So customer orientation is the beliefs we honor. Our SAP-C01 New Practice Questions Ppt practice materials from our company are invulnerable. And we are consigned as the most responsible company in this area. Our products’ contents cover the entire syllabus of the exam and refer to the past years’ exam papers. Our test bank provides all the questions which may appear in the real exam and all the important information about the exam. You can have a free try for downloading our SAP-C01 New Practice Questions Ppt exam demo before you buy our products.
AWS Certified Solutions Architect SAP-C01 You must be very surprised.
And we will give you 100% success guaranteed on the SAP-C01 - AWS Certified Solutions Architect - Professional New Practice Questions Ppt training guide. When you want to correct the answer after you finish learning, the correct answer for our New Exam SAP-C01 Guide Files test prep is below each question, and you can correct it based on the answer. In addition, we design small buttons, which can also show or hide the New Exam SAP-C01 Guide Files exam torrent, and you can flexibly and freely choose these two modes according to your habit.
Once you choose our learning materials, your dream that you have always been eager to get Amazon certification which can prove your abilities will realized. You will have more competitive advantages than others to find a job that is decent. We are convinced that our SAP-C01 New Practice Questions Ppt exam questions can help you gain the desired social status and thus embrace success.
Our Amazon SAP-C01 New Practice Questions Ppt exam questions are your best choice.
According to the survey, the average pass rate of our candidates has reached 99%. High passing rate must be the key factor for choosing, which is also one of the advantages of our SAP-C01 New Practice Questions Ppt real study dumps. Our SAP-C01 New Practice Questions Ppt exam questions have been widely acclaimed among our customers, and the good reputation in industry prove that choosing our study materials would be the best way for you, and help you gain the SAP-C01 New Practice Questions Ppt certification successfully. With about ten years’ research and development we still keep updating our SAP-C01 New Practice Questions Ppt prep guide, in order to grasp knowledge points in accordance with the exam, thus your study process would targeted and efficient.
And our professional SAP-C01 New Practice Questions Ppt study materials determine the high pass rate. According to the research statistics, we can confidently tell that 99% candidates after using our products have passed the SAP-C01 New Practice Questions Ppt exam.
SAP-C01 PDF DEMO:
QUESTION NO: 1
A large company experienced a drastic increase in its monthly AWS spend. This is after
Developers accidentally launched Amazon EC2 instances in unexpected regions. The company has established practices around least privileges for Developers and controls access to on-premises resources using Active Directory groups. The company now wants to control costs by restricting the level of access that Developers have to the AWS Management Console without impacting their productivity. The company would also like to allow Developers to launch Amazon EC2 in only one region, without limiting access to other services in any region.
How can this company achieve these new security requirements while minimizing the administrative burden on the Operations team?
A. Set up SAML-based authentication tied to an IAM role that has the PowerUserAccess managed policy attached to it. Attach a customer managed policy that denies access to Amazon EC2 in each region except for the one required.
B. Create an IAM user for each Developer and add them to the developer IAM group that has the
PowerUserAccess managed policy attached to it. Attach a customer managed policy that allows the
Developers access to Amazon EC2 only in the required region.
C. Set up SAML-based authentication tied to an IAM role that has an AdministrativeAccess managed policy attached to it. Attach a customer managed policy that denies access to Amazon EC2 in each region except for the one required.
D. Set up SAML-based authentication tied to an IAM role that has a PowerUserAccess managed policy and a customer managed policy that deny all the Developers access to any AWS services except AWS Service Catalog. Within AWS Service Catalog, create a product containing only the EC2 resources in the approved region.
Answer: A
Explanation
The tricks here are: - SAML for AD federation and authentication - PowerUserAccess v s AdministrativeAccess. (PowerUSer has less privilege, which is the required once for developers).
Admin, has more rights. The description of "PowerUser access" given by AWS is "Provides full access to AWS services and resources, but does not allow management of Users and groups."
QUESTION NO: 2
A retail company is running an application that stores invoice files in Amazon S3 bucket and metadata about the files in an Amazon. The S3 bucket and DynamoDB table are in us-east-1. The company wants to protect itself from data corruption and loss of connectivity to either Region.
Which option meets these requirements?
A. Create a DynamoDB global table to replicate data between us-east-1 and eu-west-1. Enable versioning on the S3 bucket. Implement strict ACLs on the S3 bucket.
B. Create a DynamoDB global table to replicate data between us-east-1 and eu-west-1. Enable continuous backup on the DynamoDB table in us-east-1. Set up S3 cross-region replication from us- east-1 to eu-west-1.
C. Create a DynamoDB global table to replicate data between us-east-1 and eu-west-1. Enable continuous backup on the DynamoDB table in us-east-1. Enable versioning on the S3 bucket.
