We can receive numerous warm feedbacks every day. Our reputation is really good. After you have learned about the achievements of 350-401 Valid Test Simulator Free study questions, you will definitely choose us! This greatly improves the students' availability of fragmented time. So you can achieve your 350-401 Valid Test Simulator Free certification easily without disrupting your daily routine. When you want to correct the answer after you finish learning, the correct answer for our 350-401 Valid Test Simulator Free test prep is below each question, and you can correct it based on the answer.
CCNP Enterprise 350-401 Victory won't come to me unless I go to it.
Our experts made significant contribution to their excellence of the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Test Simulator Free study materials. All Vce 350-401 Download test questions offered by us are tested and selected by our senior experts in IT filed, which only need little time to focus on the practice and the preparation. We provide our customers with the most reliable learning materials about Vce 350-401 Download certification exam and the guarantee of pass.
Just look at the comments on the 350-401 Valid Test Simulator Free training guide, you will know that how popular they are among the candidates. Our 350-401 Valid Test Simulator Free exam braindumps have become a brand that is good enough to stand out in the market. The high quality product like our 350-401 Valid Test Simulator Free study quiz has no need to advertise everywhere, and exerts influential effects which are obvious and everlasting during your preparation.
Now, quickly download Cisco 350-401 Valid Test Simulator Free free demo for try.
Being anxious for the 350-401 Valid Test Simulator Free exam ahead of you? Have a look of our 350-401 Valid Test Simulator Free training engine please. Presiding over the line of our practice materials over ten years, our experts are proficient as elites who made our 350-401 Valid Test Simulator Free learning questions, and it is their job to officiate the routines of offering help for you. All points are predominantly related with the exam ahead of you. You will find the exam is a piece of cake with the help of our 350-401 Valid Test Simulator Free study materials.
With the 350-401 Valid Test Simulator Free training pdf, you can get the knowledge you want in the actual test, so you do not need any other study material. If the 350-401 Valid Test Simulator Free exam is coming and the time is tense, it is better to choose our 350-401 Valid Test Simulator Free test engine dumps.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
And so many of our loyal customers have achieved their dreams with the help of our SAP C-ABAPD-2309 exam questions. Immediately after you have made a purchase for our SAP C-S4TM-2023 practice dumps, you can download our SAP C-S4TM-2023 study materials to make preparations. If you have bought the SAP C-THR70-2404 exam questions before, then you will know that we have free demos for you to download before your purchase. Pegasystems PEGACPSSA23V1 - What’s more, our coupon has an expiry date. By concluding quintessential points into IBM C1000-162 actual exam, you can pass the exam with the least time while huge progress.
Updated: May 28, 2022