Moreover, doing these practice tests will impart you knowledge of the actual H31-161 Valid Exam Guide Materials exam format and develop your command over it. Once you ensure your grasp on the H31-161 Valid Exam Guide Materials questions and answers, evaluate your learning solving the H31-161 Valid Exam Guide Materials practice tests provided by our testing engine. This innovative facility provides you a number of practice questions and answers and highlights the weak points in your learning. Our H31-161 Valid Exam Guide Materials study materials will never disappoint you. And you will get all you desire with our H31-161 Valid Exam Guide Materials exam questions. Our HCIE-Carrier IP (Written) exam prep has taken up a large part of market.
HCIE-Carrier IP H31-161 Their efficiency has far beyond your expectation!
If you try on our H31-161 - HCIE-Carrier IP (Written) Valid Exam Guide Materials exam braindumps, you will be very satisfied with its content and design. It is fast and convenient out of your imagination. Unlike other kinds of exam files which take several days to wait for delivery from the date of making a purchase, our H31-161 Valid Test Answers study materials can offer you immediate delivery after you have paid for them.
Under the guidance of our study materials, you can gain unexpected knowledge. Finally, you will pass the exam and get a Huawei certification. Using our products does not take you too much time but you can get a very high rate of return.
Huawei H31-161 Valid Exam Guide Materials - It can help a lot of people achieve their dream.
In this social-cultural environment, the H31-161 Valid Exam Guide Materials certificates mean a lot especially for exam candidates like you. To some extent, these H31-161 Valid Exam Guide Materials certificates may determine your future. With respect to your worries about the practice exam, we recommend our H31-161 Valid Exam Guide Materials preparation materials which have a strong bearing on the outcomes dramatically. For a better understanding of their features, please follow our website and try on them.
There a galaxy of talents in the 21st century, but professional IT talents not so many. Society need a large number of professional IT talents.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 2
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 3
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 4
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D
QUESTION NO: 5
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
There are so many success examples by choosing our Huawei H19-308_V4.0 guide quiz, so we believe you can be one of them. More and more people choose Huawei Huawei H19-315 exam. If you require any further information about either our Cisco 300-740 preparation exam or our corporation, please do not hesitate to let us know. Our Huawei HP HPE6-A72 exam training materials contains questions and answers. We assume all the responsibilities our Huawei H19-315 simulating practice may bring you foreseeable outcomes and you will not regret for believing in us assuredly.
Updated: May 27, 2022