D. Create an AWS Lambda function triggered by Amazon CloudWatch Events to make regular backups of the DynamoDB table. Set up S3 cross-region replication from us-east-1 to eu-west-1. Set up MFA delete on the S3 bucket in us-east-1.
Answer: C
Explanation
https://aws.amazon.com/blogs/aws/new-cross-region-replication-for-amazon-s3/
QUESTION NO: 3
A company collects a steady stream of 10 million data records from 100,000 sources each day. These records are written to an Amazon RDS MySQL DB. A query must produce the daily average of a data source over the past 30 days. There are twice as many reads as writes. Queries to the collected data are for one source ID at a time.
How can the Solutions Architect improve the reliability and cost effectiveness of this solution?
A. Use Amazon DynamoDB with the source ID as the partition key and the timestamp as the sort key.
Use a Time to Live (TTL) to delete data after 30 days.
B. Use Amazon Aurora with MySQL in a Multi-AZ mode. Use four additional read replicas.
C. Ingest data into Amazon Kinesis using a retention period of 30 days. Use AWS Lambda to write data records to Amazon ElastiCache for read access.
D. Use Amazon DynamoDB with the source ID as the partition key. Use a different table each day.
Answer: A
Explanation
https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Introduction.html
QUESTION NO: 4
A company wants to migrate its website from an on-premises data center onto AWS. At the same time, it wants to migrate the website to a containerized microservice-based architecture to improve the availability and cost efficiency. The company's security policy states that privileges and network permissions must be configured according to best practice, using least privilege.
A Solutions Architect must create a containerized architecture that meets the security requirements and has deployed the application to an Amazon ECS cluster.
What steps are required after the deployment to meet the requirements? (Choose two.)
A. Apply security groups to the tasks, and use IAM roles for tasks to access other resources.
B. Apply security groups to Amazon EC2 instances, and use IAM roles for EC2 instances to access other resources.
C. Create tasks using the awsvpc network mode.
D. Create tasks using the bridge network mode.
E. Apply security groups to the tasks, and pass IAM credentials into the container at launch time to access other resources.
Answer: A,C
Explanation
https://aws.amazon.com/about-aws/whats-new/2017/11/amazon-ecs-introduces-awsvpc- networking-mode-for-co
https://amazonaws-china.com/blogs/compute/introducing-cloud-native-networking-for-ecs- containers/
https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-iam-roles.html
QUESTION NO: 5
A company that provides wireless services needs a solution to store and analyze log files about user activities.
Currently, log files are delivered daily to Amazon Linux on Amazon EC2 instance. A batch script is run once a day to aggregate data used for analysis by a third-party tool. The data pushed to the third- party tool is used to generate a visualization for end users. The batch script is cumbersome to maintain, and it takes several hours to deliver the ever-increasing data volumes to the third-party tool. The company wants to lower costs, and is open to considering a new tool that minimizes development effort and lowers administrative overhead. The company wants to build a more agile solution that can store and perform the analysis in near-real time, with minimal overhead. The solution needs to be cost effective and scalable to meet the company's end-user base growth.
Which solution meets the company's requirements?
A. Use an Amazon Kinesis agent running on an EC2 instance to collect and send the data to an
Amazon Kinesis Data Firehose delivery stream. The Kinesis Data Firehose delivery stream will deliver the data to Amazon S3. Use an AWS Lambda function to deliver the data from Amazon S3 to Amazon
ES. Use Kibana to visualize the data.
B. Use an Amazon Kinesis agent running on an EC2 instance in an Auto Scaling group to collect and send the data to an Amazon Kinesis Data Forehose delivery stream. The Kinesis Data Firehose delivery stream will deliver the data directly to Amazon ES. Use Kibana to visualize the data.
C. Use an in-memory caching application running on an Amazon EBS-optimized EC2 instance to capture the log data in near real-time. Install an Amazon ES cluster on the same EC2 instance to store the log files as they are delivered to Amazon EC2 in near real-time. Install a Kibana plugin to create the visualizations.
D. Develop a Python script to failure the data from Amazon EC2 in real time and store the data in
Amazon S3. Use a copy command to copy data from Amazon S3 to Amazon Redshift. Connect a business intelligence tool running on Amazon EC2 to Amazon Redshift and create the visualizations.
Answer: B
Explanation
https://docs.aws.amazon.com/firehose/latest/dev/writing-with-agents.html
And our VMware 2V0-32.24 study materials are warmly praised and welcomed by the customers all over the world. According to the research statistics, we can confidently tell that 99% candidates have passed the Scrum SPS exam. Our passing rate of the EXIN PR2F study guide has reached up to 98 to 100 percent up to now, so you cannot miss this opportunity. But our SAP C_S4FCF_2023 exam questions have made it. If the user finds anything unclear in the Adobe AD0-E121 exam questions exam, we will send email to fix it, and our team will answer all of your questions related to the Adobe AD0-E121 actual exam.
Updated: May 28, 2022