What is the measure of competence? Of course, most companies will judge your level according to the number of qualifications you have obtained. It may not be comprehensive, but passing the qualifying exam is a pretty straightforward way to hire an employer. Our 350-401 New Study Questions Free Download exam practice questions on the market this recruitment phenomenon, tailored for the user the fast pass the examination method of study, make the need to get a good job have enough leverage to compete with other candidates. The most advantage of the online version is that this version can support all electronica equipment. If you choose the online version of our 350-401 New Study Questions Free Download study materials, you can use our products by your any electronica equipment including computer, telephone, IPAD and so on. If you are not aware of your problem, please take a good look at the friends around you!
CCNP Enterprise 350-401 They compile each answer and question carefully.
Our Cisco certification 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) New Study Questions Free Download exam question bank is produced by Omgzlook's experts's continuously research of outline and previous exam. They tried their best to design the best 350-401 Valid Dumps Questions certification training dumps from our company for all people. By our study materials, all people can prepare for their 350-401 Valid Dumps Questions exam in the more efficient method.
We can let you spend a small amount of time and money and pass the IT certification exam at the same time. Selecting the products of Omgzlook to help you pass your first time Cisco certification 350-401 New Study Questions Free Download exam is very cost-effective. Omgzlook provide a good after-sales service for all customers.
Cisco 350-401 New Study Questions Free Download - Omgzlook can give you a brighter future.
Our company have the higher class operation system than other companies, so we can assure you that you can start to prepare for the 350-401 New Study Questions Free Download exam with our study materials in the shortest time. In addition, if you decide to buy 350-401 New Study Questions Free Download exam materials from our company, we can make sure that your benefits will far exceed the costs of you. The rate of return will be very obvious for you. We sincerely reassure all people on the 350-401 New Study Questions Free Download test question from our company and enjoy the benefits that our study materials bring. We believe that our study materials will have the ability to help all people pass their 350-401 New Study Questions Free Download exam and get the related exam in the near future.
Cisco 350-401 New Study Questions Free Download certification exam is a popular IT certification, and many people want to have it. With it you can secure your career.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Next, through my introduction, I hope you can have a deeper understanding of our EMC D-PSC-MN-01 learning quiz. Oracle 1z0-1127-24 - So you have to seize this opportunity of Omgzlook. OMG OMG-OCUP2-ADV300 - And you can free download the demo s to check it out. Salesforce Platform-App-Builder - The high quality exam dumps can produce a wonderful effect. APEGS NPPE - Details determine success or failure, so our every detail is strictly controlled.
Updated: May 28, 2022