You just need to pay the relevant money for the H31-161 New Free Study Questions practice materials. Our system will never deduct extra money from your debit cards. Also, your payment information of the H31-161 New Free Study Questions study materials will be secret. Once the user finds the learning material that best suits them, only one click to add the H31-161 New Free Study Questions study tool to their shopping cart, and then go to the payment page to complete the payment, our staff will quickly process user orders online. In general, users can only wait about 5-10 minutes to receive our H31-161 New Free Study Questions learning material, and if there are any problems with the reception, users may contact our staff at any time. Based on the statistics, prepare the exams under the guidance of our H31-161 New Free Study Questions practice materials, the user's pass rate is up to 98% to 100%, And they only need to practice latest H31-161 New Free Study Questions exam dump to hours.
HCIE-Carrier IP H31-161 And you can choose the favorite one.
According to the data that are proved and tested by our loyal customers, the pass rate of our H31-161 - HCIE-Carrier IP (Written) New Free Study Questions exam questions is high as 98% to 100%. Many exam candidates are uninformed about the fact that our Reliable H31-161 Test Dumps File preparation materials can help them with higher chance of getting success than others. It is all about efficiency and accuracy.
With the improvement of people’s living standards, there are more and more highly educated people. To defeat other people in the more and more fierce competition, one must demonstrate his extraordinary strength. Today, getting H31-161 New Free Study Questions certification has become a trend, and H31-161 New Free Study Questions exam dump is the best weapon to help you pass certification.
Huawei H31-161 New Free Study Questions - Just make your own decisions.
According to personal propensity and various understanding level of exam candidates, we have three versions of H31-161 New Free Study Questions study guide for your reference. They are the versions of the PDF, Software and APP online. If you visit our website on our H31-161 New Free Study Questions exam braindumps, then you may find that there are the respective features and detailed disparities of our H31-161 New Free Study Questions simulating questions. And you can free donwload the demos to have a look.
In addition to the lack of effort, you may also not make the right choice on our H31-161 New Free Study Questions exam questions. A good choice can make one work twice the result with half the effort, and our H31-161 New Free Study Questions study materials will be your right choice.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 2
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 3
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 4
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
QUESTION NO: 5
As shown in the figure, DUT stands for the device under test and RTA is used to support the test. Which combination of the following configurations is mandatory for fast convergence?
1. BFD
2. Minimum LSP refreshing interval
3. Most sensitive SPF timer
4. Minimum Hello packet sending interval
5. Minimum LSP sending interval
6. Longest computing time of SPF slices
7. Minimum LSP retransmission interval
8. Minimum LSP generation time
9. Flash-flood
10. GR function
11. Setting cost-style to wide
A. 1, 2, 3, 5, 7, 8, 9
B. 3, 5, 6
C. 3, 5, 6, 8, 9C.1, 3, 5, 6, 9
Answer: C
So our SAP C-TS462-2023 real questions may help you generate financial reward in the future and provide more chances to make changes with capital for you and are indicative of a higher quality of life. SAP C_IEE2E_2404 - Nowadays, the certification has been one of the criteria for many companies to recruit employees. We want to finish long term objectives through customer satisfaction and we have achieved it already by our excellent HP HPE0-V28-KR exam questions. Obtaining the Microsoft AI-900 certification is not an easy task. As a key to the success of your life, the benefits that SAP C-THR82-2405 exam guide can bring you are not measured by money.
Updated: May 27, 2022