Passing the CTAL-TM_Syll2012 Braindumps Questions and obtaining the certificate may be the fastest and most direct way to change your position and achieve your goal. And we are just right here to give you help. Being considered the most authentic brand in this career, our professional experts are making unremitting efforts to provide our customers the latest and valid {CertName} exam simulation. After using our software, you will know that it is not too difficult to pass CTAL-TM_Syll2012 Braindumps Questions exam. You will find some exam techniques about how to pass CTAL-TM_Syll2012 Braindumps Questions exam from the exam materials and question-answer analysis provided by our Omgzlook. You can totally relay on us.
ISQI Certifications CTAL-TM_Syll2012 Now you can have these precious materials.
After nearly ten years' efforts, now our company have become the topnotch one in the field, therefore, if you want to pass the CTAL-TM_Syll2012 - ISTQB Certified Tester Advanced Level - Test Manager [Syllabus 2012] Braindumps Questions exam as well as getting the related certification at a great ease, I strongly believe that the CTAL-TM_Syll2012 - ISTQB Certified Tester Advanced Level - Test Manager [Syllabus 2012] Braindumps Questions study materials compiled by our company is your solid choice. If you want to be familiar with the real test and grasp the rhythm in the real test, you can choose our Valid Braindumps CTAL-TM_Syll2012 Ppt exam test engine to practice. Both our soft test engine and app test engine provide the exam scene simulation functions.
It is universally accepted that in this competitive society in order to get a good job we have no choice but to improve our own capacity and explore our potential constantly, and try our best to get the related CTAL-TM_Syll2012 Braindumps Questions certification is the best way to show our professional ability, however, the CTAL-TM_Syll2012 Braindumps Questions exam is hard nut to crack but our CTAL-TM_Syll2012 Braindumps Questions preparation questions are closely related to the exam, it is designed for you to systematize all of the key points needed for the CTAL-TM_Syll2012 Braindumps Questions exam.
ISQI CTAL-TM_Syll2012 Braindumps Questions - So they are dependable.
How you can gain the CTAL-TM_Syll2012 Braindumps Questions certification with ease in the least time? The answer is our CTAL-TM_Syll2012 Braindumps Questions study materials for we have engaged in this field for over ten years and we have become the professional standard over all the exam materials. You can free download the demos which are part of our CTAL-TM_Syll2012 Braindumps Questions exam braindumps, you will find that how good they are for our professionals devote of themselves on compiling and updating the most accurate content of our CTAL-TM_Syll2012 Braindumps Questions exam questions.
They have sublime devotion to their career just like you, and make progress ceaselessly. By keeping close eyes on the current changes in this filed, they make new updates of CTAL-TM_Syll2012 Braindumps Questions study guide constantly and when there is any new, we will keep you noticed to offer help more carefully.
CTAL-TM_Syll2012 PDF DEMO:
QUESTION NO: 1
Consider an information system of a Pay-Tv company based on a SOA architecture.
The integrated system currently consists of three core systems:
-a CRM (Customer Relationship Management) system
-a BRM (Billing and Revenue Management) system
-a CAS (Conditional Access System) system all of them communicating with SOA Middleware.
You have been asked to manage the testing activities for the integration of two additional off-theshelf systems from two different vendors: a SMS (Short Message Service) server and an IVR
(Interactive Voice Response) system.
Assume that there is a high likelihood that the two off-the-shelf systems will be low-quality and that you have a clear proof that the testing performed by the two vendors on their systems has been unsystematic and unprofessional. This obviously leads to higher quality risk for the overall integrated system.
You are the Test Manager of this project. Your main goal is to plan for testing activities to mitigate this risk.
Which of the following answers best describes the test activities (assuming it is possible to perform all of them) you should plan for?
K4 3 credits
A. You should plan for an informal and minimal acceptance test of the two off-the-shelf systems and then a single end-to-end test of the overall integrated system
B. You should directly plan for a single end-to-end test focused on end-to-end tests of the overall integrated system without an acceptance test of the two off-the-shelf systems
C. You should plan for two levels: a system integration test and an end-to-end test of the overall integrated system
D. You should plan for adequate re-testing of both the systems followed by a system integration test and an end-to-end test of the overall integrated system
Answer: D
QUESTION NO: 2
The following are the exit criteria described in the test plan of a software product:
EX1. The test suite for the product must ensure that at least each quality risk item is covered by at least one test case (a quality risk item can be covered by more test cases).
EX2. All test cases in the test suite must be run during the execution phase.
EX3. Defects are classified into two categories: "C" (critical defect) and "NC" (non-critical defect). No known C defects shall exist in the product at the end of the test execution phase.
Which of the following information is useless when the specified exit criteria is evaluated?
