We always adhere to the principle of “mutual development and benefit”, and we believe our CTAL-TM_Syll2012 Exam Simulations practice materials can give you a timely and effective helping hand whenever you need in the process of learning our CTAL-TM_Syll2012 Exam Simulations study braindumps. For we have been in this career over ten years and we are good at tracing the changes of the CTAL-TM_Syll2012 Exam Simulations guide prep in time and update our exam dumps fast and accurately. With the pass rate high as 98% to 100%, you can totally rely on our CTAL-TM_Syll2012 Exam Simulations exam questions. As we all know it is not easy to obtain the CTAL-TM_Syll2012 Exam Simulations certification, and especially for those who cannot make full use of their sporadic time. Since our company’s establishment, we have devoted mass manpower, materials and financial resources into CTAL-TM_Syll2012 Exam Simulations exam materials and until now, we have a bold idea that we will definitely introduce our CTAL-TM_Syll2012 Exam Simulations study materials to the whole world and make all people that seek fortune and better opportunities have access to realize their life value.
ISQI Certifications CTAL-TM_Syll2012 You can totally rely on us!
CTAL-TM_Syll2012 - ISTQB Certified Tester Advanced Level - Test Manager [Syllabus 2012] Exam Simulations study engine is very attentive to provide a demo for all customers who concerned about our products, whose purpose is to allow customers to understand our product content before purchase. The download and install set no limits for the amount of the computers and the persons who use CTAL-TM_Syll2012 Latest Test Cost test prep. So we provide the best service for you as you can choose the most suitable learning methods to master the CTAL-TM_Syll2012 Latest Test Cost exam torrent.
If you have any questions after you buy our CTAL-TM_Syll2012 Exam Simulations study guide, you can always get thoughtful support and help by email or online inquiry. If you neeed any support, and we are aways here to help you. Our considerate service is not only reflected in the purchase process, but also reflected in the considerate after-sales assistance on our CTAL-TM_Syll2012 Exam Simulations exam questions.
ISQI CTAL-TM_Syll2012 Exam Simulations - You must be very surprised.
Our CTAL-TM_Syll2012 Exam Simulations exam quiz is unlike other exam materials that are available on the market, our CTAL-TM_Syll2012 Exam Simulations study dumps specially proposed different versions to allow you to learn not only on paper, but also to use mobile phones to learn. This greatly improves the students' availability of fragmented time. So you can achieve your CTAL-TM_Syll2012 Exam Simulations certification easily without disrupting your daily routine. And we will give you 100% success guaranteed on the CTAL-TM_Syll2012 Exam Simulations training guide.
In short, you will find the convenience and practicality of our CTAL-TM_Syll2012 Exam Simulations quiz guide in the process of learning. We will also continue to innovate and improve functions to provide you with better services.
CTAL-TM_Syll2012 PDF DEMO:
QUESTION NO: 1
Which of the following is an example of the test closure activity indicated as "lessons learned"?
K2 1 credit
A. Archive all the test results of the acceptance testing phase
B. Deliver a list of the open defects of a software product released into production to the service desk team
C. Participate in a meeting at the end of a project aimed at better managing the events and problems of future projects
D. Deliver an automated regression test suite, used during the system test phase of a software product released into production, to the team responsible for maintenance testing
Answer: C
QUESTION NO: 2
You are the Test Manager for a project to develop a client-server application that allows wine vendors to order custom-assorted packages of wines of several winemakers to sell special packages in their wine shops.
You decide to apply a blended risk-based and reactive testing strategy. Below the exit criteria for the system testinG. EXCR1- Each "critical" quality risk item must be covered by at least one test condition EXCR2- Each "critical" requirement must be covered by at least one test condition
The following are the "critical" requirements of the application:
REQ-SEL-1. The application shall allow the user to order only one package at a time
REQ-SEL-2. The application shall allow the user to select between four different packages (2bottles,
6-bottles, 12-bottles, 15-bottles)
REQ-SEL-3. The application shall allow the user to order a package containing at least 1 bottle and no more bottles than the package size. No error messages shall be displayed if the user selects a valid number of bottles (at least 1 bottle and no more than the package size)
REQ-SEL-4. The application shall display an error message "Invalid number of bottles" if an invalid number of bottles is selected by the user (zero bottles or a number higher than the package size)
REQ-PAY-1. The application shall allow the user to pay with the three accepted credit cards (Visa,
MasterCard, American Express)
REQ-PAY-2. The application shall display an error message "Invalid credit card" if invalid credit card data are given by the user
QUSTION NO: 11 The following is the unique "critical" quality risk item that has been identified:
CR-RSK-1. The GUI of the application might accept non-integer values for the input field designed to get the number of bottles from the user
Test analysis for system testing has just begun and the following test conditions have been identifieD.
TC-SEL-2. Test the selection of the package sizes
TC-SEL-4. Test wrong numbers of bottles for an order TC-CR-RSK-1. Test the accepted values from the input field designed to get the number of bottles from the user
Assume that you have used traceability to determine the logical test cases that cover all the requirements and the single risk item identified in that scenario.
