameters on the specified NIC team.
Example: Set the teaming mode
This command sets the teaming mode of the team named Team1 to LACP.
Windows PowerShell
PS C:\> Set-NetLbfoTeam -Name Team1 -TeamingMode LACP
Reference: Set-NetLbfoTeam
https://technet.microsoft.com/en-us/library/jj130844(v=wps.630).aspx
QUESTION NO: 3
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.
Contoso.com has a Windows Server 2012 R2 domain controller, named ENSUREPASS-DC01, which has the Domain Naming master and the Schema master roles installed. Contoso.com also has a
Windows Server 2008 R2 domain controller, named ENSUREPASS-DC02, which has the PDC Emulator,
RID master, and Infrastructure master roles installed.
You have deployed a new Windows Server 2012 server, which belongs to a workgroup, in
Contoso.com's perimeter network.
You then executed the djoin.exe command.
Which of the following is the purpose of the djoin.exe command?
A. It sets up a computer account in a domain and requests an offline domain join when a computer restarts.
B. It sets up a user account in a domain and requests an online domain join when a computer restarts.
C. It sets up a computer account in a domain and requests an offline domain join immediately.
D. It sets up a computer account in a domain and requests an online domain join immediately.
Answer: A
QUESTION NO: 4
Your network contains one Active Directory domain named contoso.com. The domain contains
10 domain controllers and a read-only domain controller (RODC) named RODC01.
You plan to replace a domain controller named DC1. DC1 has the schema operations master role.
You need to transfer the schema master role to another domain controller named DC10 before you remove Active Directory from DC1.
Which tool should you use?
A. the ntdsutil command
B. the Set-ADDomain cmdlet
C. the Install-ADDSDomain cmdlet
D. the dsadd command
E. the dsamain command
F. the dsmgmt command
G. the net user command
H. the Set-ADForest cmdlet
Answer: A
Explanation
To transfer the schema master role using the command line:
* Open Command Prompt.
* Type:
ntdsutil
* At the ntdsutil command prompt, type:
roles
* At the fsmo maintenance command prompt, type:
connection
* At the server connections command prompt, type:
connect to serverDomainController
* At the server connections command prompt, type:
quit
* At the fsmo maintenance command prompt, type:
transfer schema master
Reference: Transfer the schema master role
QUESTION NO: 5
You have a server named Server1. Server1 runs Windows Server 2012 R2.
A user named Admin1 is a member of the local Administrators group.
You need to ensure that Admin1 receives a User Account Control (UAC) prompt when attempting to open Windows PowerShell as an administrator.
Which setting should you modify from the Local Group Policy Editor?
To answer, select the appropriate setting in the answer area.
Answer:
Explanation
Local Group Policy Editor is a Microsoft Management Console (MMC) snap-in that is used to configure and modify Group Policy settings within Group Policy Objects (GPOs).
Administrators need to be able to quickly modify Group Policy settings for multiple users and computers throughout a network environment. The Local Group Policy Editor provides administrators with a hierarchical tree structure for configuring Group Policy settings in GPOs. These GPOs can then be linked to sites, domains, and organizational units (OU) that contain computer or user objects.To work efficiently, administrators need to have immediate access to information about the function and purpose of individual policy settings. For Administrative Templates policy settings, Local Group
Policy Editor provides information about each policy setting directly in the web view of the console.
This information shows operating system requirements, defines the policy setting, and includes any specific details about the effect of enabling or disabling the policy setting.
Reference: http://technet.microsoft.com/en-us/library/dn265982.aspx
Microsoft인증SAP C-THR88-2405시험은 현재 치열한 IT경쟁 속에서 열기는 더욱더 뜨겁습니다. Microsoft Oracle 1z0-1047-24 덤프를 한번 믿고Microsoft Oracle 1z0-1047-24시험에 두려움없이 맞서보세요. SASInstitute A00-282 - 많은 애용 바랍니다. Microsoft VMware 5V0-31.23 시험 기출문제를 애타게 찾고 계시나요? Omgzlook의 Microsoft VMware 5V0-31.23덤프는Microsoft VMware 5V0-31.23최신 시험의 기출문제뿐만아니라 정답도 표기되어 있고 저희 전문가들의 예상문제도 포함되어있어 한방에 응시자분들의 고민을 해결해드립니다. Microsoft인증 Oracle 1z0-1047-24시험을 패스하려면 Omgzlook의Microsoft인증 Oracle 1z0-1047-24덤프로 시험준비공부를 하는게 제일 좋은 방법입니다.
Updated: May 28, 2022