K2 1 credit
A. A traceability matrix showing the relationships between the product risk items and the test cases
B. A list of all the open defects with the associated classification information extracted from the defect tracking system
C. A chart, showing the trend in the lag time from defect reporting to resolution, extracted from the defect tracking system
D. The execution status of all the test cases extracted from the test management tool
Answer: C
QUESTION NO: 3
Assume you are the Test Manager for a new software release of an e-commerce application.
The server farm consists of six servers providing different capabilities. Each capability is provided through a set of web services.
The requirements specification document contains several SLAs
(Service Level Agreements) like the following:
SLA-001: 99.5 percent of all transactions shall have a response time less than five seconds under a load of up-to 5000 concurrent users
The main objective is to assure that all the SLAs specified in the requirements specification document will be met before system release. You decide to apply a risk-based testing strategy and an early risk analysis confirms that performance is high risk. You can count on a well-written requirements specification and on a model of the system behavior under various load levels produced by the system architect.
Which of the following test activities would you expect to be the less important ones to achieve the test objectives in this scenario?
K4 3 credits
A. Perform unit performance testing for each single web service
B. Monitor the SLAs after the system has been released into the production environment
C. Perform system performance testing, consisting of several performance testing sessions, to verify if all the SLAs have been met
D. Perform static performance testing by reviewing the architectural model of the system under various load levels
Answer: B
QUESTION NO: 4
Which of the following is an example of the test closure activity indicated as "lessons learned"?
K2 1 credit
A. Archive all the test results of the acceptance testing phase
B. Deliver a list of the open defects of a software product released into production to the service desk team
C. Participate in a meeting at the end of a project aimed at better managing the events and problems of future projects
D. Deliver an automated regression test suite, used during the system test phase of a software product released into production, to the team responsible for maintenance testing
Answer: C
QUESTION NO: 5
You are the Test Manager for a project to develop a client-server application that allows wine vendors to order custom-assorted packages of wines of several winemakers to sell special packages in their wine shops.
You decide to apply a blended risk-based and reactive testing strategy. Below the exit criteria for the system testinG. EXCR1- Each "critical" quality risk item must be covered by at least one test condition EXCR2- Each "critical" requirement must be covered by at least one test condition
The following are the "critical" requirements of the application:
REQ-SEL-1. The application shall allow the user to order only one package at a time
REQ-SEL-2. The application shall allow the user to select between four different packages (2bottles,
6-bottles, 12-bottles, 15-bottles)
REQ-SEL-3. The application shall allow the user to order a package containing at least 1 bottle and no more bottles than the package size. No error messages shall be displayed if the user selects a valid number of bottles (at least 1 bottle and no more than the package size)
REQ-SEL-4. The application shall display an error message "Invalid number of bottles" if an invalid number of bottles is selected by the user (zero bottles or a number higher than the package size)
REQ-PAY-1. The application shall allow the user to pay with the three accepted credit cards (Visa,
MasterCard, American Express)
REQ-PAY-2. The application shall display an error message "Invalid credit card" if invalid credit card data are given by the user
QUSTION NO: 11 The following is the unique "critical" quality risk item that has been identified:
CR-RSK-1. The GUI of the application might accept non-integer values for the input field designed to get the number of bottles from the user
Test analysis for system testing has just begun and the following test conditions have been identifieD.
TC-SEL-2. Test the selection of the package sizes
TC-SEL-4. Test wrong numbers of bottles for an order TC-CR-RSK-1. Test the accepted values from the input field designed to get the number of bottles from the user
Assume that you have used traceability to determine the logical test cases that cover all the requirements and the single risk item identified in that scenario.
Which of the following is a positive logical test that is complete and correct, and covers the
REQSEL-4 requirement?
K3 2 credits
A. Select a 6-bottles package, then try to insert 5 bottles; verify that no error messages are displayed
B. Select a 6-bottles package, then try to insert 7 bottles; verify that no error messages are displayed
C. Select a 6-bottles package, then try to insert 7 bottles; verify that the "Invalid number of bottles" message is displayed
D. Select a 6-bottles package, then try to insert 7 bottles
Answer: C
ITIL ITIL-DSV - Secondly you could look at the free demos to see if the questions and the answers are valuable. HP HPE0-G01 - So don’t hesitate to buy our {Examcode} study materials, we will give you the high-quality product and professional customer services. Our ACFE CFE practice engine can offer you the most professional guidance, which is helpful for your gaining the certificate. If you are not fortune enough to acquire the VMware 3V0-31.24 certification at once, you can unlimitedly use our product at different discounts until you reach your goal and let your dream comes true. And you can free download the demos of the IBM C1000-137 practice engine to have a experience before payment.
Updated: May 28, 2022