Microsoft인증 70-347최신시험시험이 어려워 자격증 취득을 망설이는 분들이 많습니다. Omgzlook가 있으면 이런 걱정은 하지 않으셔도 됩니다. Omgzlook의Microsoft인증 70-347최신시험덤프로 시험을 한방에 통과하여 승진이나 연봉인상에 도움되는 자격증을 취득합시다. 하지만 저희는 수시로 Microsoft 70-347최신시험 시험문제 변경을 체크하여Microsoft 70-347최신시험덤프를 가장 최신버전으로 업데이트하도록 최선을 다하고 있습니다. Microsoft 70-347최신시험덤프를 구매하면 1년간 업데이트될떼마다 최신버전을 구매시 사용한 메일로 전송해드립니다. 높은 시험패스율을 자랑하고 있는Microsoft인증 70-347최신시험덤프는 여러분이 승진으로 향해 달리는 길에 날개를 펼쳐드립니다.자격증을 하루 빨리 취득하여 승진꿈을 이루세요.
Microsoft Office 365 70-347 가장 적은 투자로 가장 큰 득을 보실수 있습니다.
Omgzlook이 바로 아주 좋은Microsoft 70-347 - Enabling Office 365 Services최신시험인증시험덤프를 제공할 수 있는 사이트입니다. Omgzlook를 검색을 통해 클릭하게된 지금 이 순간 IT인증자격증취득Microsoft 70-347 덤프공부문제시험은 더는 힘든 일이 아닙니다. 다른 분들이Microsoft 70-347 덤프공부문제시험준비로 수없는 고민을 할때 고객님은 저희 Microsoft 70-347 덤프공부문제덤프로 제일 빠른 시일내에 시험을 패스하여 자격증을 손에 넣을수 있습니다.
Omgzlook는 IT인증관련덤프를 제공하는 최고의 업체입니다, 덤프들은 Omgzlook의 베터랑의 전문가들이 오랜 풍부한 경험과 IT지식으로 만들어낸 최고의 제품입니다. 그리고 우리는 온라인무료 서비스도 제공되어 제일 빠른 시간에 소통 상담이 가능합니다.
여러분의 편리하게Microsoft Microsoft 70-347최신시험응시하는데 많은 도움이 될 것입니다.
Omgzlook는 IT인증자격증을 취득하려는 IT업계 인사들의 검증으로 크나큰 인지도를 가지게 되었습니다. 믿고 애용해주신 분들께 감사의 인사를 드립니다. Microsoft 70-347최신시험덤프도 다른 과목 덤프자료처럼 적중율 좋고 통과율이 장난이 아닙니다. 덤프를 구매하시면 퍼펙트한 구매후 서비스까지 제공해드려 고객님이 보유한 덤프가 항상 시장에서 가장 최신버전임을 약속해드립니다. Microsoft 70-347최신시험덤프만 구매하신다면 자격증 취득이 쉬워져 고객님의 밝은 미래를 예약한것과 같습니다.
Microsoft인증70-347최신시험시험을 패스하여 자격증을 취득한다면 여러분의 미래에 많은 도움이 될 것입니다.Microsoft인증70-347최신시험시험자격증은 it업계에서도 아주 인지도가 높고 또한 알아주는 시험이며 자격증 하나로도 취직은 문제없다고 볼만큼 가치가 있는 자격증이죠.Microsoft인증70-347최신시험시험은 여러분이 it지식테스트시험입니다.
70-347 PDF DEMO:
QUESTION NO: 1
You manage an Office 365 tenant that uses an Enterprise E1 subscription. A user takes an extended leave of absence.
The user reports that email messages in the Junk Email folder are deleted before they can read the messages.
You need to ensure that email messages for the user's Junk Email folder are deleted after 60 days.
Which Windows PowerShell cmdlet should you run first?
A. Enable-JournalRule
B. Set-CsPrivacyConfiguration
C. Set-HostedContentFilterPolicy
D. Set-CsUser
E. New-RetentionPolicyTag
F. Set-MalwareFilterPolicy
G. Set-MailboxJunkEmailConfiguration
H. Start-ManagedFolderAssistant
Answer: E
Explanation
Use the New-RetentionPolicyTag cmdlet to create a retention tag. This cmdlet is available in on- premises Exchange Server 2016 and in the cloud-based service. It applies to Exchange Online and
Exchange Server
2016. Retention tags are used to apply message retention settings to folders and items in a mailbox.
Example: This example creates the retention policy tag Finance-DeletedItems for the Deleted Items default folder. When applied to a mailbox as a part of a retention policy, the tag permanently deletes items of all types in the Deleted Items folder in 60 days.
New-RetentionPolicyTag "Finance-DeletedItems" -Type DeletedItems -RetentionEnabled $true
-AgeLimitForRetention 60 -
References:
https://technet.microsoft.com/en-us/library/dd335226(v=exchg.160).aspx
QUESTION NO: 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
You plan to implement the new mobile device mailbox policy based on the technical requirement.
Which mobile device mailbox policy will apply to VPUser1, VPUSer2, and VPUser3? To answer, drag the appropriate mobile device mailbox policies to the correct users. Each mobile device mailbox policy may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation
Confusingly, the policy that Exchange Server 2010 and 2013 create automatically during setup is called
"Default". However the name "Default" is not the true indication of which policy is the default.
Instead it is the IsDefaultPolicy (for Exchange 2010) or IsDefault (for Exchange 2013) property that actually determines which one is the default policy.
ForVPUser1's mailbox we see that the ActiveSyncMailboxPolicyIsDefaulted property is set to True.
This means that if we change the default mobile device mailbox policy to a different policy, that change will also take effect for VPUser1.