Which of the following is a positive logical test that is complete and correct, and covers the
REQSEL-4 requirement?
K3 2 credits
A. Select a 6-bottles package, then try to insert 5 bottles; verify that no error messages are displayed
B. Select a 6-bottles package, then try to insert 7 bottles; verify that no error messages are displayed
C. Select a 6-bottles package, then try to insert 7 bottles; verify that the "Invalid number of bottles" message is displayed
D. Select a 6-bottles package, then try to insert 7 bottles
Answer: C
QUESTION NO: 3
The following are the exit criteria described in the test plan of a software product:
EX1. The test suite for the product must ensure that at least each quality risk item is covered by at least one test case (a quality risk item can be covered by more test cases).
EX2. All test cases in the test suite must be run during the execution phase.
EX3. Defects are classified into two categories: "C" (critical defect) and "NC" (non-critical defect). No known C defects shall exist in the product at the end of the test execution phase.
Which of the following information is useless when the specified exit criteria is evaluated?
K2 1 credit
A. A traceability matrix showing the relationships between the product risk items and the test cases
B. A list of all the open defects with the associated classification information extracted from the defect tracking system
C. A chart, showing the trend in the lag time from defect reporting to resolution, extracted from the defect tracking system
D. The execution status of all the test cases extracted from the test management tool
Answer: C
QUESTION NO: 4
Consider an information system of a Pay-Tv company based on a SOA architecture.
The integrated system currently consists of three core systems:
-a CRM (Customer Relationship Management) system
-a BRM (Billing and Revenue Management) system
-a CAS (Conditional Access System) system all of them communicating with SOA Middleware.
You have been asked to manage the testing activities for the integration of two additional off-theshelf systems from two different vendors: a SMS (Short Message Service) server and an IVR
(Interactive Voice Response) system.
Assume that there is a high likelihood that the two off-the-shelf systems will be low-quality and that you have a clear proof that the testing performed by the two vendors on their systems has been unsystematic and unprofessional. This obviously leads to higher quality risk for the overall integrated system.
You are the Test Manager of this project. Your main goal is to plan for testing activities to mitigate this risk.
Which of the following answers best describes the test activities (assuming it is possible to perform all of them) you should plan for?
K4 3 credits
A. You should plan for an informal and minimal acceptance test of the two off-the-shelf systems and then a single end-to-end test of the overall integrated system
B. You should directly plan for a single end-to-end test focused on end-to-end tests of the overall integrated system without an acceptance test of the two off-the-shelf systems
C. You should plan for two levels: a system integration test and an end-to-end test of the overall integrated system
D. You should plan for adequate re-testing of both the systems followed by a system integration test and an end-to-end test of the overall integrated system
Answer: D
QUESTION NO: 5
The following are the requirements identified as "critical":
REQ-SEL-001. The user shall be able to combine all the three products with all the four durations to define an item to purchase
REQ-SEL-002. The user shall be able to add a maximum of six different items to the shopping cart
REQ-PUR-001. The user shall be able to purchase all the items in the shopping cart using a credit voucher
REQ-PUR-002. The user shall be able to purchase all the items in the shopping cart using the available credit already charged on the smartcard
REQ-PUR-003. The user shall be able to purchase all the items in the shopping cart using all the accepted credit cards (Visa, MasterCard and Great Wall Card)
REG-LOGO-001. The user shall be able to logout (by clicking the logout button) from both the
"select" and "purchase" pages going back to the "browse" page (anonymous navigation)
Moreover the following quality risk item has been identified as "critical":
QR-P1. The web customer portal might not be able to provide the expected response time (less than
10 sec) for the purchase transactions under a load of up-to 1000 concurrent users
Test analysis for system testing has just begun and the following test conditions have been identifieD.
TC-SEL-01. Test the combinations of products and durations to define an item to purchase
TC-SEL-02. Test the maximum number of items, which can be added to the shopping cart
TC-PUR-01. Test the purchase of an item
TC-PUR-02. Test the purchase of an item with the credit charged on the smartcard
What is the MINIMUM number of test conditions that must be added to fulfill both the EXCR1 and
EXCR2 exit criteria?
K3 2 credits
A. 1
B. 2
C. 3
D. 4
Answer: C
We are convinced that our Salesforce Marketing-Cloud-Developer exam questions can help you gain the desired social status and thus embrace success. Fortinet FCP_WCS_AD-7.4 - Everybody knows that in every area, timing counts importantly. Therefore it is necessary to get a professional Huawei H20-421_V1.0 certification to pave the way for a better future. Our SAP C-S4FTR-2023 exam questions have been widely acclaimed among our customers, and the good reputation in industry prove that choosing our study materials would be the best way for you, and help you gain the SAP C-S4FTR-2023 certification successfully. Our PMI PMP-KR learning questions engage our working staff in understanding customers’ diverse and evolving expectations and incorporate that understanding into our strategies, thus you can 100% trust our PMI PMP-KR exam engine.
Updated: May 28, 2022