The users of 350-401 Valid Test Vce Free exam dumps cover a wide range of fields, including professionals, students, and students of less advanced culture. This is because the language format of our study materials is easy to understand. No matter what information you choose to study, you don’t have to worry about being a beginner and not reading data. We have an authoritative production team, after you purchase 350-401 Valid Test Vce Free study materials, our professions can consolidate important knowledge points for you, and we guarantee that your 350-401 Valid Test Vce Free practice quiz is tailor-made. The last but not least, we can provide you with a free trial service, so that customers can fully understand our format before purchasing our 350-401 Valid Test Vce Free training guide, which can be an unparalleled trial experience compared to other counterparts. No other 350-401 Valid Test Vce Free study materials or study dumps will bring you the knowledge and preparation that you will get from the 350-401 Valid Test Vce Free study materials available only from Omgzlook.
Our 350-401 Valid Test Vce Free exam materials have plenty of advantages.
The software version of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Test Vce Free study engine is designed to simulate a real exam situation. As the leader in this career, we have been considered as the most popular exam materials provider. And our Valid 350-401 Test Review practice questions will bring you 100% success on your exam.
It can be said that 350-401 Valid Test Vce Free test guide is the key to help you open your dream door. We have enough confidence in our products, so we can give a 100% refund guarantee to our customers. 350-401 Valid Test Vce Free exam questions promise that if you fail to pass the exam successfully after purchasing our product, we are willing to provide you with a 100% full refund.
Cisco 350-401 Valid Test Vce Free - And the quality of our exam dumps are very high!
In order to survive in the society and realize our own values, learning our 350-401 Valid Test Vce Free practice engine is the best way. Never top improving yourself. The society warmly welcomes struggling people. You will really benefit from your correct choice. Our 350-401 Valid Test Vce Free study materials are ready to help you pass the exam and get the certification. You can certainly get a better life with the certification. Please make a decision quickly. We are waiting for you to purchase our 350-401 Valid Test Vce Free exam questions.
And here, fortunately, you have found the 350-401 Valid Test Vce Free exam braindumps, a learning platform that can bring you unexpected experiences. Today, in an era of fierce competition, how can we occupy a place in a market where talent is saturated? The answer is a certificate.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
SAP C_CPI_2404 - If you choose Omgzlook, success is not far away for you. If you buy our Salesforce OmniStudio-Consultant study questions, you can enjoy the similar real exam environment. Microsoft AZ-104-KR - However, you can choose many ways to help you pass the exam. Our Adobe AD0-E207 study materials have three versions which are versions of PDF, Software/PC, and APP/Online. You can free download part of Omgzlook's exercises and answers about Cisco certification Lpi 300-300 exam as a try, then you will be more confident to choose our Omgzlook's products to prepare your Cisco certification Lpi 300-300 exam.
Updated: May 28, 2022