Our 350-401 Valid Test Dumps Questions exam questions have been widely acclaimed among our customers, and the good reputation in industry prove that choosing our study materials would be the best way for you, and help you gain the 350-401 Valid Test Dumps Questions certification successfully. With about ten years’ research and development we still keep updating our 350-401 Valid Test Dumps Questions prep guide, in order to grasp knowledge points in accordance with the exam, thus your study process would targeted and efficient. According to the survey, the average pass rate of our candidates has reached 99%. According to the research statistics, we can confidently tell that 99% candidates after using our products have passed the 350-401 Valid Test Dumps Questions exam. Our 350-401 Valid Test Dumps Questions learning questions engage our working staff in understanding customers’ diverse and evolving expectations and incorporate that understanding into our strategies, thus you can 100% trust our 350-401 Valid Test Dumps Questions exam engine. The content of our 350-401 Valid Test Dumps Questions practice engine is based on real exam by whittling down superfluous knowledge without delinquent mistakes rather than dropping out of reality.
CCNP Enterprise 350-401 Our company is rated as outstanding enterprise.
Therefore, with our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Test Dumps Questions study materials, you can easily find the key content of the exam and review it in a targeted manner so that you can successfully pass the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Test Dumps Questions exam. We are trying our best to meet your demands. Why not give our Cisco study materials a chance? Our products will live up to your expectations.
Our service staff will help you solve the problem about the 350-401 Valid Test Dumps Questions training materials with the most professional knowledge and enthusiasm. We believe that can completely dispel your worries on 350-401 Valid Test Dumps Questions exam braindumps. So please feel free to contact us if you have any trouble on our 350-401 Valid Test Dumps Questions practice questions.
Cisco 350-401 Valid Test Dumps Questions - They compile each answer and question carefully.
Omgzlook is a website which is able to speed up your passing the Cisco certification 350-401 Valid Test Dumps Questions exams. Our Cisco certification 350-401 Valid Test Dumps Questions exam question bank is produced by Omgzlook's experts's continuously research of outline and previous exam. When you are still struggling to prepare for passing the Cisco certification 350-401 Valid Test Dumps Questions exams, please choose Omgzlook's latest Cisco certification 350-401 Valid Test Dumps Questions exam question bank, and it will brings you a lot of help.
In order to meet the demands of all people, these excellent experts and professors from our company have been working day and night. They tried their best to design the best 350-401 Valid Test Dumps Questions certification training dumps from our company for all people.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Salesforce B2C-Commerce-Developer - We can let you spend a small amount of time and money and pass the IT certification exam at the same time. If you do not receive our EC-COUNCIL 312-39 study materials, please contact our online workers. Omgzlook has more than 10 years experience in IT certification Fortinet NSE7_LED-7.0 exam training, including questions and answers. Our three versions of SAP C-SAC-2402 exam braindumps are the PDF, Software and APP online and they are all in good quality. Because it contains all the questions of Cisco SAP C-BW4H-214 examination.
Updated: May 28, 2022