VPUser2 is configured with a mobile device policy named Restricted. This means that if we change the default mobile device mailbox policy to a different policy, that change will not take effect for
VPUser2, and he will remain on the same policy.
VPUser3 is assigned to the "Default" policy again (see And also from scenario below), but the
ActiveSyncMailboxPolicyIsEnabled property is still set to False. This means that VPUser3 will remain configured with the policy named "Default" even if the default is changed to a different policy.
From the scenario:
Name: VPUser1
ActiveSyncMailboxPolicy: Default
ActiveSyncMailboxPolicyIsDefaulted: True
Name: VPUser2
ActiveSyncMailboxPolicy: Restricted
ActiveSyncMailboxPolicyIsDefaulted: False
Name: VPUser3
ActiveSyncMailboxPolicy: Default
ActiveSyncMailboxPolicyIsDefaulted: False
And also from scenario:
Contoso plans to introduce a new mobile device mailbox policy by running the New-
MobileDeviceMailboxPolicy-Name "Unrestricted"-PasswordEnabled
$true-AlphanumericPasswordRequirred $true- PasswordRecoveryEnabled $true-IsDefault
$true-AttachmentsEnabled $true-AllowStorageCard $true command.
References:
http://exchangeserverpro.com/exchange-server-configure-default-mobile-device-mailbox-policy- activesync/
QUESTION NO: 3
You need to define the steps required for a partner user to read encrypted email.
Which three steps must they perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation
References:
https://support.office.com/en-us/article/how-do-i-open-a-protected-message-1157a286-8ecc-4b1e- ac43-2a608fbf
QUESTION NO: 4
You are a Microsoft SharePoint administrator for Contoso, Ltd. Contoso recently purchased
Office 365 E3 licenses for all employees. You administer Office 365 by using the admin@contoso.com account. Contoso plans to migrate all legacy SharePoint sites to SharePoint Online.
The human resources department manager asks you to set up a SharePoint Online site collection that meets the requirements described in the following table.
You need to set up the site collection.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation
Box 1:
Box 2:
Box 3:
To administer Office 365 services using Windows PowerShell, you first need to open Windows
PowerShell (Step 1).
You then need to connect to the Office 365 service, in this case, SharePoint Online by running the
Connect-SPOService cmdlet and providing the SharePoint site URL and your administrative credentials (Step2).
To create a new SharePoint Online site collection using PowerShell, you run the New-SPOSite cmdlet
(Step
3). The URL, Owner and StorageQuote parameters are required. The ResourceQuota and Title parameters are optional. The CompatibilityLevel parameter is also optional. This question states that the compatibility level should be SharePoint 2013. As this parameter is not specified in the answer, the compatibility level will be set at the default setting. The default is SharePoint 2013.
References: https://technet.microsoft.com/en-us/library/fp161392
QUESTION NO: 5
You administer Microsoft Exchange Online for Fabrikam, Inc. Fabrikam's Exchange Online tenant domain name is fabrikam.onmicrosoft.com.
You verify the domain fabrikam.com in the Office 365 admin center and instruct other administrators to configure new Exchange Online users with fabrikam.com as the primary SMTP domain. The fabrikam.com domain is not federated.
A user reports that his reply-to address is displayed to external email message recipients as
User1@fabrikam.onmicrosoft.com.
You need to configure the user's mailbox to meet the following requirements:
* The user's reply-to address must be User1@fabrikam.com.
* The email address User1@fabrikam.onmicrosoft.com must function as a secondary email address for the user.
Which Windows PowerShell command should you run?
A. Set-Mailbox -Identity user1@fabrikam.onmicrosoft.com -ForwardingSmtpAddress user1@fabrikam.com
B. Set-Mailbox -Identity user1@fabrikam.onmicrosoft.com -SecondaryAddress user1@fabrikam.com
C. Set-Mailbox -Identity user1@fabrikam.onmicrosoft.com -EmailAddresses SMTP:
user1@fabrikam.com, user1@fabrikam.onmicrosoft.com
D. Set MsolUser -UserPrincipalName user1@fabrikam.onmicrosoft.com -AlternateEmailAddresses user1@fabrikam.com
Answer: C
Explanation
The EmailAddresses parameter, of the Set-Mailbox command, specifies all the email addresses (proxy addresses) for the recipient, including the primary SMTP address. In on-premises Exchange organizations, the primary SMTP address and other proxy addresses are typically set by email address policies.
Valid syntax for this parameter is [<Type>]:<emailaddress1>,[<Type>]:<emailaddress2>....The optional<Type> value specifies the type of email address. Some examples of valid values include:
If you don't include a <Type> value for an email address, the value smtp is assumed.
Omgzlook의 Microsoft인증 SAP C_S4FTR_2023덤프는 착한 가격에 고품질을 지닌 최고,최신의 버전입니다. 우리Omgzlook 의Microsoft Microsoft AZ-104인증시험덤프는 Omgzlook전문적으로Microsoft Microsoft AZ-104인증시험대비로 만들어진 최고의 자료입니다. Omgzlook의Microsoft인증 Palo Alto Networks PCNSA덤프는 시험패스율이 거의 100%에 달하여 많은 사랑을 받아왔습니다. IIA IIA-CIA-Part1 - 지금 같은 세대에 많은 분들이 IT업계에 관심을 가지고 있습니다. 우리 Omgzlook에서는 최고이자 최신의Microsoft 인증SAP P-S4FIN-2023덤프자료를 제공 함으로 여러분을 도와Microsoft 인증SAP P-S4FIN-2023인증자격증을 쉽게 취득할 수 있게 해드립니다.만약 아직도Microsoft 인증SAP P-S4FIN-2023시험패스를 위하여 고군분투하고 있다면 바로 우리 Omgzlook를 선택함으로 여러분의 고민을 날려버릴수 있습니다.
Updated: May 28, 2022